Hi, I have a Toshiba Qosmio x305, the motherboard recently died on me so i bought a new one, now when ever i try to install an OS i get blue screens and when i try installing Linux it gives me errors. The only one that i have success with is puppy Linux of a usb pen drive, but only after i manually disable acpi in the command before boot. I think this is a bios related issue is there any way to flash to a newer bios without having windows installed,The only bios i have come across are in .exe format. I have all ready looked in the bios to disable acpi but it does not give me an option. Also before it posts it says engineering release not for production. current bios is phoenix bios ver. v0.11T04 Any help would be greatly appreciated Thank you. - Hugo
if you had bought a mobo.. then u have already got a fresh bios.. i think its not the problem with bios.. have u tried the removing and reinserting the RAM? i once had the same prob. in which windows & linux installation gave me hardware errorlease consult a proper engineer.. with the blue screen error.. but after a few tries. i was just able to live boot the ubuntu linux..even that lasted for just 5-10 min.. after that i got the same blue screen error.. after a long trials.. i just found that my RAM got burned at the extreme corner of it... n i replaced RAM n back to work then
Well the motherboard is not brand new and i think it is an engineering release as it has many options on the bios that my old one did not have like overclocking . I got windows xp to install without acpi but it gave me BSOD in desktop after i plugged in a usb drive. I already tried removing the ram sticks and changing them around still the same. I was going to update the bios in windows xp but i am scared to do it as i think it will blue screen in the process. Also to note i remember when i was installing the motherboard on the on board chip set it said nvidia sample and my old one just says nvidia and the old one was an nvidia 9400 chip set but under linux this one says 9100m g but it still recognizes the 9800m GTS SLI discrete.
hugox30, could you run the Linux utilities "dmidecode", "lshw", and "dmesg" and post the output of each here? I may be able to help.
Ok here is the dmidecode sh-4.1# dmidecode # dmidecode 2.9 SMBIOS 2.5 present. 19 structures occupying 1178 bytes. Table at 0x000F0490. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: TOSHIBA Version: V0.11T04 Release Date: 05/26/2008 Address: 0xE59B0 Runtime Size: 108112 bytes ROM Size: 64 kB Characteristics: PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported BIOS Revision: 0.17 Firmware Revision: 0.17 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: TOSHIBA Product Name: * Version: * Serial Number: * UUID: 2D111656-224A-11DD-A0F3-001EEC39AAF7 Wake-up Type: Power Switch SKU Number: 012345678912345678912345678 Family: ABCDEFGHIJKLMNOPQRSTUVWXYZ Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: TOSHIBA Product Name: JSRAA Version: 1.00 Serial Number: 0123456789AB Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: TOSHIBA Type: Desktop Lock: Not Present Version: N/A Serial Number: None Asset Tag: * Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00001234 Handle 0x0004, DMI type 4, 40 bytes Processor Information Socket Designation: Socket A Type: Central Processor Family: <OUT OF SPEC> Manufacturer: Intel ID: 76 06 01 00 FF FB EB BF Version: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz Voltage: 1.6 V External Clock: 133 MHz Max Speed: 2000 MHz Current Speed: 2400 MHz Status: Populated, Enabled Upgrade: None L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 64 KB Maximum Size: 64 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Through Location: Internal Installed Size: 3072 KB Maximum Size: 512 KB Supported SRAM Types: Burst Pipeline Burst Synchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Unknown System Type: Unified Associativity: Unknown Handle 0x0007, DMI type 9, 