1. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Post Bios Link or Upload It here !
    But sp6xxxx.exe are not moddable at this moment,
    ask to Donovan6000 for experiments !
    Let me know
    Regards
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Ok I forgot It as there is the same Bios version for laptop too !
    But problem is FPT from Dos using USB !
    Your Eeprom is Write Protect if I remember as You got error 28 into result file.
    can You check It.
    If so We haven't possibility to reflash Bios in this way, only using an SPI PGM !
    Let me know
    Regards
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  5. xseaplus

    xseaplus MDL Novice

    Jul 3, 2014
    13
    0
    0
    Yes it shows Error 28
    Error 28: Protected Range Registers are currently set by BIOS, preventing flash access.

    One thing i want to ask about that:
    When i extract V1JV1X64.exe (Acer bios zip exe file) it extractes itself to %temp% folder with a BIN file, named isflash.bin
    This BIN file creates a platforms.ini file when i try to run InsydeFlashx64.exe (in temp folder)
    In this platform.ini file, password and clearcmos values are set to 0
    Isnt it possible to correct that values 0 to 1 in isflash.bin file? I believe if they come with 1 value by default, it will flash password and cmos and will clear bios password...
    I tried to do that with a hex editor and flashed new bin file but it gave me an error "Invalid firmware image!!!" (i may did something wrong, i am a regular user, not an expert, but trying my best...)
    Am i wrong?

    If yes i am in the wrong way, tell me about SPI PGM, Whats the next?

    By the way, thank you so much for your efforts replying me...
     
  6. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  8. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  9. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  10. BDMaster

    BDMaster MDL BIOS/EFI Modifier

    Aug 2, 2009
    821
    313
    30
    Ok friend,
    don't use Capsulated Bios for Recovery It can brick your system !, so don't touch isflash.bin
    only way to use Capsulated Bios is by InsydeFlash !
    The Backup Bios is only Bios Region so 4096 KB and without FPT is not possible to reflash !
    Recovery works only using keyboard keys, so You haven't Keyboard and Recovery Mode
    don't start !
    We have to ask to Serg008 and Thanh2h, may be They can help us !
    I think that You can try using an USB Hub and Usb Stick and keyboard togheter on It
    trying if Bios listen Keys at start-Up to let work Recoery (but error 28 gives issue) !
    You are sure that cannot Boot from USB Stick in Dos Mode to use FPT ?
    Regards
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...