1. Make bootable floppy (or USB flash drive). 2. Delete any autoexec.bat & config.sys from it. 3. Copy awdflash.exe and BIOS *.bin file on it. 4. Restart and enter to BIOS. 5. Load BIOS defaults (Note or remember old settings if need). Set the floppy or USBFlash as default boot device. 6. Save settings&Exit. 6. Immediately boot from floppy/USBFlash. 7. Enter in command line: awdflash.exe YourBiosFile.bin 8. Answer flasher questions (for backup if need and programming). 9. Remove floppy/USBFlash and press F1 to reboot. 10. Immediately enter to BIOS again.* 11. Load bios defaults. 12. Make preferred (old) BIOS settings. 13. Save BIOS settings&Exit. 14. Enjoy. *If your system hanged up on step 10, clear the CMOS settings by jumper on mobo. Using EZFlash and Windows utility highly NOT recommended to avoid any errors and mobo damage.