ummm... thank you for all the links but the link for WDK in the first post seems to be wrong? it links to the SDK which doesn't including some utility i was looking for in the WDK. had to download the entire EWDK.
dont know what to tell u...im going to do a clean install on the machine having issues on the weekend and see what happens.
sorry could not help other than to say works here and other than the smb tick to show comp, network is as always, cheers Last think, reboot your modem
Help, is this the recommended version to install? en_windows_10_business_editions_version_1803_updated_march_2018_x64_dvd_12063333.iso sha1: 28681742fe850aa4bfc7075811c5244b61d462cf
Pro VL or Enterprise VL Also can I trust the iso if all the checksums match? I didn't do the decrypt official esd method CRC32: BADE72C4 MD5: 70EA72FB3FF11771DCC0A36E2850E29E SHA-1: 28681742FE850AA4BFC7075811C5244B61D462CF
Drivers could be a mess! I would do the following: download all latest Drivers for Windows 10 from the Manufacturers of the used Hardware place all downloaded drivers into a Folder like c:\Dev-Driver extract all compressed drivers in that new folder also, check on Websites like DriverSpace for 'modified' Drivers for the Hardware in use and place them into that new driver folder into a subfolder like \Man-Driver, process as in 3. disconnect all drives, storages except the main SSD/HDD start Windows and open Device Manager uninstall all drivers but not restart Windows install the new drivers one by one using Update Driver and point them first to the new folder like: c:\Dev-Driver\Man-Driver if a driver isn't found in c:\Dev-Driver\Man-driver, point to just c:\Dev-Driver restart Windows only after all new drivers are installed already and test everything is working If now Windows works ok, connect the disconnected hardware back one after one and test for working. I hope that would help, as that's the way I use and it helped many times already. Good Luck.
Man, ALT + Tab on this version is slow. ALT + Tab on RS3 was instant on DOTA 2 for example. Now it's slow and buggy.
Try this. Its work for me: Code: Dism.exe /online /enable-feature /featurename:NetFX3 /All /Source:G:\sources\sxs /LimitAccess G: is mounted ISO drive
If the checksum match with the one from MS you can trust it You can download an official ISO or you use ESD instead If you use ISO you need the en_windows_10_business_editions_version_1803_updated_march_2018_x64_dvd_12063333.iso or en_windows_10_business_editions_version_1803_updated_march_2018_x86_dvd_12063341.iso depends on what architecture you have