Disable lan in bios, reboot make sure it boots and re enable Ive not tried this as i dont have realtek lan but ...if its l drivers then it shouldnt stop you from booting and logging on if its disabled in bios, also if its booting properly, look for updated lan from manufacturer and install Microsoft will install trusted drivers but usually outdated My intel lan doesnt work properly with microsoft installed driver, loopback and hardware tests fail, i have to install my own
Thanks will try as you say, but all the computers at my place have dual nics, onboard+pcie, most of them are realteks, so it will be a pain heh.
Also a pain but you could trying getting a build installed, get all drivers up to date, export the drivers and then integrate them into the newer image. At least you would only need to do the hard part once.
Here I just unplugged the network cable. At the end of the Windows installation, I updated the realtek driver. I reconnected the network cable and everything worked correctly.
Already did that, actually all my installs are clean and unplugged but no luck with this windows version.
This is crazy, 3rd different computer I try 22621 and still getting the same error (BSOD on first reboot, at setting devices stage), i hashed the iso just to rule out integrity and looks correct: E09F9786DE816729D0BE56B74AC64B07E6E89B95 Any idead of what could be wrong? If its importante the processors are i5-4570, Ryzen 5 2600X and i3-10105F
The .iso is downloaded directly from MS servers, will try to create a new one from uupdump and see if it works this time.
Try the US version and change the system language post install. Also try the Enterprise ISO if this suits you.
It could be an issue with your USB drive where you write your ISO to. Use a different usb stick at least 8GB.
the hash check was done from the usb drive and from the hard disk, both match. edit: also tried to run a clean install using wintohdd which mounts the .iso and runs the setup form hard disk.
Good morning, I have w11 22622 on and it happens to me that when the screen turns off, because it has been programmed to turn off after five minutes, when I give it to continue working, the screen turns on but does nothing, the mouse moves but does not open the I give it to open, the ebge, the file explorer, nothing obeys, can you give me an idea why it happens, thanks in advance.
22622 does not open network printers! 22622 does not copy from NAS error (does not create folders) 22622 doesn't copy files from USB flash drive error (doesn't create folders) 22622 is full of s**t!!!
22621.232 here & network printer is working here, see the attached ss no issue in copying from any USB drives (flash & mass storage devices) as well