If you're not going to activate XP it's okay to leave it blank... It's better if you flash BIOS from DOS Prompt
Hi Trying to use this tool on an AMI bios for an ASUS laptop (z71v). I get the following error. If someone has time to give it a read I would be most grateful. (used SSV3 + Dell SLIC 2.1 and Dell SLP) Version 1.28 Manufacturer - ASUS Original BIOS size 524288 bytes (512K) 7000C Module 11 Padded size 8200 72028 Module 8 Padded size 1944 727D4 Module F3 Padded size 376 72960 Module F7 Padded size 40 7299C Module C Padded size 8 8 Module 1B Padded size 167476 (Actual size 167475 Original size 365375) 28E54 Module 20 Padded size 44924 (Actual size 44921 Original size 65024) 33DE4 Module 20 Padded size 44084 (Actual size 44084 Original size 64000) 3EA30 Module 20 Padded size 36828 (Actual size 36825 Original size 65536) 47A20 Module 20 Padded size 35032 (Actual size 35032 Original size 63488) 50310 Module 20 Padded size 31808 (Actual size 31807 Original size 53248) 57F68 Module F1 Padded size 30476 (Actual size 30476 Original size 162723) 5F68C Module 4 Padded size 17184 (Actual size 17184 Original size 27977) 729B8 Module F0 Padded size 11560 (Actual size 11558 Original size 55104) 639C4 Module 21 Padded size 9460 (Actual size 9460 Original size 21184) 65ED0 Module 18 Padded size 5956 (Actual size 5953 Original size 16409) 67628 Module F2 Padded size 4172 (Actual size 4170 Original size 5605) 756F4 Module 19 Padded size 1436 (Actual size 1436 Original size 4868) 68688 Module 29 Padded size 1412 (Actual size 1412 Original size 3824) 68C24 Module 1A Padded size 1332 (Actual size 1330 Original size 9890) 75CA8 Module 6 Padded size 680 (Actual size 677 Original size 1415) 6916C Module 2A Padded size 400 (Actual size 400 Original size 736) 75F64 Module 80 Padded size 80 NVRAM at 76000 length 2000 ROM Hole at 6FFF0 length 10 Bootblock at 78000 length 8000 Boot block checksum not valid
@Busykid508, Thanks a lot!!! Do we not have an ASUS specific SLIC 2.1 yet? I could not find one in the "Slics_SLP_Certs" or along with the "slictool128". I guess its all the same (currently have added HP SLIC 2.1 to my P5B Deluxe's BIOS), but having an ASUS SLIC 2.1 in the BIOS is more... errr... satisfying
Great work guys! I added HP SLIC 2.1 to my ASUS P5Q BIOS and my Windows 7 Ultimate x64 activated just fine. Many thanks!
Give the name of the motherboard model and a link to download the bios and I will check it out for you.
What is the equivalent tool for Intel? Last year, someone managed what you see below, but it would have been 2.0 and not 2.1. D865GBF - revision: P25 slic = Asus, Fzeven, tested by acidrock
Modded my Asus P6T Deluxe V2 0504 BIOS with a Lenovo 2.1 SLIC, Cert and the leaked Key and Win7 is now activated However, my vista which I dual boot is now 'not genuine' even using the same Lenovo cert and a Lenovo key for vista ultimate? How to get Vista activated with a SLIC 2.1?
Man, you're a god. After melting my brain for about a week searching how to mod the bios. Finally thanks to you, i was able to do it! Thank you so much!! Now, i have a question. This will work with any loader? Beacause i used the HP cert in here. So, when i use the loader i have to use the HP cert or what? Thanks again! Bye, MerolaC
With a modded bios you only need the serial and a certificate (on first page of this thread). Don't waste your time with any loader!
Mmm, you mean the files ending with XRM-MS? If are those, any serial will work? Specially this one. 22TKD-F8XX6-YG69F-9M66D------ ? As you can see i'm a noob Thanks for your help Bye, MerolaC
Successfully modded my BIOS and flashed it, and Everest shows the cert, but I'm going to wait until closer to official release to install. My RC install is fine as it is.