You're also using BIOS v1.45? sometimes one bios can be used for a couples of models... And I think this one already prove to be working and tested by other members I need to know what flash program you use? is it Insydeflash or Flas**t? Have you check SLIC using RW-Everything to make sure the SLIC is not replaced with the 2.1?
I just compared the hex of these 2 files: - the bios that is choosen automaticaly from the windows-flash (that will be changed in background in a .bin file) - and the 3 .fd files... now i know it's the second file... First install the default to delete error? That infos from slic dump toolkit were shown to me before i ever installed a modded bios, to see what slic my mb have! plz help me!!!!
This bios is reported as working four times. The windows flash utility should flash the correct one. Are any flashing? To flash from dos, flash FLAs**t bios.fd /ALL You can also alter the platform .ini to say the same for windows, but I think it is already done. It needs change ALL=0 to ALL=1 if it is disabled. The flash utility for windows should pick the bios file for you. You should not have to change the platform file.
911medic... Do you think we should put mini guide in 1st post? a lot of people seems don't know what to do after they got their bios modded LOL
I know i know, now i know which of the .fd files are the one for my bios to flash with flas**t! i've tested that one that was postet by bgage and by you. i tested to flash under win and dos. after flash, it says, flashing ok etc etc and reboot! but after reboot i start slic dump toolkit and see SLIC 2.0 and the errors postet from me earlier! But the point is, these errors were be there in the original bios, as i never flashed it before... (sry, for my english, i'm just only a german-scum)
Your english is fine. There are many non-native speakers in here...I'm not one, either No need to call oneself scum btw.
Hehe lol, only meand it ironically because of the 'things' we made for about 60 years on the rest of the world...but thats the wrong board for a discuss like that.
So the error were already there since the first you've got the laptop? I never use slic dump toolkit so I can't comment on that... I though you already post RW Everything info with no error before This error message only from slic dump toolkit program?
okay... don't know whats with the red means... but looks like the slic is okay to me.. but still 2.0... Lets recap... flash from dos using /all -> done enter bios and load setup default -> done/not done?
you're right, only that dumb toolkit seems to show errors! ok ok, i will now do all again in next 2mins: boot in dos use flash it reset default in bios wait, will be back soon EDIT: Nothin' - booted DOS - Used FLAs**t xxxx.FD /ALL Flash was completed correctly! - Reboot, loaded defaults from BIOS RW: how can i see if slic 2.0 or 2.1 is presented in the .fd-file, before flashing???
Then they shouldn't be playing.. We can't flash it for them.. @supdrmann Maybe time to breathe..Just relax a bit and think it through. Sometimes you need to adjust something small. Find a way to load all defaults in the bios, maybe flash the original .fd to start with a fresh bios again. We can even try to mod the backup, as I think that the windows generates a backup file. Double check you have the correct files on hand also. Once you get back to square one, we can start all over...Isn't this FUN?????
LOL.. sorry for misunderstanding Yeah... I didn't know that before so I made one... now I already make list of bios already modded up to this point... so I got quick reference list without having using search function ps: sorry 911medic for double/triple post before