Overclocking my rig...

Discussion in 'PC Hardware' started by imperatormk, Oct 29, 2010.

  1. imperatormk

    imperatormk MDL Novice

    Oct 29, 2010
    4
    0
    0
    Hey. Here are my computer specifications :rolleyes: :

    CPU: Dual Core E5500 2.8GHz

    RAM: 2x1 GB DDR2 A-Data 667MHz @ 5-5-5-15 -1.8v

    MoBo: ASUS P5KPL-AM /1600

    I can not go past 235 FSB. Anything above that results in no boot. Any suggestions? The DRAM:FSB ratio is 5:3 (and I can`t do any better)...

    Thank`s in advance :)
     
  2. robalm

    robalm MDL Senior Member

    Oct 21, 2009
    330
    47
    10
    Try and set your CPU Ratio lower and run your DRAM Frequency in 1:1 and if you have not, bump up your vcore.
    Its very hard to say what to do, but you can try it.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. imperatormk

    imperatormk MDL Novice

    Oct 29, 2010
    4
    0
    0
    I am sure the RAM is my problem, but I do not have 1:1 divider in my BIOS Options.

    I have 2 options, either buy some 1066MHz RAM, which would let me to reach higher clocks, or beg someone to mod my BIOS and add 1:1 divider. I have opened topic for modding my BIOS, and waiting for reply...After someone mods my BIOS, I`ll try again and post the results.