13 bytes System Slot Information Designation: PCI Slot 1 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 3.3 V is provided PME signal is supported Handle 0x0008, DMI type 10, 6 bytes On Board Device Information Type: Sound Status: Disabled Description: Realtek HDA-03 Handle 0x0009, DMI type 11, 5 bytes OEM Strings String 1: * Handle 0x000A, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x000B, DMI type 17, 27 bytes Memory Device Array Handle: 0x000A Error Information Handle: No Error Total Width: 40960 bits Data Width: 40960 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: S1 Bank Locator: Bank 1 Type: DDR2 Type Detail: Synchronous Speed: 1066 MHz (0.9 ns) Manufacturer: Unknown Serial Number: 00000000 Asset Tag: 00000000 Part Number: 000000000000000000000000000000000000 Handle 0x000C, DMI type 17, 27 bytes Memory Device Array Handle: 0x000A Error Information Handle: No Error Total Width: 41472 bits Data Width: 41472 bits Size: 2048 MB Form Factor: DIMM Set: 2 Locator: S2 Bank Locator: Bank 2 Type: DDR2 Type Detail: Synchronous Speed: 1066 MHz (0.9 ns) Manufacturer: Unknown Serial Number: 00000000 Asset Tag: 00000000 Part Number: 000000000000000000000000000000000000 Handle 0x000D, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Array Handle: 0x000A Partition Width: 0 Handle 0x000E, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000B Memory Array Mapped Address Handle: 0x000D Partition Row Position: 1 Interleaved Data Depth: 1 Handle 0x000F, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000D Partition Row Position: 1 Interleaved Data Depth: 1 Handle 0x0010, DMI type 22, 26 bytes Portable Battery Location: Rear Manufacturer: TOSHIBA Name: TOSHIBA Chemistry: Lithium Ion Design Capacity: 1000 mWh Design Voltage: 19 mV SBDS Version: BATT_1234 Maximum Error: 100% SBDS Serial Number: 0001 SBDS Manufacture Date: 1980-00-01 OEM-specific Information: 0x00000000 Handle 0x0011, DMI type 32, 20 bytes System Boot Information Status: <OUT OF SPEC> Handle 0x0012, DMI type 127, 4 bytes End Of Table sh-4.1#
dmesg sh-4.1# dmesg Linux version 2.6.33.2 (root@puppypc) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Thu May 27 10:56:32 EST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000afec0000 (usable) BIOS-e820: 00000000afec0000 - 00000000afed4000 (ACPI data) BIOS-e820: 00000000afed4000 - 00000000afee5000 (ACPI NVS) BIOS-e820: 00000000afee5000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI present. last_pfn = 0xafec0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-DBFFF uncachable DC000-EFFFF write-through F0000-FFFFF write-back MTRR variable ranges enabled: 0 base 0C0000000 mask FC0000000 uncachable 1 base 000000000 mask F00000000 write-back 2 base 100000000 mask FC0000000 write-back 3 base 0BFF00000 mask FFFF00000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) initial memory mapped : 0 - 01800000 found SMP MP-table at [c00f6e80] f6e80 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 7fe2e000 - 7fffe6bc Allocated new RAMDISK: 00100000 - 002d06bc Move RAMDISK from 000000007fe2e000 - 000000007fffe6bb to 00100000 - 002d06bb 1926MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (14 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0001000000 - 000144c744] TEXT DATA BSS ==> [0001000000 - 000144c744] #3 [000144d000 - 00014530bc] BRK ==> [000144d000 - 00014530bc] #4 [00000f6e90 - 0000100000] BIOS reserved ==> [00000f6e90 - 0000100000] #5 [00000f6e80 - 00000f6e90] MP-table mpf ==> [00000f6e80 - 00000f6e90] #6 [000009dc00 - 000009e171] BIOS reserved ==> [000009dc00 - 000009e171] #7 [000009e295 - 00000f6e80] BIOS reserved ==> [000009e295 - 00000f6e80] #8 [000009e171 - 000009e295] MP-table mpc ==> [000009e171 - 000009e295] #9 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #11 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #12 [0000100000 - 00002d06bc] NEW RAMDISK ==> [0000100000 - 00002d06bc] #13 