[DISCUSSION] Windows 10 Insider Preview Build 14279

Discussion in 'Windows 10' started by marek848, Mar 4, 2016.

Thread Status:
Not open for further replies.
  1. germanhess

    germanhess MDL Member

    May 26, 2012
    155
    27
    10
    In 14271 build there is same version of driver than 14279 and working fine but I install now 14279 again

    I hope get lucky
     
  2. pisthai

    pisthai Imperfect Human

    Jul 29, 2009
    6,955
    2,075
    210
    Drivers from one Build may NOT works in another Build!!
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. germanhess

    germanhess MDL Member

    May 26, 2012
    155
    27
    10
    Done! But the problem is again
    In other networks WiFi of my street I can see box to fill with password but whit mine not
     
  4. pisthai

    pisthai Imperfect Human

    Jul 29, 2009
    6,955
    2,075
    210
    In Windows 10, from what I know, tyou could not set the password directly, you'll need to click on an WiFi Icon for to connect, and if a username and/or Password is needed, the rquire box for to fill will pop up!

    I have that problem with the WiFi of one of my ISP outsite my home and office too. There will be not any asking for Username and password, it simply will connect and in browser ikt will go to the ISP's site and bring up the WiFi Logon, whit the filed for to keyin username and password. In 8.1 I was able to set directly in my Laptop, in 10, NOT ANYMORE!!
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  5. Hadron-Curious

    Hadron-Curious MDL Guru

    Jul 4, 2014
    3,574
    532
    120
    I just noticed that.
     
  6. amsk98

    amsk98 MDL Junior Member

    Sep 8, 2013
    57
    5
    0
    pppoe dialup connection connected but dns failed to resolved

    any one can provide me solution
     
  7. joylancer

    joylancer MDL Novice

    Mar 16, 2015
    14
    8
    0
    #127 joylancer, Mar 7, 2016
    Last edited: Mar 7, 2016
    Please check cbs.log.
    "Failed to load sfp DLL from path: C:\WINDOWS\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_10.0.14279.1000_none_25a158fc7f85c69d\\wrpint.dll [HRESULT = 0x8007007e - ERROR_MOD_NOT_FOUND]"
    Copy
    "C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack-onecore_31bf3856ad364e35_10.0.14279.1000_none_5a92ee0dd788e433\wrpint.dll"
    to
    "C:\WINDOWS\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_10.0.14279.1000_none_25a158fc7f85c69d\\wrpint.dll"
    and SFC /SCANNOW running
     
  8. khon

    khon MDL Member

    Nov 18, 2008
    134
    20
    10
    At first it's everything ok except sfc /scannow then after a restart I can't even reach my router :(
     
  9. JohnyGS

    JohnyGS MDL Member

    Apr 11, 2014
    100
    23
    10
  10. TONSCHUH

    TONSCHUH MDL Addicted

    Jun 11, 2012
    815
    285
    30
    I finally got my Main-PC updated as well, but had a few issues (my base was build 14271 en-gb)

    - Got the en-us ESD from WZOR and created an ISO with integrated drivers and updates with it.
    When I tried an in-place upgrade, I got a "Something happened (Install failed)" - error, after 16-18%.
    . Then I tried a clean-install, but after the first restart I got an "inaccessible boot device" - error.

    - Used the WU-ESD from my wife (en-us), but got the same issue.

    - Integrated also the en-gb language-pack, but that didn't work either.

    - Deleted all partition's of the Windows-SSD, but then I got a "Grldr not available on all drives" and an in-place upgrade gave me the same error as before.

    - Checked the Anti-Beacon and made sure that nothing was applied, but had the same issues afterwards.

    - Tried to fix the MBR with WinRE, but fixed nothing.

    - sfc /scannow found no errors.

    - Tried the GPT / UEFI - Way, but got again issues.

    - Removed the Spybot Anti-Beacon and got finally the WU-Update offered.

    - Installed via WU, but it booted back into my 14271 build.

    - Tried it via WU again and manually chose the Boot-Drive via Bios after each restart and got it finally installed.

    :)
     
  11. Enthousiast

    Enthousiast MDL Tester

    Oct 30, 2009
    24,556
    34,719
    390
    Conclusion? Don't use (badly) modded installmedia? ;):D:D
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  12. dk2463

    dk2463 MDL Senior Member

    Jun 19, 2011
    257
    20
    10
    I get Error Access is Denied when trying this via Admin CMD
     
  13. Gharlane00

    Gharlane00 MDL Addicted

    Aug 26, 2009
    536
    134
    30
    YOu have to take ownership of the target folder from TrustedInstaller and give to the administrator group
     
  14. TONSCHUH

    TONSCHUH MDL Addicted

    Jun 11, 2012
    815
    285
    30
    Yeah, looks like it.

    :)
     
  15. TONSCHUH

    TONSCHUH MDL Addicted

    Jun 11, 2012
    815
    285
    30
    I have the same problem with a TP-Link TL-WN321G and a D-Link DWA-110.

    The WiFi-Key got entered in Build 14271, but there is no option to do so in Build 14279 and if I try to connect, then I get the message "Can't connect to this Network".

    The Network is shown as "secured".

    :g:
     
  16. germanhess

    germanhess MDL Member

    May 26, 2012
    155
    27
    10
    I've not been able to find a solution about this problem TONSCHUH and I returned to 14271
    Great bug indeed
     
  17. TONSCHUH

    TONSCHUH MDL Addicted

    Jun 11, 2012
    815
    285
    30
    #137 TONSCHUH, Mar 8, 2016
    Last edited: Mar 8, 2016
    Yeah, it's a bit annoying.

    I only need WiFi for my wife's Surface Pro 3 and for our Desktop-PC's only to be able to cast Netflix to our Chromecast-2.

    :confused:
     
  18. linkenpark

    linkenpark MDL Member

    Feb 4, 2016
    112
    9
    10
    how about 10278, it is winmain.
     
  19. polochamps2004

    polochamps2004 MDL Junior Member

    Oct 19, 2011
    70
    9
    0
    #139 polochamps2004, Mar 8, 2016
    Last edited: Mar 8, 2016
    Edit: Update just showed.

    Build 14279 still doesn't show on my updates.
    Current Build is 10586.122

    Things I did:

    - set to Fast Builds
    - ran sfc /scannow
    - ran DISM

    How long does it take to appear?
     
  20. yousif

    yousif MDL Member

    Dec 14, 2013
    185
    92
    10
    It seems that you're not in the Insider Program!
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...