Desktop kernel panic help needed

Discussion in 'PC Hardware' started by kaos420, Aug 16, 2015.

  1. kaos420

    kaos420 MDL Senior Member

    Jul 30, 2009
    270
    13
    10
    #1 kaos420, Aug 16, 2015
    Last edited: Aug 16, 2015
    ok so i have a cool master cm 690 ii advance
    gigabyte ga- z77x ud3h rev 1.1 motherboard bios 20E
    xfx r7 260x cdf4 double density graphics card
    2 x 4gb g skills ripjaw series 240 pin ddr3 1600 pc312800 memory
    i5 34703.2ghz
    apevia aq700w psu
    have 2 drives as well i dvd burner one blue ray.
    4 140mm fans 3 120mm and 2 80mm

    every test for cpu size i see says mine shgould be enough
    my issue is wouldnt wake up from screen off after harddrives went to sleep fix that by turning to never for harddrives. but i keep getting kernel panics. on windows 10 x64 im ready to loose my mind wondering if my psu is bad or not enough? some of the panics ive gotten ;;

    - System

    - Provider

    [ Name] Microsoft-Windows-Kernel-Power
    [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

    EventID 41

    Version 3

    Level 1

    Task 63

    Opcode 0

    Keywords 0x8000200000000002

    - TimeCreated

    [ SystemTime] 2015-08-15T21:59:39.061793700Z

    EventRecordID 12175

    Correlation

    - Execution

    [ ProcessID] 4
    [ ThreadID] 8

    Channel System

    Computer DESKTOP-F8V0S2J

    - Security

    [ UserID] S-1-5-18


    - EventData

    BugcheckCode 234
    BugcheckParameter1 0xffffe001154f4040
    BugcheckParameter2 0x0
    BugcheckParameter3 0x0
    BugcheckParameter4 0x0
    SleepInProgress 0
    PowerButtonTimestamp 0
    BootAppStatus 0



    at this point im lost before i wast my time and reinstall os anyone see something or something i can check to figure this out? pc runs great when your at it. tired of coming back to sign in screen

    i did find the previous owner had slots 1 &3 with memeory installed. i just changed it to 1 &2 per manual for dual also ran memeory diagnostics came back fine.
     
  2. kaos420

    kaos420 MDL Senior Member

    Jul 30, 2009
    270
    13
    10
    ok so i figured it out. got everything up and going same s**t again. what i did was install little at a time to see what causes it. less then 3 week old graphics card. does not like over clocking. bump a little bit works fine. but does the thing where screen wont wake. s**t oc off thorough amd overdrive and no issues. last time was msi burner. so in conclusion either my xfx r7 260x cdfr double density card doesnt like to be bumped a little. or amd drivers are crap. .replacing my psu with a 740 rosewill hive soon. so little more power. see if that helps. but if not guess not oc on this card. still with oc off i get ultra in games like skyrim. but i cant leave well enough alone.
     
  3. LatinMcG

    LatinMcG Bios Borker

    Feb 27, 2011
    5,711
    1,606
    180
    i stay away from ultra settings.. high is good on most games
     
  4. kaos420

    kaos420 MDL Senior Member

    Jul 30, 2009
    270
    13
    10
    Runs fine on ultra with out me messing with it. But as soon as amd over drives on and kicked up when it does it. Ultra runs fine on the card and no issue with out gpu o.c.i guess I'll leave card alone or mess more when I have more power. Card does call for a 500 supply mine is 700 but lots of fans and drives . as well as cpu oc to 3.8 4.0 on turbo. Plus the psu brand... Eh.read bad things. Thanks for your time.