Hi, this might be a good idea. I can't find my list with flas**t command line switches but I also thought that with /all all areas were effected including CMOS clearing. Am i wrong?
sorry here it is /X Non-IHISI flash process (Broadwater) /DC Disable comparsion in normal flash process /RC Reset cache (Must use with /X) /BIOS Flash Intel BIOS region (Must use with /X) /? , H This flash utility help /1 Save current BIOS to file (1Mbits from memory) /2 Save current BIOS to file (2Mbits from memory) /4 Save current BIOS to file (4Mbits from memory) /8 Save current BIOS to file (8Mbits from memory) /16 Save current BIOS to file (16Mbits from memory) /AB Check battery life percent /AC Do not check AC plug in /ALL Flash all /B Flash PEI volume /BEEP On flashing beep /BIOS Flash BIOS region /C Clear COMS /Desc Flash DESC region /DI Disable ID display /E:Offset(Hex), Size(Hex), Address(Hex) Update fix size from file offset to physical address /EC Flash EC (by applicaion) /EC:String Flash EC (by applicaion) and BIOS (by IHISI) /ECB Flash EC (by applicaion) with BIOS (by IHISI) /EV Erase variable (ASCII) /EVG:GUID Erase variable (ASCII) by user's GUID /FD Flash DXE /FE Flash EC /FILE:FILENAME Before Flash to erase variable from file. /FL Flash logo /FM Flash CPU Microcode /FN Flash OEM NVS /FP Flash password /FT:value Flash OEM special type /FV Flash Variable /G Save current BIOS to file (from IHISI). /GbE Flash GbE region /GU:String Compare GUID with current BIOS /I:String Update logo.(may need Himem.sys) /LF Load Fd file by another floopy disk /LG:String GUID. Update small logo required. (Must use with /I, /WV, /WU) /MC Skip all platform model check /ME Flash ME region /N Do not reboot after flash /O:String Output file (Must use with /I) /PI Dump BVDT protection MAP /PMCA:ModelName Used to check Platform model name /PMCAF:FileName Used to check Platform model name /PN Flash non-SPI flash part /PQ Query ROM protection MAP in current ROM /PR Query region MAP in current ROM /PS Flash SPI flash part /RB:Filename Read variable (To a binary file) /RM Protect the region who is not in the same address /RV Read variable /S Shutdown after flash /SE:String Compare serial number with current BIOS /U Show confirm message /UU:String Compare UUID with current BIOS /V Verify file integrity /WB:Filename Write variable (From a binary file) /WH:Filename Write HDCP key /WU:String Write variable (UNICODE) /WV:String Write variable (ASCII) btw i found info for /all ForceFlash] ALL=1 BB_PEI=0 CPU_Microcode=0 Variable=0 DXE=0 EC=0 Password=0 OEM_NVS=0 Logo=0 Type#09=0 Type#08=0 ;ALL 1 -> Flash all ROM part. 0 -> Resverd all protect areas. ;BB_PEI, CPU_Microcode, Variable... ;1 -> Force flash these area if BIOS report them are protected areas. ;0 -> Protect these area if BIOS report them are protected areas. this is from insyde winflash version good luck in bios modding
Hi, no - this is no go, this mod is no good - OEMID and OEMTableID are not changed. We don't mod Sony yet as there is no slic 2.1 available at this moment.
It works for some people and doesn't for other and unfortunately we didn't figure out yet where the problem is.