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000afec0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000afec0 On node 0 totalpages: 720477 free_area_init_node: node 0, pgdat c13c1ac0, node_mem_map c1455000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3965 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 3854 pages used for memmap HighMem zone: 489396 pages, LIFO batch:31 Using APIC driver default Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override SFI: Simple Firmware Interface v0.7 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. MPTABLE: OEM ID: NVIDIA MPTABLE: Product ID: MCP73 MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages/cpu @c2c00000 s25816 r0 d23336 u2097152 pcpu-alloc: s25816 r0 d23336 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714847 Kernel command line: initrd=initrd.gz pmedia=usbflash BOOT_IMAGE=vmlinuz acpi=off PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:000afec0) Memory: 2851080k/2882304k available (2614k kernel code, 29784k reserved, 1250k data, 328k init, 1973000k highmem) virtual kernel memory layout: fixmap : 0xfff6a000 - 0xfffff000 ( 596 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc13c7000 - 0xc1419000 ( 328 kB) .data : 0xc128d936 - 0xc13c62e0 (1250 kB) .text : 0xc1000000 - 0xc128d936 (2614 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:384 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2400.027 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.05 BogoMIPS (lpj=9600108) Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 Checking 'hlt' instruction... OK. Enabling APIC mode: Flat. Using 1 I/O APICs ExtINT not setup in hardware but reported by MP table ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06 Booting Node 0, Processors #1 Ok. Initializing CPU#1 CPU1: Thermal monitoring handled by SMI Brought up 2 CPUs Total of 2 processors activated (9600.35 BogoMIPS). NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 3.00 entry at 0xfdced, last bus=23 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Interpreter disabled. vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff] pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf] pci 0000:00:03.2: reg 20: [io 0x3040-0x307f] pci 0000:00:03.2: reg 24: [io 0x2000-0x203f] pci 0000:00:03.2: PME# supported from D3hot D3cold pci 0000:00:03.2: PME# disabled pci 0000:00:03.5: reg 10: [mem 0xf0800000-0xf087ffff] pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.1: reg 10: [mem 0xf0888000-0xf08880ff] pci 0000:00:04.1: supports D1 D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.1: PME# disabled pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff] pci 0000:00:08.0: PME# supported from D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:0a.0: reg 10: [mem 0xf0887000-0xf0887fff] pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7] pci 0000:00:0a.0: reg 18: [mem 0xf0888800-0xf08888ff] pci 0000:00:0a.0: reg 1c: [mem 0xf0888400-0xf088840f] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef] pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df] pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7] pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db] pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf] pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:15.0: PME# disabled pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:17.0: PME# disabled pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:18.0: PME# disabled pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:02:00.0: reg 10: [mem 0x8e000000-0x8effffff] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 1c: [mem 0x8c000000-0x8dffffff 64bit] pci 0000:02:00.0: reg 24: [io 0x4000-0x407f] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:00:0c.0: PCI bridge to [bus 02-02] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:0c.0: bridge window [mem 0x8c000000-0x8effffff] pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:03:00.0: reg 10: [mem 0x8a000000-0x8affffff] pci 