problem after mod hp dv6-3060ee sp55299

Discussion in 'BIOS Mods' started by mak_us1977, Jun 26, 2013.

  1. mak_us1977

    mak_us1977 MDL Novice

    Jun 26, 2013
    3
    1
    0
    hi all
    i have DV6-3060ee
    i flahed my bios with the modified bios to enable advanced options
    after i did bios default,computer dead
    i tried to revive it with windows+B method but it didnt succeed


    i sent it to a computer shop to repair it.
    now it is working again but
    it takes about 35 sec to get first hp logo when i press power button
    it give me error message "ME update failer , try again later"
    then computer boot normally and work only about 30 min then power off


    i think if i fix the ME error it will fixed but how

    also if I run official bios update sp55299 computer freezzzzzzzz


    I make a boot able USB drive and used HPBQ138 and applied correct data ( model, sn, sku, cto, pcid and motherboard code)


    now bios update program start but when i press start it give me error "map region not found"


    any help

    advice please


    best regards
    Mak
     
  2. mak_us1977

    mak_us1977 MDL Novice

    Jun 26, 2013
    3
    1
    0
    i read current bios with flas**t.exe and i think there are many area missing
    all data are FF until adress 280000
    so i think i have to take the chip out and reprogram it with full dump

    i take out the board and found 2 chip i don't know which is the bios

    one beside wifi card "cFeon F40-100HIP" , and the other one closed to chipset and BIOS battery "cFeon F32-100HIP"

    please and advice which one is correct one?

    best regards
    MAK
     
  3. LatinMcG

    LatinMcG Bios Borker

    Feb 27, 2011
    5,356
    1,446
    180
    dump them both and compare to bios with hexeditor
     
  4. mak_us1977

    mak_us1977 MDL Novice

    Jun 26, 2013
    3
    1
    0
    finally i did it and computer now ok
    the bios is the chip near battery