No IRST/RAID?
Good luck with that, I thought I was on the trail, but no luck.
Bummer, you probably need an add-in USB card.
USB connected mouse/keyboard? Do you have AsMedia USB ports? If so, try that.
Apparently, no further help is forthcoming. Sad...
firmware missing system firmware...
OK, I used my USB-connected external nvme drive and got the untouched .iso to load, but the modded .iso (created per the the instructions set...
I get this: [IMG] Then this: [IMG] Settings: [img] Directories (E:/ is USB where noted .iso are): [IMG]
6. the second USB drive is recognized, files transferred OK. [img]
I have everything. I can create the RAID0 array just fine. I cannot get W7 to install on the RAID0 array on the Z390 motherboard. The two...
I wonder if it has anything to do with the IRST OROM?
Already tried that driver, all of the 15.x, 16.x, and 17.x drivers from win-raid (as I had previously mentioned). What Fernando concluded:...
OK, made the USB. Hardware ID of the Intel RAID controller is: 8086&DEV_2822&SUBSYS_10553842&REV_10.
Which IRST driver will be used? My .iso is 3.34GB.
I have tried loading all the IRST drivers found on win-raid.com from 15.x, 16.x, and 17.x during the installation routine. None allowed W7...
That would be great.
The install disk does not recognize the array. As in; there is no drive to install on. No IRST drivers for Z390 and W7 exist, to the best of my...
Here: [img] After three attempts, that is; making the WintoGo USB, I finally got my test rig (Z77) to successfully boot WintoGo made with...
I am trying to create the WintoGo USB from a W7 rig. That is the problem, then?
Maybe for you, but for me there is not.