Are you sure? Have you flashed the modded bios using the Mod.bat file? Please post a screenshot of SLIC toolkit, Advanced Tab.
Good morning! I'm back now and upgraded to the 1.70 Bios. 1. Problem: After burning the new BIOS 890FX DeLuxe4 1.70 SLIC 2.1 I got an BSOD while loading Windows before the Log On Screen appeared Started in Safe Mode were working, rebooted to normal Started again in normal Mode: BOSD Open the Bios and set the Memory Clock from 1600 to 1333: Windows started Note: my memory are Corsair Vengeance DDR3 16 GB (4 x 4GB, 2 Set 8GB Dual Channel) CMZ8GX3M2A1600C9 2. Problem: After about 20min the BOSD again! started in Safe Mode: worked open the BIOS Setup and set the Memory Clock back to 1600 started in Safe Mode: BOSD after app. 5min! open the Bios and set to back to 1333 started in Safe Mode: worked started in Normal Mode: working since 1.5h now Note: Any Memory Clock settings below 1333 will NOT work. Question: is there any easy way to get the Memory working on it's initial full speed of 1600? After upgrading the CD-Key changed from Asus Key to something else, Windows is still activated, so no problems with that. I didn't find an ASRock Cert and Key, so it maybe not exist. Beside to the Memory problems, which could be huge for my work with huge Excel Worksheet of more than 500 MB per sheet, the Bios seems to be Ok. The Version 1.50 had slightly problems with the x6 CPU but the x4 CPU. Any idea? Thanks for any answer.
Yah... as long as the version supports oem:slp activation; otherwise the SLIC mod isn't fruitful at all
I couldn't use winflash it says the file is older than present bios where shold i use the command winflas /NODATE can u give me step by step procedur there r 3 files in that attachement 1. original bios file 2. SLIC file 3.ASUS21 file which one i should flash
Create a new text file named flash.txt, write inside winflash /NODATE, save, rename it to flash.bat, run flash.bat file