Help guys, Unable to activate windows 7 ultimate

Discussion in 'Windows 7' started by helllraiserz, Jun 7, 2011.

  1. helllraiserz

    helllraiserz MDL Novice

    Jun 7, 2011
    1
    0
    0
    I have a Samsung i3 core processor laptop computer and for the last two days i have been trying to install windows 7 ultimate on to it,

    I have used all the activation tools including daz loader, se7en, hazar, Windows 7 Loader eXtreme Edition 3.5.0.3, Windows 7 OEM Brander & Activator 2.0, under various seperate fresh installations for each nd every one of the loaders.

    when ever i install a loader nd try to reboot it gives out a blank screen or some times just go freezed. To over come that i used a method to, by utilizing the start up repair> cmd prompt> bootsect.exe/nt60 ALL/force, thus finally booting in to the OS. After doing so when i check into my computer properties it shows that is not activated.

    The problem is no matter how many times i do that am unable to activate my windows, i have tried three different windows 7 installation disks and they have fetched me nothing but the same problem a raises every time.

    plssss guys get me some ideas or other methods to activate windows.... thanks in advance.
     
  2. hbhb

    hbhb MDL Expert

    Dec 15, 2010
    1,017
    263
    60
    dont need another method to activate, u just need to get one to work.
    Is your win7 copy clean?
    When you use daz, do you have all the parameters right?
    did you try and use like OEM dump, or Slic to verify if certificate and slic are correct?

    Help is on the way dude.
     
  3. velislav25

    velislav25 MDL Novice

    Jun 9, 2011
    3
    0
    0
    Guys the samsung bios doesnt have slic 2.1 and also has some issues with activating it.Some say that their windows freezes up at the windows 7 boot logo(starting Windows).And still don't know how to fix it.They say they've tried all the activators and does not helped them.So as a result dont buy a samsung laptop ;)
     
  4. DAz999

    DAz999 MDL Member

    May 19, 2007
    132
    34
    10
    #4 DAz999, Jun 10, 2011
    Last edited: Jun 10, 2011
    ok i have just done a Samsung i3 core processor laptop install and it does have SLIC 2.1.

    !. use a Clean Windows Ultimate x64 SP1 installation disk, you can get an untouch win7 sp1 x64 from this forum. (do not enter a serial key) after the installation has completed goto Users in control panel and turn UAC off then re boot.

    2. Install this update from here http://forums.mydigitallife.net/threads/27302-Windows6.1-KB947821-v12-Windows-Updates-Fix-for-many-issues the x64 one. then reboot

    3. Use DAZ loader 2.03 make sure Samsung is selected for everything, once you press ok it will disappear, wait until you see a screen saying it has successfully installed the licence then re boot and you should be licensed.

    If you need extra drivers after install you can get them from the samsung website
     
  5. Cr4z33

    Cr4z33 MDL Novice

    Jul 13, 2009
    35
    0
    0
    h t t p : / / forums.mydigitallife.net/threads/8357-Learn-amp-manually-activate-windows-Vista-amp-Windows-7-offline
     
  6. vuzantim

    vuzantim MDL Novice

    Jun 10, 2011
    1
    0
    0
    Esperimente chew7 v1.1 e boa sorte, abraƧoooooo!
    vuzantim
     
  7. Josh Cell

    Josh Cell MDL Developer

    Jan 8, 2011
    3,519
    7,108
    120
    Please post in English Language, is default comunication language on this forum ;)
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  8. jr2008

    jr2008 MDL Novice

    Aug 5, 2011
    2
    0
    0
    Hi DaZ, First Thanks a lot for the loader which successfully activate & load windows 7 ultimate for my & my sister's hp pro book 4420s, my friend's IBM lenevo Thinkpad SL 400 but It will not work for my brother's Samsung R439 core i3 laptop. After installing the loder & restart the laptop it will just show windows loding nothing else... I wait upto 2 hours but still have the black screen. I tried your loader v1.7.7 first then v2.0.5 after deleting all partition & installing windows 7 ultimate but no solution. I have found that RwV1.5 software does not shows the SLIC tab for Samsung but for HP it shows the tab and iinfo. so dear DAZ would please help me on this as my brother facing difficulties on doing his daily works? I believe that you can give a best & easiest solution for him. Looking forward... Thanks....
     
  9. Daz

    Daz MDL Developer / Admin
    Staff Member

    Jul 31, 2009
    9,481
    66,553
    300
    @ jr2008
    Select to ignore the existing SLIC from the advanced options and also select to use the legacy mode. Press install and it should work :)
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  10. jr2008

    jr2008 MDL Novice

    Aug 5, 2011
    2
    0
    0
    Thanks buddy... Thanks a lot... You really rock... Selecting "ignore the existing SLIC" from the advanced options & selecting "legacy mode" successfully activate the windows 7 on samsung R439-DA0A core-i3. I used your latest loader -2.0.6. Thanks again.... And a suggestion for others - try not to buy Samsung Laptop, it creates other problems like - Norton Ghost 15 did not boot from bootable cd whereas HP, Dell & Lenevo easily do... and many others probs- but who bought and/or will buy samsung & want to activate Windows 7, should thanks DaZ cause its him who make our world easy.....jr
     
  11. dkboogie

    dkboogie MDL Novice

    Sep 21, 2012
    5
    0
    0
    daz, can you please help me with my samsung laptop windows 7 activation?
     
  12. anarchist9027

    anarchist9027 MDL Expert

    Oct 30, 2010
    1,320
    667
    60
    It would be recommended that you give details in your Samsung like the model and/or BIOS version. Chances are it is going to work so just give it a shot ;)
     
  13. dkboogie

    dkboogie MDL Novice

    Sep 21, 2012
    5
    0
    0
    samsung model: np300e4z
    bios: phoenix secure core tiano nb version 2.1 03qb
     
  14. anarchist9027

    anarchist9027 MDL Expert

    Oct 30, 2010
    1,320
    667
    60
    Just try installing it.
     
  15. dkboogie

    dkboogie MDL Novice

    Sep 21, 2012
    5
    0
    0
    i tried installing it, when its done, the system will reboot right? then the windows will not even start, its just black screen and blinking..
     
  16. anarchist9027

    anarchist9027 MDL Expert

    Oct 30, 2010
    1,320
    667
    60
    how long does it stay blinking?
     
  17. anarchist9027

    anarchist9027 MDL Expert

    Oct 30, 2010
    1,320
    667
    60
    Try this, this is straight out of the Windows Loader read me:

    Is Windows failing to boot after you installed the loader? Just do the following.


    * Boot up the PC from your Windows installation disk
    * Press and hold SHIFT and then press F10
    * Input "bootsect.exe /nt60 SYS /force" (without quotes)
    * Restart the PC


    Note: If the above doesn't fix your boot issue then use the command "bootsect.exe /nt60 ALL /force" instead. Just make sure you remove all USB flash drives before you use the command.
     
  18. dkboogie

    dkboogie MDL Novice

    Sep 21, 2012
    5
    0
    0
    thanks a lot.. hope it will work.
     
  19. anarchist9027

    anarchist9027 MDL Expert

    Oct 30, 2010
    1,320
    667
    60
    It should hopefully work for you