Gigabyte GA-X58A-UD5 (rev. 2.0)

Discussion in 'BIOS Mods' started by jeff2012, May 14, 2012.

  1. jeff2012

    jeff2012 MDL Member

    Mar 31, 2010
    145
    5
    10
    #1 jeff2012, May 14, 2012
    Last edited: May 14, 2012
    Hi,

    All was ok, but I accidently unistalled my slic 2.1 frpm my bios by experimenting with Daz loader.

    I'd like to ask the following.
    For two years I was fine, then put in a new videocard, power supply and took out two other components, I then got the 30 days left to activate notice. In the future, when changing hardware what is the easist way to return it to an activated state?

    In the meantime here is the bios mod I need, also can i use the gigabyte utility to flash the bios withion windows, I cannot seem to master the skillset of flashing in dos.

    Many thanks, searched previous posts but links were inactive.

    Lastly, is a DAZ loader inserting a slic table into a bios (which I assume it does) the same as a bios being modded once a slic is put into it?

    JAS

    Not sure which bios to choose beta vs non beta but the one that supports 3tb+ hard drives sounds good, but is it safe to use a beta bios?

    Gigabyte GA-X58A-UD5 (rev. 2.0)
    Motherboard: Gigabyte GA-X58A-UD5 (rev. 2.0)
    BIOS Version: FF1
    BIOS Type: Award
    SLIC: Gigabyte
    Link http://download.gigabyte.us/FileList/BIOS/mb_bios_ga-x58a-ud5_2.x_ff1.exe
     
  2. Tito

    Tito Super Mod / Adviser
    Staff Member

    Nov 30, 2009
    17,209
    14,764
    340
    It was modded before ;)

    Ipmark, can you please update this post??
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. jeff2012

    jeff2012 MDL Member

    Mar 31, 2010
    145
    5
    10
    Anxiously awaiting lol thnx
     
  4. LatinMcG

    LatinMcG Bios Borker

    Feb 27, 2011
    5,263
    1,422
    180
    http://www.mediafire.com/?51gyiofb3nf6xt7
    remake. flash from dos. usb. autoexec.bat should do automaticaly.
    if using freedos and stops at A:\_ (blinking cursor)
    u type
    c: (press enter)
    then type
    autoexec.bat (press enter)
     
  5. jeff2012

    jeff2012 MDL Member

    Mar 31, 2010
    145
    5
    10
    #5 jeff2012, May 14, 2012
    Last edited: May 14, 2012
    (OP)
    Thank you, so there is no way to do this within gigabyte's do it yourself within windows bios updater, right?


     
  6. Tito

    Tito Super Mod / Adviser
    Staff Member

    Nov 30, 2009
    17,209
    14,764
    340
    Flash from DOS is always recommended :)
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. conghoaxa1

    conghoaxa1 MDL BIOS/EFI Modifier

    Oct 30, 2009
    2,069
    1,188
    90