Did so: Performing the emergency flash: - Shutdown the netbook (notebook) - Remove all peripheral devices - Remove battery, Remove AC power cord - Press and hold the power button for 10 seconds (battery and AC power still out), then release - Put the USB Memory Stick in the USB port - Hold "Fn" + "Esc" and plug the AC power cord in - Now press the power button (whilst still holding Fn + Esc). Wait until the fan will run, then release "Fn" + "Esc" keys - The fan will run for about 2-10 minutes and the USB drive activity LED will blink - I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off no result USB FLASH=32MB/FAT
There are two different Platforms or models and Insyde choice the right one to flash, You have to mod both, but in your case sp6xxx.exe not moddable RSA Key not leaked yet ! You can use PMTool to see if bios file is decryptable or not, when using it and You get Decrypt and RSA.SIG files is all ok, otherwise not moddable. Regards [MULTI_FD] Flag=1 FD#01=PCI,0,0,0,2C,FFFFFFFF,1962103C,01966.fd FD#02=PCI,0,0,0,2C,FFFFFFFF,1963103C,01966.fd FD#03=PCI,0,0,0,2C,FFFFFFFF,1965103C,01966.fd FD#04=PCI,0,0,0,2C,FFFFFFFF,1966103C,01966.fd FD#05=PCI,0,0,0,2C,FFFFFFFF,1967103C,01966.fd FD#06=PCI,0,0,0,2C,FFFFFFFF,1968103C,01966.fd FD#07=PCI,0,0,0,2C,FFFFFFFF,1960103C,01961.fd FD#08=PCI,0,0,0,2C,FFFFFFFF,1961103C,01961.fd FD#09=PCI,0,0,0,2C,FFFFFFFF,1964103C,01961.fd FD#10=PCI,0,0,0,2C,FFFFFFFF,1969103C,01961.fd ;Flag default : 0. ; 0 : Normal mode. ; 1 : Multi-FD mode. It will reference FD#XX values. ;FD#XX Integer : XX is decimal number from 01 to 99. (FD#01 ~ FD#99) ;This section supports IO space type, PCI address type and multiple condition type. ;FD#XX=IO,[Offset],[Mask],[Value],[File Name],[ME File Name],[INI File Name] ;FD#XX=PCI,[Bus],[Device],[Function],[Offset],[Mask],[Value],[File Name],[ME File Name],[INI File Name] ;FD#XX=MPCIIO,[Conditon Number],PCI-[Bus]-[Device]-[Function]-[Offset]-[Mask]-[Value],IO-[Offset]-[Mask]-[Value],[File Name],[ME File Name],[INI File Name] ;FD#XX=CPUMSR,[Offset],[Mask],[Value],[File Name],[ME File Name],[INI File Name] ;FD#XX=ID,[Model Name],[File Name],[ME File Name],[INI File Name] ; [Offset] : Offset in hex. ; [Mask] : IO type supports BYTE, WORD and DWORD in hex. ; For example, BYTE -> 03, WORD -> 0A01, DWORD 100400D3 ; PCI type supports DWORD in hex only. ; CPUMSR type supports QWORD in hex only. ; [Value] : IO type supports BYTE, WORD and DWORD in hex. ; PCI type supports DWORD in hex only. ; CPUMSR type supports QWORD in hex only. ; [Model Name] : The platform ID, model name string. ; [File name] : File name of FD. ; [ME File name] : ME File name of FD. If it exists, utility will run OEMME flash feature. ; [INI File name] : INI File name for overwrite. ; If it exists, utility will load the new ini file and overwrite all sections (except [MULTI_FD]) exist in new ini file. ;When [Offset] & [Mask] == [Value], it will flash the following files ([File Name] and [ME File Name]).