Try Flashing like this: Alternate Instructions: Type: awdflash xxx.bin /cc/cd/cp/py/R The “xxx” should be replaced with the filename of the BIOS bin file. /cc = clear CMOS after Programming /cd = clear DMI after Programming /cp = clear PNP(ESCD) after Programming /py = Program Flash Memory /R = Reset System after Programming
Hi thanx for the advice however its still not working i the detecting array only show up when i want to enter the bios (for setting time and other stuff) I think the Bios setting is set somehow to a raid-setup function enabled so it now tries to find/detect an array of harddrives I can remember with my former slic that i had to do a very special flash first the original unmodded one one the regular way and then the slicbios with special instructions but i tottaly cannot remember wich settings were apllied i hope you or someone else knows how to deal with this problem thanx in advance again
You need to search wherever you had the last mod done and see if the flash instructions are still listed somewhere. I don't have A DFI board so I have NO clue what your specific MB requires to flash properly.
Succes NF4LD406.BIN SLIC2.1 HHUUUUUUURRRRRRAAAAAAYYYYYY Succes Finally U guys Are my LIFE-Svaers!!!! thank you very very much and im now very proud to say that the mod works greetz and thanx to all who helpd