Drivers and tools to run Windows XP on newer hardware

@ExtremeGrief

TXTSETUP.SIF
search for wmilib.sys and paste the following lines:
storport.sys = 1,,,,,,3_,4,0,0,,1,4

DOSNET.INF
d1,storport.sys

Dietmar

 

To fix "keyboard" problem?

 

@diderius6
@ExtremeGrief

The file TXTSETUP.SIF does not storroprop.dll = 100,,,,,,,,3,3, ah storprop.dll = 100,,,,,,,,3,3

 

It's storprop. I guess it was a typo.

 

@ExtremeGrief

To save yourself alot of hassle I recommend using the optional patch integrator included with Integral Edition. It'll automate all of this.

use options 1,3,4,5,7 then press X.

If you have the problematic 149C controller you'll need to buy a 3rd part USB card, at least until a fix is found.

 

If I try to boot integral edition it's stuck at Setup is starting Windows

Is there no way to get 149C USB?

 

@ExtremeGrief

Make a try with Ramsey XP with ALL USB disabled in Bios
Dietmar

PS: And use as Sata driver only the AMD Sata driver(!) from Ramsey, Option (I).

 

What is ramsey? Also my bios doesn't allow to disable USB

 

@ExtremeGrief

Ramsey is the author of integral edition.

For freezing at "Setup is Starting Windows" try pressing F5 at the start of textmode setup and then select "Multiprocessor ACPI PC"
In my case this was the only option that did not freeze, all other HAL options did not work for me.

 

I selected "ACPI Multiprocesor PC" and it's still stuck.

 

@ExtremeGrief

If it's anything like my Threadripper 3960x - It might be panicking over too many CPUs (It doesn't like more than 32)

Try turning off SMT and 1 or 2 CCX in BIOS and see if that allows you to continue.

If you have a 3960x like me, turning off SMT should be enough.

 

I have a Ryzen 3 3100 and Gigabyte B450M DS3H

 

@ExtremeGrief

Do you get the same behavior with Vanilla Integral Edition ISO?

Try the optional patch integrator with ACPI/AHCI/USB3 but without the NVMe driver, on VMs the NVMe driver shows this behavior, perhaps it is also doing the same for you.

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

With vanilla iso it's not stuck but i get 7B BSOD

 

@ExtremeGrief

7B BSOD can be either AHCI or USB3. At least you are not getting A5 BSOD.

If you're using USB as your installation media I suggest getting a 3rd party USB3 PCI-E card since we don't have a fix for the 149C controller at the moment.

 

I don't have extra USB cards or PS/2 peripherals and can't get any at the moment so I guess I can't get USB working on my PC. When i integrate the MovAX xHCI driver it will get stuck at Setup is Starting Windows.

 

@ExtremeGrief

Use a SATA CD rom drive, because without working USB,
any USB devices do not work.

And use only Option (4, I) with the Ramsey XP
Dietmar

 

Is there no other way? I don't have any DVD ROM, or even DVDs.