Anyone can send me a mod bios for Maximus formula with: Original bios from ASUS 1403 Intel matrix rom 8.9.0.1002 or the last for ICH9R Last rom for Marvell gigabit lan Last rom for Jmicron controller SLIC 2.1 ASUS for Windows 7 Thanks
I think I tried pretty much all of the Intel Matrix Storage option ROMS in this thread, and none of them worked for my Asus G50vt laptop. The system boots but if RAID is enabled and its bios is loaded, I get the message "Incompatible hardware". I believe this is because laptops use ICH9-M instead of ICH9-R for the PM45(as opposed to P45) chipset. The reason I am trying to update this option ROM is because when RAID is enabled and the drives are setup in a stripe set array, I get pauses and random moments of freezing in Vista64. Startup and shutdown increase a couple minutes each, excluding the controller bios load. The drives both work fine individually in SATA mode. Maybe updated RAID firmware would fix this? The problem is finding a bios with a similar but updated option ROM. Ive tried bios files from a variety of makers, some of them I couldn't access properly, and the ones I was able to access showed a very strange option ROM for the controller. Had 'development copy' written over a buncha times with not for release also mentioned, this was viewed with a hex editor. So wtf? Ive heard asus doesnt hasnt included the updated option ROM in their bios, how am I supposed to get this s**t working properly?
this issue is weird... might not be option roms fault but something else... however what i have no idea... my advice would be, try those 2 disks on some desktop computer where you can update and try some other two disks on your laptop. If you can ofc.
Intel Rapid Storage Technology Option ROM v9.6.0.1014 does not function properly with an abit IP35 Pro using beta 18 BIOS. AHCI Option ROM screen spits out the "incompatible HW" error when attempting to run the controller in RAID mode. Does this really matter when running in AHCI, however?
well if you know that something is wrong in raid mode, even if everything seems to work in ahci mode i wouldnt use it.
Sorry for outing me as a NOOB: But is there something like a step by step how-to for exchanging the rom? Or did I overread it? I am asking out of curiosity. I have a P5Q and I am interested if updating the roms would improve my board too. Could someone maybe help me out? Thanks in advance
P5Q uses AMI Bios, so you need to get AMI Bios Tools (thread in this forum) Short advise: Load Bios, select Replace, select module to replace, choose file with newer module, press button replace and save. On the other side, all necessary infos are in this thread, read it. Maybe RAID 9.6 won't work with P5Q (9.5 didn't) latest working was 8.9.1. Give it a try.
I was thinking the same. Does anybody know whether anything newer than 8.5.0.1030 works on an IP35 Pro?
In MMTools you can see Device ID of Module in "RunLoc". For Intel Raid there should be "8086:2822" like in modulename in ".NEW_B10CK5_20100312\Intel_RAID_for_SATA" It's an PCI Option Rom.
ICH9MR = ICH9M too??? Anyone try these on laptops? I couldn't get most of them to work on my Asus G50 on Pm45 chipset, nothing over v8.0.0 and thats what is in bios.
Option ROM v9.6.0.1014 works perfectly on my p5k-e/wifi-ap mobo, try ide/raid/ahci all ok i have inserted also the new jmb363 1.08.01 rom extracted by myself from new p6t bios, i don't know if it work because i don't have any hd connected to it only two ide cd-rom and works correctly
hm? p6t? i had that version of jmb from few months ago but it didnt work on my mobo... however it was not extracted from p6t bios, but from some mobo with p55 chipset. I checked latest p6t bios i could find (1303) and it doesnt have jmb 1.08.01 but some 1.06.xx, so can you post link to this bios?