0000:03:00.0: reg 14: [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:03:00.0: reg 1c: [mem 0x88000000-0x89ffffff 64bit] pci 0000:03:00.0: reg 24: [io 0x5000-0x507f] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:00:0d.0: PCI bridge to [bus 03-03] pci 0000:00:0d.0: bridge window [io 0x5000-0x5fff] pci 0000:00:0d.0: bridge window [mem 0x88000000-0x8affffff] pci 0000:00:0d.0: bridge window [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:04:00.0: reg 10: [mem 0x86000000-0x86ffffff] pci 0000:04:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:04:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref] pci 0000:04:00.0: reg 24: [io 0x6000-0x607f] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:10.0: PCI bridge to [bus 04-04] pci 0000:00:10.0: bridge window [io 0x6000-0x6fff] pci 0000:00:10.0: bridge window [mem 0x86000000-0x86ffffff] pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref] pci 0000:00:15.0: PCI bridge to [bus 05-06] pci 0000:00:15.0: bridge window [io 0x7000-0x7fff] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] pci 0000:00:16.0: PCI bridge to [bus 0b-0b] pci 0000:11:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit] pci 0000:11:00.0: supports D1 pci 0000:11:00.0: PME# supported from D0 D1 D3hot pci 0000:11:00.0: PME# disabled pci 0000:00:17.0: PCI bridge to [bus 11-11] pci 0000:00:17.0: bridge window [mem 0xf0400000-0xf04fffff] pci 0000:17:00.0: reg 10: [mem 0xf0500800-0xf0500fff] pci 0000:17:00.0: reg 14: [mem 0xf0501000-0xf050107f] pci 0000:17:00.0: reg 20: [mem 0xf0500400-0xf050047f] pci 0000:17:00.0: reg 24: [mem 0xf0500000-0xf050007f] pci 0000:17:00.1: reg 10: [mem 0xf0501400-0xf05014ff] pci 0000:17:00.2: reg 10: [mem 0xf0501800-0xf05018ff] pci 0000:17:00.3: reg 10: [mem 0xf0501c00-0xf0501cff] pci 0000:17:00.4: reg 10: [mem 0xf0502000-0xf05020ff] pci 0000:00:18.0: PCI bridge to [bus 17-17] pci 0000:00:18.0: bridge window [mem 0xf0500000-0xf05fffff] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none PCI: pci_cache_line_size set to 64 bytes pci 0000:00:0c.0: address space collision: [mem 0x8c000000-0x8effffff] already in use pci 0000:00:0c.0: can't reserve window [mem 0x8c000000-0x8effffff] pci 0000:00:0d.0: address space collision: [mem 0x88000000-0x8affffff] already in use pci 0000:00:0d.0: can't reserve window [mem 0x88000000-0x8affffff] pci 0000:00:0d.0: address space collision: [mem 0x90000000-0x9fffffff 64bit pref] already in use pci 0000:00:0d.0: can't reserve window [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:00:10.0: address space collision: [mem 0x86000000-0x86ffffff] already in use pci 0000:00:10.0: can't reserve window [mem 0x86000000-0x86ffffff] pci 0000:03:00.0: no compatible bridge window for [mem 0x8a000000-0x8affffff] pci 0000:03:00.0: can't reserve [mem 0x8a000000-0x8affffff] pci 0000:03:00.0: no compatible bridge window for [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:03:00.0: can't reserve [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:03:00.0: no compatible bridge window for [mem 0x88000000-0x89ffffff 64bit] pci 0000:03:00.0: can't reserve [mem 0x88000000-0x89ffffff 64bit] pci 0000:04:00.0: no compatible bridge window for [mem 0x86000000-0x86ffffff] pci 0000:04:00.0: can't reserve [mem 0x86000000-0x86ffffff] pci 0000:02:00.0: no compatible bridge window for [mem 0x8e000000-0x8effffff] pci 0000:02:00.0: can't reserve [mem 0x8e000000-0x8effffff] pci 0000:02:00.0: no compatible bridge window for [mem 0x8c000000-0x8dffffff 64bit] pci 0000:02:00.0: can't reserve [mem 0x8c000000-0x8dffffff 64bit] Expanded resource reserved due to conflict with PCI Bus 0000:04 Switching to clocksource tsc pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f6ea0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbb64, dseg 0x400 PNPBIOS fault.. attempting recovery. PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably PnPBIOS: Check with your vendor for an updated BIOS PnPBIOS: get_dev_node: unexpected