All SLICs 2.x (Modded Bios List) - Note: For requests use 'Bios Mod Requests' section

Hi Guys, I know this is a very late reply to this post and I am not the original requestor but found this hear after searching (don't want to bother anyone unneccessarily) and I am pleased to confirm:

SUCCESS!

Thanks and Best Wishes,

b7

 

confirmed working 06-23-2012

 

You need to login to view this posts content.

 

Can someone please re-upload R69AM828 Slic 2.1 Moded BIOS for Biostar TA690G AM2?

Thanks!

 

You need to login to view this posts content.

 

Sure, no problem. I will do it over the weekend.
Thank you for Bios re-upload.

 

Flash was successful. It works.

 

They no longer have v1.50 or v1.60 on their site; however, they do have v1.70. Can you mod it? Thanks!

 

You need to login to view this posts content.

 

rghost links state the files are deleted .. is it possible to repost them (or just e75783 modded), serg008/anyone with a copy?? ... plz

 

I wished to flash it to ACER so that I need not reinstall win 7 with Asus key.
I have encountered many problems on modding:
1. BIOS is write-protected. I later used official AFUDOS to save the system BIOS image, say 1_70.ROM. This part is partially done.
2. Although the BIOS is AMI, I struggled to find out the correct mod tool is PheonixTool. I used PheonixTool 2.05. It says SLIC not complete (I used SLIC Toolkit v3.2) and can't read report of RW Everything 1.5.2. I went forward and generated a new BIOS, say NEW.ROM.
3. Then, I struggled to flash NEW.ROM to PC. Using instant flash, NEW.ROM is not detected. I discovered no option to flash using asfudos.
Help

---

Update A:
I installed RW Everything 1.5.2 on PC and it worked. PheonixTool 2.05 read the RW report successfully.
Whether I used the SLIC Toolkit v3.2 to generate the SLIC 2.1 table or download one in this forum, the warning "no complete SLIC table found" keeps on.
Is this normal?
I dare not flash my MB with the new ROM generated.
Help

---

Update B:
I have discovered that "module" method runs without warning prompt. Some threads show that module method may work. A new bios ROM is generated using PhoenixTool 2.05.
But Asrock instant flash can't detect the BIOS file, not even the one abstracted by afudos! In afudos, I can't find any flash option.

---

Update C:
Worked out a modded BIOS with the following procedures:
1. Download BIOS v1.7 from manufacturer's site.
2. Use PhoenixTool 2.05 to work on the BIOS file.
3. Select "ASRock" as manufacturer.
4. Loaded the files generated by SLIC Toolkit v3.2. Intention was to flash to Acer OEM.
5. Loaded the RW report generated by RW Everything 1.5.2.
6. Select "Dynamic" method.
7. Ignore the warning "no complete SLIC table found".
8. Generated a new BIOS
Files links are as follows:
View attachment 15723

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

You need to login to view this posts content.