How is AMD CPU heat spreader glued to pcb ant what thermal paste is on crystal???

Discussion in 'PC Hardware' started by Evgeniy, Jun 19, 2013.

  1. Evgeniy

    Evgeniy MDL Member

    Apr 23, 2010
    173
    10
    10
    How is AMD CPU heat spreader glued to pcb && what thermal grease is on the crystal???

    what kind of glue???
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. fasterboy

    fasterboy MDL Novice

    Jun 19, 2013
    9
    1
    0
    I don't know what chemical compound they use. But if u are not using phenom or fx quad core or higher then u simply clean that paste between heatset sink and cpu.
     
  3. MrMagic

    MrMagic MDL Guru

    Feb 13, 2012
    5,702
    3,705
    180
    FX chips have the IHS soldered onto the CPU, you'll likely kill your chip trying to de-lid it
     
  4. Evgeniy

    Evgeniy MDL Member

    Apr 23, 2010
    173
    10
    10
    #4 Evgeniy, Jun 19, 2013
    Last edited: Jun 19, 2013
    (OP)
    its amd 4400+.

    ouance again what kind of glue && what kind of grease

    btw

    there is no need to change thermal grease on fx or phenom procesors cause the original grease is still ok at this point in time.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  5. MrMagic

    MrMagic MDL Guru

    Feb 13, 2012
    5,702
    3,705
    180
    Why are you even bothering with a 4400+ ? You could cool that thing with a tea-bag

    You have the chip, you find out
     
  6. Evgeniy

    Evgeniy MDL Member

    Apr 23, 2010
    173
    10
    10
    Nope after a 30 min of stress test temp skyrockets to 100 C and dies with a fx-8150 stock cooler(more than anough).

    That is why i am suspicios about termal compound under the hood.

    Or it could be bad thermal sensor.

    I need this cpu for my web/nas/nagios linux server.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. zen45

    zen45 MDL Senior Member

    Feb 25, 2010
    317
    297
    10
    are you looking for artic silver paste to go between the cpu and the cpu fan ? the FX-8150 is a AMD cpu and fits into a AM3+ socket
     
  8. MrMagic

    MrMagic MDL Guru

    Feb 13, 2012
    5,702
    3,705
    180
    I doubt it is a problem under the IHS, either the heatsink is not fully touching the CPU, or the paste between heatsink and CPU is bad, or yea sensor problem
     
  9. fasterboy

    fasterboy MDL Novice

    Jun 19, 2013
    9
    1
    0
    if overheating as u mention cpu temperature goes to 100 degeree celcius occurs then motherboard's bios should turned off motherboard off for few minutes and doesn't allow to on between these few minutes .
    if this won't happend then this is false temperature alert just ignore this.