[Solved] Add Strings to Bios which I can read out via dmidecode

Discussion in 'BIOS Mods' started by letesch, Jan 15, 2014.

Thread Status:
Not open for further replies.
  1. letesch

    letesch MDL Novice

    Jan 15, 2014
    2
    0
    0
    Hello there,

    I need to assign (preferably) strings to different Mainboards,
    which I can read out from a Linux environment via dmidecode or any similar tool.
    Integers would do too, but strings would be cooler ;)
    The main point is to identify different Mainboards which are essentially the same Hardware.

    The Mainboard is an AAEON EMB-CV1,
    with an AMI Aptio BIOS.
    R1.6(ECV1AM16)
    Version 2.14.12.19
    (sorry the board won't let me post links,
    just google emb-cv1 for more details/bios downloads)

    The Tool to flash it to the BIOS could also be a DOS Tool.

    I don't know which possibilies I have here,
    but I hope there is someone here who can point me in the right direction

    Thanks for the help,

    letesch
     
  2. letesch

    letesch MDL Novice

    Jan 15, 2014
    2
    0
    0
    #2 letesch, Jan 15, 2014
    Last edited by a moderator: Jan 15, 2014
    (OP)
    Thread can be closed

    Ok, I found it by myself ;)
    In the BIOS Tools Thread on page 42 Post#414.