[SOLVED] D-Lynk Router DI-604

Discussion in 'PC Hardware' started by Tiger-1, Dec 31, 2016.

  1. Tiger-1

    Tiger-1 MDL Guru

    Oct 18, 2014
    3,559
    3,858
    120
    #1 Tiger-1, Dec 31, 2016
    Last edited: Dec 31, 2016
    Hi
    well I have one big problem here that til now I don't solve when I try access configurations for the D-Link model above I need put my username that's ok: Admin but when I need put the password I haven't success (same reseting it) then is not possible make configuration for use on my 4 machines in same time :mad: I already search a lot but don't find nothing useful yet;I hope that someone here help me.
    thanks in advance
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. dhjohns

    dhjohns MDL Guru

    Sep 5, 2013
    3,276
    1,731
    120
    Leave password blank if you have reset to default.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. sml156

    sml156 MDL Member

    Sep 8, 2009
    130
    70
    10
    Wouldn't surprise me if the router is dead it's pretty old router.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. LatinMcG

    LatinMcG Bios Borker

    Feb 27, 2011
    5,418
    1,483
    180
    #4 LatinMcG, Dec 31, 2016
    Last edited: Dec 31, 2016
    unplug internet port and all pc's but only 1
    reset router button 30 secs then pull power out 10 secs and put it back in.
    if your modem and router are on same net (DHCP) like 192.169.0.x it would be conflicting.
    so try changing the router ip from 192.168.0.1 to 192.168.10.1

    reboot modem and then plug in cable to router.

    make sure you set pwd on router.. new malwares changing DNS in routers if default pwd.
     
  5. Serpius

    Serpius MDL Novice

    Dec 31, 2016
    7
    2
    0
    You must reset the router. That is the only way you can put in a new ID and password.

    Go to D-Link website, then go to the Support section.
    Look for the support for your specific router and model.
    Then, read the manual that comes with the router and look for information that tells you how to reset the router.
    Once you are done, then log into the router then you can setup a new ID and password.
    Please write that information down and put that paper somewhere safe or you can take a picture of that and put it on your cell phone.

    Good luck! ;)
     
  6. Tiger-1

    Tiger-1 MDL Guru

    Oct 18, 2014
    3,559
    3,858
    120
    @sml156 well dude I don't care if my router is older or no I want only that works on Windows O.S. and Linux too :sneaky:
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. leebo_28

    leebo_28 MDL Senior Member

    Jun 12, 2011
    460
    170
    10
    either leave blank or enter "password" ..no quotes
     
  8. MS_User

    MS_User MDL Guru

    Nov 30, 2014
    2,730
    435
    90
    ok first if u reset the router to be re-configured... u most connect your comp via cable to the router

    then enter this static IP address in your TCP IP settings

    192.168.1.5
    192.168.1.1 default gateway
    192.168.1.1 DNS


    Factory Default Settings for the D-LINK DI-604 router router
    Username: admin
    Password:

    once router configure go back to your comp TCP IP setting and change it back to dynamic
     
  9. Tiger-1

    Tiger-1 MDL Guru

    Oct 18, 2014
    3,559
    3,858
    120
    Hi
    well first thanks @all here for the help; I try several times reset router and never is changed so I open the box see all into it in sequence turn off, unplug all cables and reboot my system and go to take one coffee when system is on I open Firefox put 192.168.0.1 User as Admin and NO passwords click ok then surprise!! one new page(main) is open in sequence on item WAN I make the correct settings always on internet etc apply changes and the router reboot alone in sequence In open one new tab on Firefox directed imediately to MDL so I'm very happy now :)
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...