Hi, I was reffering to your 1st post, the link in your second one worked for me and i did take a look at your bios and as i said it's too old and the known method of modification will not work with it. Slic of 1.0 means it will work right now only for Windows XP. If i was you i would try to activate W7 using some retail key but over the phone only. I heard it still might work and it's safer than using lo.ders. Good luck!
Hi. I have an Acer 5315 with the 1.43 bios on it. I downloaded the modded bios here to implement SLIC 2.1 on my system but it didn't flash it or anything. Any ideas would help. Just let me know what I need to post to make it easier.
Hi, please tell me which bois have you downloaded and what do you mean "it didn't flash"? What happened? And what exactly did you do to flash your bios?
Signature"SLIC" Length0x00000176 (374) Revision0x01 (1) Checksum0x17 (23) OEM ID"ACRSYS" OEM Table ID"ACRPRDCT" OEM Revision0x00000001 (1) Creator ID"MSFT" Creator Revision0x01000013 (16777235) OEM Public Key Structure Type0x00000000 (0) Length0x0000009C (156) Key Type0x06 (6) Version0x02 (2) Reserved0x0000 (0) Algorithm0x00002400 (9216) Magic"RSA1" Bit Length0x00000400 (1024) Exponent0x00010001 (65537) Modulus0xB3 0x6D 0x83 0x60 0x8D 0x83 0x65 0x6E 0xE6 0x4B 0xA7 0x6F 0x38 0x04 0x31 0xC1 0xE2 0x45 0xBF 0x34 0x66 0x1F 0x17 0x91 0x7F 0x5C 0x15 0x12 0xB7 0x01 0x4D 0x57 0x6D 0x8E 0xAE 0x6B 0xE4 0xCC 0xF8 0xA0 0xE1 0xBB 0x79 0xFF 0x08 0x53 0xE3 0x77 0xE7 0xD4 0x70 0x5E 0x5C 0xEF 0x6F 0x81 0xDD 0x1B 0x5F 0x30 0xE2 0x99 0x9B 0xB9 0xD0 0x93 0x46 0xAB 0xD8 0x17 0x7A 0xE0 0xF0 0xA7 0x4C 0x32 0xD4 0x91 0x86 0xBA 0xA1 0x6C 0xA2 0x3C 0x73 0xCF 0x86 0x2D 0x95 0x9A 0x06 0x50 0xF3 0xF7 0x7E 0x06 0x5B 0x5E 0x27 0x66 0x01 0x3A 0x31 0x9F 0x0C 0xB1 0x91 0x96 0x49 0x5C 0xCC 0x81 0xBA 0x77 0x32 0x52 0xB2 0x10 0x5D 0x5B 0xCA 0xDE 0x9D 0x25 0x90 0x95 0xF7 0x97 SLIC Marker Structure Type0x00000001 (1) Length0x000000B6 (182) Version0x00020000 (131072) OEM ID"ACRSYS" OEM Table ID"ACRPRDCT" Windows Flag"WINDOWS " Reserved0x01 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Signature0x49 0x90 0xAC 0x34 0x3B 0x98 0x88 0x52 0x62 0x2C 0xFB 0x25 0xA8 0xA9 0xA0 0x7D 0x2D 0x12 0x70 0xEE 0xD5 0x9A 0x7C 0xCF 0x0C 0x83 0xB4 0x29 0x1B 0x55 0x3B 0x88 0xA5 0xF7 0xE6 0x29 0xA9 0x2C 0xE7 0x17 0x5D 0x7A 0xEE 0x38 0x4D 0x27 0xE0 0xA9 0x69 0x7C 0xFC 0x20 0x4A 0x68 0x0B 0x5D 0x83 0xAD 0xE5 0xD6 0x6E 0x49 0xC1 0x66 0x28 0xE4 0xD4 0xCE 0x72 0x64 0xA1 0x7C 0xBE 0x93 0xAD 0x64 0x32 0xDA 0xCC 0x72 0x24 0x47 0xFE 0xB4 0x97 0x87 0x01 0x55 0xA0 0x5D 0x2F 0xEF 0x06 0x93 0xE8 0x87 0x84 0x59 0xD3 0x9B 0x25 0x53 0x27 0xE7 0xCA 0x75 0x65 0xCF 0x0E 0x40 0xC9 0x3B 0xAA 0x03 0xF2 0x83 0x7E 0x27 0xE7 0xCA 0x47 0xA4 0x4B 0x1F 0xC5 0x77 0xDF 0x8C Thank you for your all of your help. As you can see from the above it did in fact patch me to SLIC 2.1.