Warning to SSD users running 10240

so if trim is disable win 10 does not detect the SSD?

 

Thanks, but maybe this is only you?

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

As OP stated, Zero means it's enabled so it's all good.

 

No such problem here.

 

Must be for old hardware, so please, don't use a sensation word like "Warning", you might scare some people.

 

trim was enabled for me by default.

 

Mine is Zero enabled by default

 

Windows 7 and onward has had TRIM enabled by default, so there’s nothing special you need to do if your PC

 

If you have a Samsung SSD you should install Samsung Magician Software. Run OS Optimization, I have mine set at Maximum Performance. It creates a special Power Config Profile that enables and disables certain things for optimal SSD performance. I swear I boot to my desktop in eight seconds flat.

 

Mine is on Raid 0 and specially made for the system. It boots between 4 to 6 sec.

 

0 here as well by default.

If you are running 2 SSD in Raid, that would explain it however. as an example of one possibility

 

even without trim windows will not have a issue with the SSD ocz users have there own form of trim built into the SSD anyway and samsung users have Firmware updates to worry about that might brick there ssd. in the end this isnt a issue mine was enabled by default

 

Mine takes a second or two more, I have two non raid SSD's-Primary has Win 10-The other one for OS Experimenting, Four HHD's-The four are for HTPC and Gaming.

 

Almost the same here, but without any optimization or SMS.

 

3 computers with ssd and all have trim enabled by default.

 

OP, this seems like it is specific to your situation, I got:
DisableDeleteNotify = 0

On my laptop that has been running 10 from the original insider preview.