I have moded my bios but..

Discussion in 'Windows 7' started by NawtyBoy, Aug 26, 2009.

  1. NawtyBoy

    NawtyBoy MDL Novice

    Aug 13, 2009
    40
    1
    0
  2. Michel

    Michel MDL Expert

    Jul 29, 2009
    1,860
    261
    60
    Hi there :),

    You only need those 3 files x38DS5_SLIC.F7F, autoexec and FLASHSPI. Rename the x38DS5_SLIC.F7F to x38DS5.F7F. This because otherwise the autoexec wont work when you flash from dos. You can flash by dos using a floppy or usb flash drive to do so. Gigabyte also gives you a windows flash tool called @bios.
     
  3. NawtyBoy

    NawtyBoy MDL Novice

    Aug 13, 2009
    40
    1
    0
    Thanks for the info mate...

    But installing/flashing my bios with the slic one...

    I need to install the certificates isnt it?
     
  4. Reign_Of_Freedom

    Reign_Of_Freedom MDL Expert

    Aug 1, 2009
    1,247
    467
    60
  5. Michel

    Michel MDL Expert

    Jul 29, 2009
    1,860
    261
    60
    Yes after the flash you need to do 2 command in cmd

    slmgr.vbs -ilc (license name, sample c:\Dell.xrm-ms)
    slmgr.vbs -ipk (key)
     
  6. ammarman

    ammarman MDL Member

    Jul 17, 2009
    127
    13
    10
    #7 ammarman, Aug 26, 2009
    Last edited: Aug 26, 2009

    I searched for a moded BIOS for my ASUS P5WD2-E Premium and I found it but it was only one file "*******.ROM" im I missing something here ?

    also, if the flashing process failed or the moded BIOS was corrupted, is there any chance to revert my bios back to its original state ?

    1 more question please, does the cert. have to match the bios ? and the serial also ?
     
  7. Reign_Of_Freedom

    Reign_Of_Freedom MDL Expert

    Aug 1, 2009
    1,247
    467
    60
    You can always make a bootable usb stick with your original BIOS.