This is an M460 by Fujitsu Siemens. The board is a D2608-A11 with the Intel® iX38 Chipset. I have been told by the support, that the on-board RAID controller is by Intel, the model: 28201IU. On the FTS download site, the driver is also listed under this model: Intel® 82801IU SATA RAID Controller (Onboard on D2608-A1x) But I tried to do a repair install of XP on the machine, and when I pressed f6 to include my own driver, that model (82801IU) wasn't listed.
Intel ICH9R 82801IU %PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_2822&CC_0104 PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc = "Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller"
10 q. Now yesterday I haven't gotten around to tell you my actual concern. I was able to access the data off one of the RAID disks. I use g4l to do a 1to1 copy to another SATA disk. What I want to know is how can I include the f6 driver into the old installation on the new drive? You see, the boot process does not go through properly. I guess this is due to the driver that is stored on the disk, which is a copy of the RAID disk. So the driver on the new drive is the old RAID driver. But, as I have disabled RAID and enabled AHCI in the BIOS, I need to modify the old installation on the new disk to include the ICH9R AHCI driver. How can i do that?