How to flash a modded CR-48 Insyde bios that already has been flashed with insydeH20?

Discussion in 'BIOS Mods' started by Dazzaz, Apr 11, 2012.

  1. Dazzaz

    Dazzaz MDL Novice

    May 4, 2010
    12
    0
    0
    I have a CR-48 Chromebook. The stock bios has already been replaced with a CR-48 Insyde bios, but it doesn't have SLIC. Windows 7 has already been installed and running fine. I've downloaded the cr-48 modded bios from this post: /threads/7500-All-Slics-2-1-(Modded-Bios-List)-Note-For-requests-use-Bios-Mod-Requests-section/page667?p=398484&viewfull=1#post398484

    I'm just not sure how to go about flashing, or even which flash software I need for Insyde bios.
     
  2. Dazzaz

    Dazzaz MDL Novice

    May 4, 2010
    12
    0
    0
    Thanks, but each of those threads is regarding flashing from a STOCK Chromebook firmware using the ChromeOS. None of these mention anything about flashing a Chromebook that's already been flashed and has a Windows OS already installed.
    All of these have been done... I'm already running
     
  3. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,045
    180
    You requested a mod that had been done already to be reposted correct? and the original recommendation of the modder was the above correct?
    go to the original request determine the bios of the requester and start from there by putting that bios on your machine. The requester verified the mod was successful. If you are uncertain on how to do it retrace the success of the original requester. If you are confused post back any questions and or results.