Hi thanks again, for help me, i know the MPM status, solved some weeks ago. I call You again if i've other problems. Thanks for the remotely help!! Thanks again Anto
Thank you LatinMcG for your response I placed 363CF1D.bin file into formatted fat32 flash and renamed the file to 363C.bin Fn+Esc does not do anything the laptop just start normally, but pressing Windows+B the laptop tries to run something from usb for like 5 to 10 seconds then it start with no change. should I go for the second method? can you guide me please?
I tried to identify the chip, it's very hard what I can read is (winbond 25x40a) I already ordered CH341A 24 25 Series does it work for my chip and what are the steps to use this programmer? Best regards
It's been a while I've recieved the programmer (CH341A Pro) but now I am confused because I found another chip on the mother board wich is (WINBOND 25X16AVSIG) so wich one is the bios chip?can you help me please?
I am trying to read from (winbond 25x40a) chip but with ch341a 1.3 version program it gives me an error while trying to detect chip : (Access violation at address 0097EA42. Read of address 0097EA42) Trying other versions it does not detect and when I select chip manually and try to read it just give me all FFFF what should I do???LatinMcG please help.
First thing I tried to program (winbond 25x40a) chip while it is soldered as I thought it is the bios chip, I had backuped the data after several tries with various programs then I erased and tried to write the bios to the chip and I think that I did that wrong because I do it while the chip vis soldered to the board. After that, I figured the other chip the (WINBOND 25X16AVSIG) when I read it I have data similar to the original bios so I know that what I done with the other chip is wrong. I desoldered the (winbond 25x40a) and write the backup file that I made at the beginning, then I sodered it again and desoldered the (WINBOND 25X16AVSIG) and write the original bios, after resoldering the chip I tried to run the board but it does nothing, it's bricked. I tried to restore everything to original status but no response. The (winbond 25x40a) gives voltage reading when the motherboard is connected to a power source even without clicking the power button, while the bios chip shows no voltage either with or without pressing the power button. I think that when I tried to write to the ship while it is soldered it interfered with other chip. is that right?is there any solution?
Hi to everyone Im poorya My laptop is hp pavilion dv6-6c55se And have corrupted bios problem ( caps light is blinking ...) I read posts and i have 2 important questions 1 : how find the right name for bios files?? (bin and sig or other) 2 how to create the flash for recovery? I hope i can fix this with your help Thanks for everything