Dead PackardBell MB65 by wrong Bios-mod (any help would be appreciated)

Discussion in 'BIOS Mods' started by jhonny100, Feb 12, 2013.

  1. jhonny100

    jhonny100 MDL Novice

    Feb 12, 2013
    2
    0
    0
    #1 jhonny100, Feb 12, 2013
    Hi: I made the stupidity of flashing the bios of my notebook packard bell MB65 using a wrong bios (just by mistake).
    The bios was: PB2A4A04.bin and the commands used were: "PH161700.EXE PB2A4A04.BIN / O / Force / X / C / S"
    Now my notebook is dead, with only three beeps sound and does not show anything on the screen.
    The original bios of my computer is very similar: "PB24A04.BIN".
    I tried the recovery methods mentioned in this site, using a usb stick with crisdisk and all possible keys combinations but still with no luck. I would really appreciate çany help that you can give me with this problem.

    TIA


    PS: excuse my english
     
  2. Recursion

    Recursion MDL Junior Member

    Dec 26, 2012
    75
    4
    0
    #2 Recursion, Feb 12, 2013
    Last edited: Feb 12, 2013
    you can use an eeprom programer and solder the flash chip from the mainboard.
     
  3. jhonny100

    jhonny100 MDL Novice

    Feb 12, 2013
    2
    0
    0
    #3 jhonny100, Feb 13, 2013 (OP)
    Thanks for the answer, but yesterday i recover my notebook with a boot cd and forced bios flashing, now is working again. :)
     
  4. LatinMcG

    LatinMcG Bios Borker

    Feb 27, 2011
    5,709
    1,603
    180
    #4 LatinMcG, Feb 13, 2013
    a boot cd ? wow must be a magic boot cd.

    maybe the bios recovery cd wincris method.
    i think even if u flash wrong version.. most of times the bios part ID stays same as that section is not flashed so bootblock is able to recover. :worthy: