[DISCUSSION] Windows 10 Enterprise (N) LTSC 2019

Discussion in 'Windows 10' started by Tito, Feb 1, 2018.

  1. AndyMutz

    AndyMutz MDL Senior Member

    Jun 30, 2011
    250
    507
    10
    no, you don't.
    there is the nvidia standard driver, which comes with the control panel included.
    and even the DCH driver doesn't need the store, the control panel gets downloaded by windows in the background, even on LTSC.

    -andy-
     
  2. Super Spartan

    Super Spartan MDL Expert

    May 30, 2014
    1,430
    759
    60
    #5402 Super Spartan, Jun 18, 2020
    Last edited: Jun 19, 2020
    Not the DCH drivers. You'll have to download the standard driver. BUT, Dell only provides DCH drivers which in my experience are the best for performance so one would still need the store.

    Here's a tip for anyone with an nVIIDA Graphics card.

    Right click on your desktop then choose nVIDIA Control Panel. Go to Manage 3D Settings from the left pane, then scroll down a bit until you see power management. If you see it's set to OPTIMAL which is the default setting when you install a driver. That's your issue.

    Optimal Power means when there is no draw on the screen, the GPU clock speeds is set 0 MHz to save power and then ramps up once it needs to. Sounds great on paper, works like crap. This is the number one reason why anyone might experience crappy performance from their nVIDIA GPU. What's worse, is that's the default setting in the nVIDIA Control Panel after you install a new driver often leading people to blame the driver for bad performance when it's just the fault of nVIDIA's clowns.

    Set the power management to Adaptive which puts the GPU at lower clock speeds when no GPU intensive apps are in use and it would ramp the clocks up when needed. That actually works. It's the best balance between getting lower heat from the GPU and good performance in games.

    When benchmarking, for the optimal results, it's best to set the power management to High Performance.

    Mind you, after you change the power management to whatever you set it to, a reboot is mandatory for the new clock speeds to take effect.

    Classical nVIDIA Swiss Cheese
     
  3. kgtuning

    kgtuning MDL Member

    Aug 26, 2015
    118
    72
    10
    ahh i see. Thanks
     
  4. Kyle Edwards

    Kyle Edwards MDL Novice

    Jun 14, 2020
    10
    0
    0
    I have some questions about the creation of an LTSC 2019 ISO

    1 - I need a consumer ISO right ? I can use the 1809 June 2020 updated one ?
    2 - I will need a consumer .SFX of my language and use on SVFX to convert the original consumer ISO to an consumer ISO of my language then take another SFX to convert the ISO of my language to an LTSC of my language right ?
    3 - How I activate the Windows on that ISO so I don't need to do that later ?
     
  5. Enthousiast

    Enthousiast MDL Tester

    Oct 30, 2009
    29,094
    44,664
    390
    For the svf files by @GezoeSloog it's:

    en-US Consumer source ISO > xx-XX Consumer > xx-XX LTSC
    Like this (replace business with LTSC):
    https://forums.mydigitallife.net/threads/windows-10-svf-repository.63324/page-205#post-1597176

    For my 17763.1 and 17763.107 SVFSFX exe files it's just download the en-US LTSC EVAL ISO and the SVFSFX exe patch of the desired language and run the SVFSFX exe patch next to the EVAL source ISO.

    Use the ready made $OEM$ folder from the KMS_VL_ALL project files by @abbodi1406 and it will be activated during installation.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  6. Enthousiast

    Enthousiast MDL Tester

    Oct 30, 2009
    29,094
    44,664
    390
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. Kyle Edwards

    Kyle Edwards MDL Novice

    Jun 14, 2020
    10
    0
    0
    Thanks!!! I was a little confused about this,so all I need to do is really on that post of yours in the end,thanks for this post too :)
     
  8. TechGuyGeek

    TechGuyGeek MDL Novice

    Jul 19, 2017
    7
    2
    0
    Is there a way to add the new WDDM 2.7 (Hardware-accelerated GPU scheduling) to the LTSC?
     
  9. BetADNA

    BetADNA MDL Junior Member

    Jul 26, 2015
    79
    49
    0
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  10. LovesPugs22

    LovesPugs22 MDL Novice

    Jun 15, 2020
    7
    1
    0
    #5411 LovesPugs22, Jun 20, 2020
    Last edited: Jun 20, 2020
    Hey guys i'm a bit of a noob so i hope this question makes since, How can i verify that the LTSC iso i want to download from this forum is an official unmodified copy of the original iso from microsoft, The checksums aren't available to the public right? So how can i compare them like i could with windows pro or something.
     
  11. LovesPugs22

    LovesPugs22 MDL Novice

    Jun 15, 2020
    7
    1
    0
    Follow up question, Is there a go to person that everyone downloads from? So far i've founds links from LostEd and GezoeSloog.
     
  12. KleineZiege

    KleineZiege MDL Member

    Dec 11, 2018
    143
    41
    10
  13. Carlos Detweiller

    Carlos Detweiller MDL Spinning Tortoise

    Dec 21, 2012
    3,740
    3,491
    120
    On MDL, only original ISOs are allowed. That's what you will get from the notable members you mentioned - originals.

    Oh please, do we look like "the public" here? :sticktongue: LTSC ISOs (non EVAL) aren't available to the public, either, right? :animatedwink:
     
  14. LovesPugs22

    LovesPugs22 MDL Novice

    Jun 15, 2020
    7
    1
    0
    I appreciate the help @KleineZiege @Carlos and @haz367, I know how annoying it can be answering very basic questions, Thanks again.
     
  15. Enthousiast

    Enthousiast MDL Tester

    Oct 30, 2009
    29,094
    44,664
    390
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  16. Ramiro Pistoia

    Ramiro Pistoia MDL Member

    Dec 24, 2018
    153
    71
    10
    It's pòssible to integrate Edge Chromium into LTSC 2019? And how to do this?
     
  17. abbodi1406

    abbodi1406 MDL KB0000001

    Feb 19, 2011
    10,752
    44,739
    340
    Yes, if you could find the download link for kb4559309 for 17763

    no, it will not be really integrated, it will only get executed (installed) during system installation (first logon)
     
  18. nnolex

    nnolex MDL Novice

    Jul 4, 2019
    3
    0
    0
    Hi guys, use win 7 for years, now want try win 10 ltsc, but I got lost in topics and posts. I want remove all trash with telemetry including defender, MSRT and other stuff with true up to date hosts configuration. Direct me to the right topic in the forum please.