Manufacturer: Asus Model: P6T Deluxe V2 Version: 606 Bios Type: AMI Bios SLP: Dell.bin SLIC: Dell.txt Link: Modder: Theliel Tester: Theliel Method: SSV3
Manufacturer: TOSHIBA Model: EQUIUM M50 244 Version: 5.00 Bios Type: Phoenix BIOS SLP: TOSHIBA SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN Link: Modder: Busykid508 Tester: ossian Method: Winflash Bios Update Tool Included - However I strongly suggest to use PHLASH17 (PH161700) on bootable USB Flash Drive - Rename AZ00500A_SLIC.ROM to AZ00500A.ROM and at command prompt in DOS, type: ph161700 AZ00500A.ROM /x /s /force <ENTER> Tested and working.
GA-P45-DS4 - Working Mod Manufacturer: Gigabyte Model: GA-P45-DS4 Version: 1.0 Bios Type: Award Bios Version F9 SLP: Dell SLIC: Dell Link: Modder: Gibbo Tester: Gibbo Method: SSV3 Enjoy, its working on mine
Originally Posted by zort For naseap: -Motherboard : Abit IC7-G -Bios Revision : 28 -Bios Type : Award HP SLP/SLIC2.1: Method: Award Tool, 0+2, removed first microcode update Flashed bios but when rebooted the bios post hangs after detecting the cpu. Next line starts with memory frequency and stops. It shows cpu speed at 1.4 when I have a 2.8. I am waiting for a new bios chip. I tried cmos jumper, removed battery, removed ram except 1 stick and nothing works. Another member here tried the same bios and had the same results. Warning, do not try flashing your bios with this mod because it will brick your MB. This has been confirmed by 3 different setups. That is why they call it testing. Good thing the chips are socketed. This was not my pc and I will never try this on any pc but my own. Sucks bricking a MB when it is not your own.
It's SLIC 2.0, not 2.1. I d/l and flashed it 3 times. One from windows and twice from DOS. It's useless.