Hello, idon't know if i'm in the right section but i need help if someone could help me. i have a packard bell (Windows 8) that i flash the bios. after that it still black screen and nothing else happenig. i use for the followed model packard bell eg70bz this flash EG70V105.fd ( EG70x64.fd ). i use a usb formatted with fat16 and 32 under windows7 x64 then i follow the procedure unplug all device, batteries, ac adapter pluged usb then holded esc+fn then pluged ac power and power button but nothing happen.. is that correct what i am doing ?
Post a Bios Link or upload Original One ! May be your Bios is Capsulated, so It will not work ! It needs to be Decapsulated before try Recovery Mode ! Regards
Hello Everybody! I'm new here, and I'm looking for modded bios for Acer TM5740, I saw the old posts, but file is offline, has anybody this file? Thanks.
hi, i did everything point by point but no reaction. the usb stick also no light. maybee it will helpfull, i do all under windows 7 x64 to prepare what i need, formatting , pasting file... and the bios from packard bell easynote EN LE11BZ is uefi, there is nothing special with this technologie? i forget before when the laptop was running correctly and i made a clear cmos , after that it won't boot ... thanks
Have You disabled SecureBoot ? To disable create a Supervisor Bios Password (after You can remove It) then disable SecureBoot and choice legacy USB Boot ! I don't know more about ! regards