Help needed in flashing bios.

Discussion in 'Windows 7' started by Rykov, Aug 5, 2009.

  1. Rykov

    Rykov MDL Novice

    Aug 4, 2009
    16
    0
    0
    #1 Rykov, Aug 5, 2009
    Last edited: Aug 5, 2009
  2. hersounds

    hersounds MDL Junior Member

    Jul 24, 2009
    92
    3
    0
    first everything you have read your motherboard manual instructions, and then home page foxconn,to know what you need and what key touch...then when you are sure flash the bios.

    don't turn off the machine when flashing,or reset or power off...just wait
    the system tell you when you can restart.
     
  3. Rykov

    Rykov MDL Novice

    Aug 4, 2009
    16
    0
    0
    I've fount out that my Mobo supports usb booting. But i dunno where to get the flash utility mentioned in the guide. My PC is a dell vostro and it uses a modified Foxconn G33 M02. So where can i get the flash utility and Autoexc.bat
     
  4. vietlapine

    vietlapine MDL Novice

    Jun 11, 2008
    24
    0
    0
    #5 vietlapine, Aug 5, 2009
    Last edited by a moderator: May 23, 2017
    If you want to do a DOS flash, you can check out the following link.

    http://forums.mydigitallife.net/threads/2105

    Even though it's for recovery procedures, it the way to flash for DOS since I did it for my AMI Bios.

    You don't even need to create a batch file.

    Create the usb boot disk, drop in the awdflash v8.93 program and your BIOS (rename it to bios.bin)

    Once your computer boots into the Dos environment you can just type the command.

    awdflash893.exe bios.bin /py/sn/f/cc/

    and let it flash.

    As always, I'm not responsible for anything that happens but it works for me.
     
  5. Rykov

    Rykov MDL Novice

    Aug 4, 2009
    16
    0
    0
    it keeps on saying bad command.
     
  6. hersounds

    hersounds MDL Junior Member

    Jul 24, 2009
    92
    3
    0
    in my system : biostar tpower i45

    put bios file in pen drive, restart system, press F12 and then select pen drive, the system automatic read my pen drive and show me bios update screen,i select the new bios, press enter,when finish the process and i read "restart your system",all flashing bios process has done.
     
  7. Rykov

    Rykov MDL Novice

    Aug 4, 2009
    16
    0
    0
    i tried again and a lot of stuff came up on the DoS place. I waited until nothing was happening and restarted? How do i know i have Slic 2.1 now? On RW everything, it still says 20 00 00 etc...