How to Modify Your Own Bios Using AMI Mod Tool and Award Mod Tool

Discussion in 'BIOS Mods' started by Busykid508, Jul 29, 2009.

Thread Status:
Not open for further replies.
  1. dbdb

    dbdb MDL Junior Member

    Aug 22, 2009
    65
    0
    0
    Here the file, bios 1404, no loader no key installed, flashed clear cmos, load default, dump
     
  2. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,917
    1,941
    300
    #582 NoJuan999, Aug 25, 2009
    Last edited by a moderator: May 23, 2017
  3. applegate

    applegate MDL Member

    Aug 1, 2009
    226
    51
    10
    Quote:
    Originally Posted by 911medic
    Can I get a dump from factory bios flash?? I take it reboot doesnt help. You need to clear cmos and load defaults after flash.

    I tried to flash it with DELL, HP and LENOVO (SLIC 2.1) and none of them are working on ASUS P5E3 with bios 1404. The SLIC DUMP TOOL V2.0 gives always the same info (must be something wrong).

    Did it succesfully before on other mobo's with Windows 7 and Vista. Also used the latest AMI slic tool v1.32 and tried all the new leaked keys.

    I hope dbdb and 911medic can help (also tried the clear cmos with no luck).
     
  4. 911medic

    911medic MDL Guru

    Aug 13, 2008
    5,772
    503
    180
    I wish you guys would forget the slic dump tool..use the rweverything.

    Just because you have a SLIC in bios, does not mean activation. You need other factors to be met..

    Did you try the Aflash tool from DOS???
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  5. Rackerz

    Rackerz MDL Novice

    Aug 25, 2009
    9
    0
    0
    Fantastic work!

    Followed the guide and used the HP Slic 2.1 and HP Cert, flashed, rebooted and all activated. Screw the loaders!

    Will be posting modded BIOS as I don't think there is one for my board.

    Thanks fellas.
     
  6. dbdb

    dbdb MDL Junior Member

    Aug 22, 2009
    65
    0
    0
    #586 dbdb, Aug 25, 2009
    Last edited by a moderator: May 23, 2017
  7. 911medic

    911medic MDL Guru

    Aug 13, 2008
    5,772
    503
    180
    #587 911medic, Aug 25, 2009
    Last edited by a moderator: May 23, 2017
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  8. dbdb

    dbdb MDL Junior Member

    Aug 22, 2009
    65
    0
    0
    yes the loader works !
    I don't know how disassemble the bios
    AND i am 0 whit ASM.lang i google-it to understand how is :eek:

    we can try whit downgrade bios to older version ? (1301 is the one i have when installed 7)
     
  9. 911medic

    911medic MDL Guru

    Aug 13, 2008
    5,772
    503
    180
    If the older versions work with SLIC and you dont need the newer bios, downgrade.

    Not all new bios versions are better, most are basically the same with some CPUID added. If you like the older bios version, and it can be used with slic, then by all means downgrade!!
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  10. dbdb

    dbdb MDL Junior Member

    Aug 22, 2009
    65
    0
    0
    i don't need the new one , but i don't know if the old work whit SLIC , I try now!EDIT: i can't downgrade whit ez flash, ??? how i can do it?
    How i can make a bootable usb for try flashing whit Aflash ?
     
  11. applegate

    applegate MDL Member

    Aug 1, 2009
    226
    51
    10
    You have to use the floppy with the dos aflash program.

    It's a pain in the **h because I have no floppy any more (have never tried a bootable USB before).

    I also found out you cannot downgrade easily by using the windows or standard motherboard utililty.

    Going to try this tomorrow evening.

    Greetings applegate (also turned on APCI 2.0 with again no luck)
     
  12. dbdb

    dbdb MDL Junior Member

    Aug 22, 2009
    65
    0
    0
    don't worry about this , bootable + aflash + bios don't fit in a 1.44 floppy

    it's time to learn bootable usb (have never tried to)
     
  13. Jimmy666

    Jimmy666 MDL Novice

    Aug 22, 2009
    13
    0
    0
    Hi!
    I want to modify my bios file by hand, because it didn't work with this tool.
    SLIC Dump Toolkit says: Dump SLIC Fail !

    Can anyone help me?
     
  14. Busykid508

    Busykid508 MDL Guru

    Jun 4, 2009
    5,562
    371
    180
    What is it that you need?
     
  15. Jimmy666

    Jimmy666 MDL Novice

    Aug 22, 2009
    13
    0
    0
    A guide?
    I want to insert the SLIC table manually in my AMI bios.
     
  16. Busykid508

    Busykid508 MDL Guru

    Jun 4, 2009
    5,562
    371
    180
    Why do you need to insert manually? The AMI tool does it quite nicely.
     
  17. Robert Tu

    Robert Tu MDL Novice

    Aug 18, 2009
    7
    0
    0
    Busykid508:
    Could you please provide another link for downloading the "HOW_TO_FILES",such as rapidshare? I can't get it by the existing ones, thanks a lot!
     
  18. applegate

    applegate MDL Member

    Aug 1, 2009
    226
    51
    10
    Moded BIOS 1404 ASUS P5E3 1404

    BusyKid508,

    Sorry, your modded bios send to me didn't work for ASUS P5E3 BIOS mod 1404.

    See more info in a PM message.

    Applegate.