status 0x2b PnPBIOS: 0 nodes reported by PnP BIOS; 0 recorded by driver pci 0000:00:0d.0: BAR 9: can't assign mem pref (size 0x18000000) pci 0000:00:0d.0: BAR 8: assigned [mem 0xf1000000-0xf3ffffff] pci 0000:00:0c.0: BAR 8: assigned [mem 0xf4000000-0xf77fffff] pci 0000:00:10.0: BAR 8: assigned [mem 0xce000000-0xcf7fffff] pci 0000:00:09.0: PCI bridge to [bus 01-01] pci 0000:00:09.0: bridge window [io disabled] pci 0000:00:09.0: bridge window [mem disabled] pci 0000:00:09.0: bridge window [mem pref disabled] pci 0000:02:00.0: BAR 3: assigned [mem 0xf4000000-0xf5ffffff 64bit] pci 0000:02:00.0: BAR 3: set to [mem 0xf4000000-0xf5ffffff 64bit] (PCI address [0xf4000000-0xf5ffffff] pci 0000:02:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff] pci 0000:02:00.0: BAR 0: set to [mem 0xf6000000-0xf6ffffff] (PCI address [0xf6000000-0xf6ffffff] pci 0000:02:00.0: BAR 6: assigned [mem 0xf7000000-0xf707ffff pref] pci 0000:00:0c.0: PCI bridge to [bus 02-02] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:0c.0: bridge window [mem 0xf4000000-0xf77fffff] pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:03:00.0: BAR 1: can't assign mem pref (size 0x10000000) pci 0000:03:00.0: BAR 3: assigned [mem 0xf2000000-0xf3ffffff 64bit] pci 0000:03:00.0: BAR 3: set to [mem 0xf2000000-0xf3ffffff 64bit] (PCI address [0xf2000000-0xf3ffffff] pci 0000:03:00.0: BAR 0: assigned [mem 0xf1000000-0xf1ffffff] pci 0000:03:00.0: BAR 0: set to [mem 0xf1000000-0xf1ffffff] (PCI address [0xf1000000-0xf1ffffff] pci 0000:03:00.0: BAR 6: can't assign mem pref (size 0x80000) pci 0000:00:0d.0: PCI bridge to [bus 03-03] pci 0000:00:0d.0: bridge window [io 0x5000-0x5fff] pci 0000:00:0d.0: bridge window [mem 0xf1000000-0xf3ffffff] pci 0000:00:0d.0: bridge window [mem pref disabled] pci 0000:04:00.0: BAR 0: assigned [mem 0xce000000-0xceffffff] pci 0000:04:00.0: BAR 0: set to [mem 0xce000000-0xceffffff] (PCI address [0xce000000-0xceffffff] pci 0000:04:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] pci 0000:00:10.0: PCI bridge to [bus 04-04] pci 0000:00:10.0: bridge window [io 0x6000-0x6fff] pci 0000:00:10.0: bridge window [mem 0xce000000-0xcf7fffff] pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref] pci 0000:00:15.0: PCI bridge to [bus 05-06] pci 0000:00:15.0: bridge window [io 0x7000-0x7fff] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] pci 0000:00:16.0: PCI bridge to [bus 0b-0b] pci 0000:00:16.0: bridge window [io disabled] pci 0000:00:16.0: bridge window [mem disabled] pci 0000:00:16.0: bridge window [mem pref disabled] pci 0000:00:17.0: PCI bridge to [bus 11-11] pci 0000:00:17.0: bridge window [io disabled] pci 0000:00:17.0: bridge window [mem 0xf0400000-0xf04fffff] pci 0000:00:17.0: bridge window [mem pref disabled] pci 0000:00:18.0: PCI bridge to [bus 17-17] pci 0000:00:18.0: bridge window [io disabled] pci 0000:00:18.0: bridge window [mem 0xf0500000-0xf05fffff] pci 0000:00:18.0: bridge window [mem pref disabled] pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0c.0: can't find IRQ for PCI INT A; probably buggy MP table pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: can't find IRQ for PCI INT A; probably buggy MP table pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 pci 0000:00:15.0: can't find IRQ for PCI INT A; probably buggy MP table pci 0000:00:15.0: setting latency timer to 64 pci 0000:00:16.0: can't find IRQ for PCI INT A; probably buggy MP table pci 0000:00:16.0: setting latency timer to 64 pci 0000:00:17.0: can't find IRQ for PCI INT A; probably buggy MP table pci 0000:00:17.0: setting latency timer to 64 pci 0000:00:18.0: can't find IRQ for PCI INT A; probably buggy MP table pci 0000:00:18.