All SLICs 2.x (Modded Bios List) - Note: For requests use 'Bios Mod Requests' section

Discussion in 'BIOS Mods' started by Yen, Jul 29, 2009.

Thread Status:
Not open for further replies.
  1. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  2. MXBlazer

    MXBlazer MDL Novice

    May 27, 2010
    4
    0
    0
    hi the screenshot is on megaupload link, thanks for your help but slic status is red invalidated

    xxx.megaupload.com/?d=KIQXEOFX
     
  3. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
    How did you Flash it ????
    The RSDT in the Mod looks good.
     
  4. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  5. prestoblade

    prestoblade MDL Novice

    Feb 27, 2009
    9
    0
    0


    Ok, big problems. After activating windows the other day I have not had a chance to mess with it till now. I installed the Drivers for the graphics card and restarted and all I get is BSOD. Bios are not accessible ( when I try to load bios setup page all I get is a frozen mouse pointer and "AB" in the bottom right corner of the screen). I am currently trying to get the pc to boot from something other than the hdd but so far I have not been successful. Any ideas?

    ----
    edit:
    Without the graphics drivers installed it is booting into windows. I tried to reflash bios to original bios using afuwin, it flashed the bios but the pc is still freezing the same way when I try to enter the bios. I also pulled the bios battery to reset the bios ( when it came back up it said bios defaults had been loaded but still freezes when i try to enter bios setup). I am not sure if pulling bios battery completely loaded defualts, because when I press f11 to choose boot device the correct date and time appears in bottom right corner.
    What afudos command can I use to completly flash every part of the bios chip?

    ----
    edit #2:
    I was able to boot from a flash drive and run the AsRock "AMI Firmware Update Utility(APTIO) v2.34" this is an executable with bios embeded, it said that it erased, wrote, and verified the following: flash, nvram, and bootblock. Bios setup still freezes when I press delete or f2 to enter setup. The "AB" in the bottom left corner might be a checkpoint of the current stage of the bios load (just a guess).
     
  6. prestoblade

    prestoblade MDL Novice

    Feb 27, 2009
    9
    0
    0
    Thanks for the reply, this is the "H67M-ITX" (no mini pci wifi). I just tried to update to the previous version of the bios (v1.0). The only change was that after restarting the computer the intel sata raid firmware showed that it was updating as well. Still freezing when opening the bios setup page.

    ----
    I just sent in an RMA for this board. So if you have anything you want me to try before I send it back let me know. This is probably just a bad mainboard and has nothing to do with the modded bios; however, if it is a problem with the modded bios I think it would be good to try and fix this board that we dont have to worry about messing up (any further) so that the next guy that gets one can benefit. I purchased the GA-H67N-USB3-B3 instead. So prepare yourself for helping me with that one! ;)
     
  7. Hawke

    Hawke MDL Novice

    Apr 1, 2008
    6
    0
    0
    I had some problems with this, not sure if it was caused by the bios though, im on unmodded and the problem is currently gone, but i also tried a few other things which may have fixed it. i dont want to mess and break it again.

    the issue was a very very slow post with a USB drive plugged in, my board was hanging on code 90, check for usb input for about 2 mins or so on every boot. anyone else get this issue?
     
  8. prestoblade

    prestoblade MDL Novice

    Feb 27, 2009
    9
    0
    0
    Thanks Serg008! :)
     
  9. karthik21

    karthik21 MDL Novice

    Mar 30, 2011
    6
    0
    0
    Cant download

    Sorry, If this is wrong area to post. I'm a newbie to this site. I cant download anything in this site. Please someone help. I need the files urgently.

    error:
    Network Access Message: Access Restricted
    Explanation: You are trying to access a restricted file on this server.

    Note the following:

    * Clearance: This server will only accept inbound connections from All other requests will result in this message.
    * Source: Verify the Denied Source under Technical Information. If this reads none then you are attempting to access this file directly, access is restricted to the links posted on MDL.
    * Client: Ensure that you are using a web browser to access this file, and that you are clicking on a link present in an MDL post. If your browser is opening a new tab, or attempting a direct connection then the MDL referreral string is not passed to the server, resulting in this message.

    If you are still not able to access the requested file, inform the user who posted the link and you will be provided with another. When informing the user paste the following information from below.

    Technical Information (logged for support personnel)

    * Server Error Code: 404
    * IP Address: 220.227.139.177
    * Request: /Tools/SLIC_SLP2.1/certs.rar
    * Denied Source:
    * Browser Used: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.7) Gecko/20100723 Epic/1.1 Firefox/3.6.7
     
  10. bandolier.wz

    bandolier.wz MDL BIOS/EFI Modifier

    Nov 4, 2007
    974
    316
    30
  11. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  12. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  13. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
    #6740 NoJuan999, Mar 31, 2011
    Last edited by a moderator: May 23, 2017