All SLICs 2.x (Modded Bios List) - Note: For requests use 'Bios Mod Requests' section

Discussion in 'BIOS Mods' started by Yen, Jul 29, 2009.

Thread Status:
Not open for further replies.
  1. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
    #1941 NoJuan999, Nov 12, 2009
    Last edited by a moderator: May 23, 2017
  2. hclarkjr

    hclarkjr MDL Member

    Nov 18, 2007
    148
    44
    10
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  4. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  5. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  6. aresonic

    aresonic MDL Novice

    Nov 9, 2009
    7
    0
    0
    #1948 aresonic, Nov 13, 2009
    Last edited by a moderator: May 23, 2017
  7. aresonic

    aresonic MDL Novice

    Nov 9, 2009
    7
    0
    0
    I used the DDR3 memory,so I am sure my motherboard is P35 Platinum Combo
    :)
     
  8. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
    Did you try the v1.1 BIOS for that board.
    I had one person use the v1.2 sucessfully and one that said it failed for him, but the v1.1 seems to work for most people on that board.
     
  9. Andrew2

    Andrew2 MDL Novice

    Nov 8, 2009
    14
    16
    0
    First of all - thank you very much.

    Will post results ASAP!
     
  10. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  11. latics4ever

    latics4ever MDL Novice

    Nov 8, 2009
    4
    0
    0
    I hope you don't mind me asking but can i flash using winflash.

    Thanks
     
  12. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
    I don't mind at all. :)
    It Is NOT recommended to use Winflash as it is MUCH more Risky that using the Flash Utility from your Board manufacturer for DOS.
    If you don't have a Falsh Utility from he Manufacturer,
    I would try AFUDOS 2.x (from ASUS) or AFUDOS 4.x. (From AMI).

    I just looked and Your BIOS came with winflash so it might work fine but make sure you have a Recovery Disk ready if you try that utility.
     
  13. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
  14. Scroll3D

    Scroll3D MDL Novice

    Oct 31, 2009
    4
    0
    0
    Flashing MB P5KPL-AM

    Hello

    I have 2 questions:

    1. When I try to update my MB bios with Asus Windows utility (ASUSupdate), it never proposes me the v.0518, but only the v.0516 (while when I go on Asus download center, I see this v.0518.
    So, how to be sure if that version fits my MB P5KPL-AM?

    2. Can I use ASUSupdate (under Windows XP, as I didn't install yet 7) with your mod file?

    Thanks

    [Edit] I believe that according to your post #1977 question 2 is already answered !!!
     
  15. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
    1. Open you PC and look at the MB then check the Model with the one on the ASUS Site.
    If they match you will be fine.
    BUT,
    Why Not just use a modified version of the 0516 BIOS ????

    2. I have absolutely NO Experience with Live Update.
    If it flashes from within Windows I would NOT Use it !!!!!!!!!!
    I would HIGHLY recommend you flash from DOS with the AFUDOS v2.36 that matches your board from the ASUS Site.
     
  16. Scroll3D

    Scroll3D MDL Novice

    Oct 31, 2009
    4
    0
    0
    OK.
    I was asking about the v.0518 you have proposed because it's with SLP, ... Asus, while the v.0516 files I found are identified as Dell (even if technically it doesn't really matter, my computer is not a Dell).
    Thanks again.
     
  17. Grizz

    Grizz MDL Novice

    Aug 9, 2009
    41
    8
    0
    #1959 Grizz, Nov 14, 2009
    Last edited by a moderator: May 23, 2017
  18. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
    #1960 NoJuan999, Nov 14, 2009
    Last edited by a moderator: May 23, 2017