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 3 [io 0x0000-0xffff] pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffff] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf77fffff] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf3ffffff] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] pci_bus 0000:04: resource 1 [mem 0xce000000-0xcf7fffff] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf03fffff] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] pci_bus 0000:11: resource 1 [mem 0xf0400000-0xf04fffff] pci_bus 0000:17: resource 1 [mem 0xf0500000-0xf05fffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:04:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 1857k freed platform rtc_cmos: registered platform RTC device (no PNP device found) highmem bounce pool size: 64 pages NTFS driver 2.1.29 [Flags: R/W]. msgmni has been set to 1720 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:0c.0: setting latency timer to 64 pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X pcieport 0000:00:0d.0: setting latency timer to 64 pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X pcieport 0000:00:15.0: setting latency timer to 64 pcieport 0000:00:15.0: irq 26 for MSI/MSI-X pcieport 0000:00:16.0: setting latency timer to 64 pcieport 0000:00:16.0: irq 27 for MSI/MSI-X pcieport 0000:00:17.0: setting latency timer to 64 pcieport 0000:00:17.0: irq 28 for MSI/MSI-X pcieport 0000:00:18.0: setting latency timer to 64 pcieport 0000:00:18.0: irq 29 for MSI/MSI-X isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12b Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded ahci 0000:00:0b.0: version 3.0 ahci 0000:00:0b.0: can't find IRQ for PCI INT A; probably buggy MP table ahci 0000:00:0b.0: irq 30 for MSI/MSI-X ahci 0000:00:0b.0: implemented port map (0xf) contains more ports than nr_ports (2), using nr_ports ahci 0000:00:0b.0: forcing PORTS_IMPL to 0x3 ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio sxs boh ahci 0000:00:0b.0: setting latency timer to 64 scsi0 : ahci scsi1 : ahci ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 30 ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 30 scsi2 : pata_legacy ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: Hitachi HTS543225L9SA00, FBEOC43C, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: ATA-8: TOSHIBA MK2552GSX, LV010M, max UDMA/100 ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK2552GS LV01 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 < sdb5 > sd 1:0:0:0: [sdb] Attached SCSI disk scsi3 : pata_legacy ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 328k freed Floppy drive(s): fd0 is 1.44M input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2 floppy0: no floppy controllers found usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:04.1: can't find IRQ for PCI INT B; probably buggy MP table ehci_hcd 0000:00:04.1: setting latency timer to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:04.1: debug port 1 ehci_hcd 0000:00:04.1: cache line size of 64 is not supported ehci_hcd 0000:00:04.1: irq 5, io mem 0xf0888000 ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 12 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:04.0: can't find IRQ for PCI INT A; probably buggy MP table ohci_hcd 0000:00:04.0: setting latency timer to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:04.0: irq 7, io mem 0xf0886000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 12 ports detected sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:17:00.1: SDHCI controller found [197b:2382] (rev 0) sdhci-pci 0000:17:00.1: can't find IRQ for PCI INT A; probably buggy MP table sdhci-pci 0000:17:00.1: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:17:00.1] using DMA sdhci-pci 0000:17:00.2: SDHCI controller found [197b:2381] (rev 0) sdhci-pci 0000:17:00.2: can't find IRQ for PCI INT A; probably buggy MP table sdhci-pci 0000:17:00.2: Refusing to bind to secondary interface. squashfs: version 4.0 (2009/01/31) Phillip Lougher Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver aufs 2-standalone.tree-33-20100329 fuse init (API version 7.13) usb 1-3: new high speed USB device using ehci_hcd and address 2 scsi4 : usb-storage 1-3:1.0 usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 