POWER OFF!! When Plugged IN (even expert couldn't solve it !!) I NEED GENIUS !!!!

Discussion in 'PC Hardware' started by hamdy2013, Aug 17, 2013.

  1. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    Hello.




    We all know that the problem maybe Hardware/Software problem. I tried to solve it in hardware way and software way
    i don't know if there was a 3rd way e.g: Bios (change the degree of high temperature)

    The Hardware

    Laptop : Toshiba satellite L305
    Bios : Insyde V1.50
    System : Windows 7 32 bit
    Processor : 2GB 64 bit



    The Problem:


    - The laptop cuts off power without warning and sometimes the screen color crashes and lag for a while then power off.


    Full Details:

    the laptop was fine till my battery broken down so i changed it with another one but not the original .. then it worked fine then after long time (month).

    1) the laptop started to cut off power and shutdown (Power off) without any warning while i plug in the charger.
    but it was working fine on battery after long time (month)

    2) it started to cut power even if it was working on the battery then.

    3) i tried to change the charger with another Toshiba Charger.

    4) tried to try levono xD charger ( on Toshiba laptop ).

    5) Question: how could i use it again? Answer: on safe mode it works fine on safe mode even if it was plugged in.

    6) tried to read on the internet about the problem people said that it was thermal problem so i opened the lap and cleaned the fan and put NH4 thermal compound.

    7) tried to change the cooling fan and cleaning the heat sink.

    8) tried to format PC and setup new windows 7 & 8 32/64 bits.

    9) I tried to
    disconnect the battery and plug the power cord directly to the laptop (tried to power it on charger without battery)

    10) i tried to remove battery from device manager and installing it again




    Important Information That may help you to find the solution:

    1) it may a processor Or Heat problem why...?

    a) Because i found a program that makes the PC run on the windows normally by stressing the Processor and Ignore the heat it is (Aida 64 Extreme Edition). and that's when the battery power is low that let me log into the windows for 5 mins without problems and open the the program and doing stress on the processor and then plug in the charger if i didn't run the program and make stress on processor the lap will cut power that mean that i can't run windows without this program but i still can open safe mode without it
    The programs screenshot (stressing the processor) and check the heat :
    Untitled.png








    2) It may be Sensor problem ..why?

    When i log into safe mode and open the program to see the temperature i saw this:
    2.png
    Only the HDD Temperature



    3) Bios Settings may help.. how?

    the current BIOS insydeh2o v1.5 rev: 3.0 doesn't support power options only few options about booting
    if we could modify the BIOS or changing the module to Control the high limit for power (increasing it) but i don't know anything about BIOS modifying so i started to search for it i found it here in that forum but i need more information
    about it only i could update the bios from 1.4 to 1.5 i can't use bios tools (beginner) :/


    I would be very pleased if this problem if A GENIUS Solved this problem for me. HE/She will be my hero and the
    GENIUS OF THE FORUM!! :)



     
  2. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,009
    180
    #2 redroad, Aug 17, 2013
    Last edited: Aug 17, 2013
    To request a Bios Mod for your insyde Bios it is done in this format
    -Motherboard Manufacturer and Model :
    -Bios Revision :
    -Bios Type :
    -Bios SLIC :
    -Bios Link :
    -Rw-everything report. How to is found at : http://forums.mydigitallife.net/threads/29789

    and will be posted here and more info here .. If you need a little more info on how to Upload your Rweverything report look here
     
  3. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,009
    180
    Also when posting your request link back to this poat .. When you have limited post count you will not be able to provide links in the normal way .. Simply put hxxp instead of http in the address
     
  4. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    Thank you redroad i will do my request right now :) but how to know slic? :D
     
  5. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,009
    180
    If you are going to be running windows 7 your request will include Slic 2.1 if it is not present .. The RWeveverything report will tell if it is present in your current Bios :)
     
  6. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    #6 hamdy2013, Aug 17, 2013
    Last edited: Aug 17, 2013
    (OP)
    yes,thanks i always use win 7 :) and what is andy's tool?
     
  7. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,009
    180
    Andy is a talented young man :D .. You have 2 choices here either you request a mod following every detail and having a recovery plan in mind before you flash should something go wrong or dive in to your Bios mod education which does have a fairly steep learning curve .. If you are impatient and don't have a plan you most likely will end up with a brick .. So take your time and read
     
  8. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    and that's why i joined the forum to learn and have a plan specially with Satellite L305 :D :wheelchair:
     
  9. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    but i need a help from you to find a way to reset my bios if a failure happened
    i don't know what shall i do use FD file or rename it to BIN?
    is this way possible for Toshiba satellite L305?
    i don't think so :D it is old laptop :wheelchair:
     
  10. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,009
    180
    This mod has already been done here and the mod link is still live :biggrin: I don't see a report back but you can look more closely :D

    initial request
     
  11. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    sorry for asking too many questions :eek: this was the result when i used mr.andy's tool :D Untitled.jpg

    now what? :D
     
  12. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,009
    180
    It looks like you already have slic 2.1 ? What is the original OS of the laptop ?..

    Also found another mod for your bios with verification that is still live
     
  13. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    just downloaded and tested and worked but no change happened :confused:
     
  14. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,009
    180
    The problem you have will not be solved with a bios mod to add slic 2.1 which you may have already (post Rweverything report) if mod was done with the same 1.5 original bios which you currently have .. If that's the case you will have to ask and read further because that will be nothing I have the knowledge to help you with :)
     
  15. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    i don't want SLIC 2.1 :D I want to change the BIOS External settings I just want to add (POWER) to my options not only to get SLIC :D
     
  16. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    I Know that you have knowledge :D and i'm sure that you will help me :director: i will post RWanything right now xD
     
  17. redroad

    redroad MDL Guru

    Dec 2, 2011
    5,326
    6,009
    180
    explain no change :D
     
  18. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    System information

    System Information report written at: 08/17/13 11:36:02
    System Name: HAMDY-PC
    [System Summary]


    ItemValue
    OS NameMicrosoft Windows7® DeepBlue™
    Version6.1.7600 Service Pack 3 Build 7600
    Other OS Description Not Available
    OS ManufacturerMicrosoft Corporation
    System NameHAMDY-PC
    System ManufacturerTOSHIBA
    System ModelSatellite L305
    System TypeX86-based PC
    ProcessorIntel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/DateINSYDE 1.50, 10/07/2008
    SMBIOS Version2.4
    Windows DirectoryC:\Windows
    System DirectoryC:\Windows\system32
    Boot Device\Device\HarddiskVolume2
    LocaleEgypt
    Hardware Abstraction LayerVersion = "6.1.7600.16397"
    User NameHamdy-PC\Hamdy
    Time ZonePacific Daylight Time
    Installed Physical Memory (RAM)2.00 GB
    Total Physical Memory1.99 GB
    Available Physical Memory920 MB
    Total Virtual Memory3.98 GB
    Available Virtual Memory2.70 GB
    Page File Space1.99 GB
    Page FileC:\pagefile.sys
     
  19. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    no change = no thing new happened :D to pc and no extra options in bios (F2 key Options)
     
  20. hamdy2013

    hamdy2013 MDL Novice

    Aug 16, 2013
    21
    2
    0
    RW what is portable meaning ? :confused: