Hello, I am not very computer savy guy so please be nice to me anyway i get an error unsupported partition table 4 I tried almost every verion of Loader i could found and no luck and i tried WAT Fix but no luck either if i tried to change the drive location again in computer mange the hard drive disk 0 show up as different drive then C drive. so switching the drive wont work and as far bio it is set to default and my second issue is that i am using windows 7 ultimate 64bit as server so i dont have graphic card so i have to remote into the pc to do any work. i am using SSD Drive a 128 GB. see i am not good with bios so " select "legacy boot" to boot without UEFI so that Windows is installed as NTFS with an MBR. " not sure how to do that as SSD wont show up if ACHI is not selected + in Bios there is option to use windows manger in bios by defult or UEFI so i am confused more about it this is a 3 OS re-install in 3 days as my system cruhed before everything was working fine logs: ----------------------------------------- Code: Windows Validation Data--> Validation Code: 0 Cached Online Validation Code: N/A, hr = 0xc004f012 Windows Product Key: *****-*****-TMVMJ-BBMRX-3MBMV Windows Product Key Hash: 55n8g6xdzhe4AOWhmTzdzQoLfa4= Windows Product ID: 00426-292-0000007-85611 Windows Product ID Type: 5 Windows License Type: Retail Windows OS version: 6.1.7601.2.00010100.1.0.001 ID: {9CE3A3B4-A82A-4E51-809C-147618836EAE}(1) Is Admin: Yes TestCab: 0x0 LegitcheckControl ActiveX: N/A, hr = 0x80070002 Signed By: N/A, hr = 0x80070002 Product Name: Windows 7 Ultimate Architecture: 0x00000009 Build lab: 7601.win7sp1_gdr.130318-1533 TTS Error: Validation Diagnostic: Resolution Status: N/A Vista WgaER Data--> ThreatID(s): N/A, hr = 0x80070002 Version: N/A, hr = 0x80070002 Windows XP Notifications Data--> Cached Result: N/A, hr = 0x80070002 File Exists: No Version: N/A, hr = 0x80070002 WgaTray.exe Signed By: N/A, hr = 0x80070002 WgaLogon.dll Signed By: N/A, hr = 0x80070002 OGA Notifications Data--> Cached Result: N/A, hr = 0x80070002 Version: N/A, hr = 0x80070002 OGAExec.exe Signed By: N/A, hr = 0x80070002 OGAAddin.dll Signed By: N/A, hr = 0x80070002 OGA Data--> Office Status: 109 N/A OGA Version: N/A, 0x80070002 Signed By: N/A, hr = 0x80070002 Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3 Browser Data--> Proxy settings: N/A User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32) Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe Download signed ActiveX controls: Prompt Download unsigned ActiveX controls: Disabled Run ActiveX controls and plug-ins: Allowed Initialize and script ActiveX controls not marked as safe: Disabled Allow scripting of Internet Explorer Webbrowser control: Disabled Active scripting: Allowed Script ActiveX controls marked as safe for scripting: Allowed File Scan Data--> File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003] File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003] File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003] File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003] Other data--> Office Details: <GenuineResults><MachineData><UGUID>{9CE3A3B4-A82A-4E51-809C-147618836EAE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-3MBMV</PKey><PID>00426-292-0000007-85611</PID><PIDType>5</PIDType><SID>S-1-5-21-1947670120-3551912075-3315670042</SID><SYSTEM><Manufacturer>To be filled by O.E.M.</Manufacturer><Model>To be filled by O.E.M.</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>0902</Version><SMBIOSVersion major="2" minor="7"/><Date>20111207000000.000000+000</Date></BIOS><HWID>E7710100018400FA</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> Spsys.log Content: 0x80070002 Licensing Data--> Software licensing service version: 6.1.7601.17514 Name: Windows(R) 7, Ultimate edition Description: Windows Operating System - Windows(R) 7, RETAIL channel Activation ID: ac96e1a8-6cc4-4310-a4ff-332ce77fb5b8 Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f Extended PID: 00426-00170-292-000000-00-1033-7601.0000-2042013 Installation ID: 012730710050149453986521627831941191812961482461669043 Partial Product Key: 3MBMV License Status: Initial grace period Time remaining: 42540 minute(s) (29 day(s)) Remaining Windows rearm count: 3 Trusted time: 7/24/2013 2:12:38 AM Windows Activation Technologies--> HrOffline: 0x00000000 HrOnline: N/A HealthStatus: 0x0000000000000000 Event Time Stamp: N/A ActiveX: Not Registered - 0x80040154 Admin Service: Not Registered - 0x80040154 HealthStatus Bitmask Output: HWID Data--> HWID Hash Current: MAAAAAAABAABAAAAAgABAAAAAQABAAEAHKIMuFT5RlJ4GayL6iQujP6svOIm0o4u OEM Activation 1.0 Data--> N/A OEM Activation 2.0 Data--> BIOS valid for OA 2.0: yes, but no SLIC table Windows marker version: N/A OEMID and OEMTableID Consistent: N/A BIOS Information: ACPI Table Name OEMID Value OEMTableID Value APIC ALASKA A M I FACP ALASKA A M I HPET ALASKA A M I MCFG ALASKA A M I SSDT AMD POWERNOW Activate issue the motherboard i am using is: ASUS M5A97 Evo - AM3+ - 970 - SATA 6Gbps and USB 3.0 - ATX AMD ATX DDR3 2133 Motherboards Not very good as far understanding what to do ACHI is enabled and asus bios is confusing so i keep it as defult as it came Please advise Thanks
If you are familiar with bios flashing, then I can guide you to permanently mod your bios so that you don't need any loader (in future).
Hello not extreamly good with bios flashing or upgrading bios i done it few times with some pc motherboards but that was long time ago so i am worried i can mess up here also because i dont have graphic card it will be little hard as i will need to take graphic card out of my other pc and put it back on server pc and remove all 10 drive is there is any for loader Thanks in advance
Hello did not work as advance option is not available and in older v of loader advance tab show up but disable option did not work as i get error
Hi thanks for your reply but i think you miss read my post i already said i tired so many loader pls see screen shot tito is helping me with my issue Thanks
Aha!! Got it So your installation isn't MBR, its UEFI. You have 3 choices: Format again & install as MBR. Format or up/downgrade to Enterprise/Professional & use KMS method. Install a modded bios.
Hello It seems my issue is not going be solved easily i see .. i used same CD with this pc before not sure what change now to make loader act like this this was my 3rd os install in 2 days since i am using SSD 128 GB This is intersting because as i said with SSD and CD install it worked fine i am not sure what went wrong this time very strange do you guys have a documents on how to install Format again & install as MBR. or on Install a modded bios it will take me some time to get a second Graphic card as this pc does not have a grapic card i have to take it out from my 2nd pc again and again Thanks in advance
If you had explained that you use UEFI Scheme and that screenshot before I posted, I may had answered different if answered at all! A lot confusion would be there if all info's would be posted upfront. And I only pointed to Tito's post, which were totally correct at that time!
So with my Motherboard how can i install as MBR it seems the easiest way to fix my issue is OS Reinstall but as MBR which i am not sure how to do that and the hard drive is SSD Thanks
In UEFI set boot option to 'Legacy Mode' and enable CSM (emulates old BIOS), then System will setup MBR partition layout during install.
hello guys 1- not able to disable UEFI " disable uefi bios asus " 2- i see only optin to boot with windows manager and that was selected last time when i did 3 different os re-install 3- Bios screen keep going black so the monitor lose graphic connection after i am in bios , if i restart the pc i get signal but as soon i go to advance mode no signal on the mointor anyway if Boot with windows manger is correct Bios setting then i wonder why i am getting partinon table issue ?? again it is in SSD Drive Not sure what to do Thanks
Hi did not see it " Option ROM Messages' [FORCE BIOS] is set as default. " so i went with Windows 7 enterprise hoping this table issue wont come in however when i disabled UEFI Windows boot manager the pc would not see Hard drive even when hard drive was selected Now this time i paid some extra attion to boot from bios my option where Boot from HD Boot from DVD Room Boot from DVD Room with UEFI i slected Boot from DVD Room 2nd choice so i am hoping once OS get installed i wont run into incorrect tables and hope this will install OS as NTFS or AMBR Thanks