1-9: new high speed USB device using ehci_hcd and address 3 scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS sd 4:0:0:0: [sdc] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 45 00 00 08 sd 4:0:0:0: [sdc] Assuming drive cache: write through usb-storage: device scan complete sd 4:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 4:0:0:0: [sdc] Assuming drive cache: write through sd 4:0:0:0: [sdc] Attached SCSI removable disk aufs test_add:248:mount[708]: uid/gid/perm /pup_ro2 0/0/0755, 0/0/01777 udev: starting version 151 i2c i2c-0: nForce2 SMBus adapter at 0x3040 i2c i2c-1: nForce2 SMBus adapter at 0x2000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. forcedeth 0000:00:0a.0: can't find IRQ for PCI INT A; probably buggy MP table forcedeth 0000:00:0a.0: setting latency timer to 64 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:1e:ec:39:aa:f7 forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 jmb38x_ms 0000:17:00.3: can't find IRQ for PCI INT A; probably buggy MP table jmb38x_ms 0000:17:00.3: setting latency timer to 64 apm: BIOS not found. ohci1394 0000:17:00.0: can't find IRQ for PCI INT A; probably buggy MP table ohci1394 0000:17:00.0: setting latency timer to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f0500800-f0500fff] Max Packet=[2048] IR/IT contexts=[4/4] HDA Intel 0000:00:08.0: can't find IRQ for PCI INT A; probably buggy MP table hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:00:08.0: setting latency timer to 64 input: PC Speaker as /devices/platform/pcspkr/input/input3 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: 00 (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) cfg80211: Calling CRDA to update world regulatory domain ath9k 0000:11:00.0: can't find IRQ for PCI INT A; probably buggy MP table ath9k 0000:11:00.0: setting latency timer to 64 ath: EEPROM regdomain: 0x65 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x65 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:04.1/usb1/1-9/1-9:1.0/input/input4 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) phy0: Selected rate control algorithm 'ath9k_rate_control' Registered led device: ath9k-phy0::radio Registered led device: ath9k-phy0::assoc Registered led device: ath9k-phy0::tx Registered led device: ath9k-phy0::rx phy0: Atheros AR9280 Rev:2 mem=0xf8640000, irq=10 hda_codec: ALC272: BIOS auto-probing. eth0: no link during initialization. ieee1394: Host added: ID:BUS[0-00:1023] GUID[ffe473fffffffffe] eth0: no link during initialization. eth0: no link during initialization. wlan0: direct probe to AP 00:13:466:e0:22 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:13:466:e0:22 (try 1) wlan0: authenticated wlan0: associate with AP 00:13:466:e0:22 (try 1) wlan0: RX AssocResp from 00:13:466:e0:22 (capab=0x431 status=0 aid=2) wlan0: associated
For some reason i cannot get the lshw or the flashrom i tried different commands and it says command not found
Ok i got the program to read the bios here is the file filedropper/-_22 it gave me a warning that it did not know the type of bios but it let me chose the size so i chose the biggest and it backed up this file
Hi i just tried what u said and it was installing and then it just shut down by itself i tried to turn it on but the lights just come on and no post what know?
Damn. Okay, I need you to tell me any model numbers you can find on the motherboard itself. I tried to match a BIOS file up with the right motherboard type, but that didn't work, so there's a different source of this whole problem.. So I need any model numbers from the mobo. There might be something like "JSRAA" or "ISRAA" or "KSRAA" or something on there, it would be really helpful to know which of those it says. Just basically any information you can get off of it for me would be helpful.
Are you sure that that's what it actually physically says on the motherboard? Because if so, the BIOS file I gave you was for your motherboard.