So I just unzip the file, use the tool and boot to it and it will do it for me? If my PC does not support USB boot could I burn it to a bootable CD with UltraIso?
I need a bios mod for this one: -Manufacturer: Intel -Motherboard Model: S5520SC -Bios revision: 60;58;30;112 -Bios Type: Intel -Bios Download Link:ttp://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20641&lang=eng&OSVersion=OS%20Independent&DownloadType=Firmware Thank you!
Sorry, I was tied up for a while so I never got the done. How do I run the Windows version? Inside the OA2INTEL folder there are 2 executable files, oa2intel.exe and oa2intelwin.exe. thanks
Code: IV.Windows mode: 1.Unzip all files from the archive "oa2intelMODE.zip" into Drive C:\ default folder . Then go to the folder oa2intelWIN 2.Run command line to click cmd.pif and type: cd c:\oa2intelwin\. 3. Select method of modifications - with automatically with batch file or manually. 4. Run batch file *.cmd (ASUS.cmd, HP.cmd, DELL.cmd, Gigabyte.cmd) and at the end of the process restart your computer. 5. In case of failure, go to manual mode. 6. Commands: OA2INTELWIN.exe update pubkey.bin marker.bin sign.bin. (This is flashing Bios with that files). OA2INTELWIN.exe erase (This is Debugging Bios-backup). OA2INTELWIN.exe setmarker marker.bin (Control marker.bin file) OA2INTELWIN.exe status (Status: flashed Bios or not). Utility must give you in a case of successful flashing the message: "Programmed". VI. Reboot, run SLIC_Dump_Toolkit and make sure that there pubkey and marker in the BIOS. VII. Then insert the key, certificate, and activate the system. Now, you must also set your BIOS to optimized features.
Greetings...I have been reading through and am a little confused, I just got a intel DH67GD board and am trying to slic it, but it won't touch the modified bios file, should I be using a different method then the Pheonix EFI Tool?
Could you please rebuild the bios for windows 7 (SLIC 2.1). Thank you. -Manufacturer: Gateway (GM5638E) -Motherboard Model: Intel DG33SXG2 -Bios revision: 05/22/2008 (DPP3510J.15A.0316) -Bios Type: Intel EFI -Bios Download Link: leteckaposta.cz/233196436 -RW Everything Report Download Link: leteckaposta.cz/721130032
I tried Auto KMS method. So far it works well. I want to have more options to activate Win7, so I wanted to BIOS with SLIC 2.1 Thank you so much for the advice, I'll try it.
BIOS Mod Request Could someone please help me with that? I have modded many BIOSes before, but this one is out of my league it seems. It does require an advanced knowledge of BIOS Modding... Who is up to this challenge? -Manufacturer: HP ProLiant ML110 G7 E3-1240 1P 8GB RPS Server/S-Buy -Model Number: 656766-S01 -Bios revision: J01 -ROM Size: 0x7F (8192KB) -Bios Type: HP ROMpaq (UEFI???) -Bios Download Link: f t p : / / f t p .hp.com/pub/softlib2/software1/pubsw-windows/p1696499611/v69132/SP53226.exe[/noparse] -RW Everything Report Download Link: [noparse] h t t p : / / w w w .datafilehost.com/download-848be824.html I have tried the following: 1. Searched for existing BIOS Mod and found nothing 2. Read up on modding HP ROMPAQs 3. I tried to unpack a bios file using a ROMPAQ but was unable to load output file using: a) phoenixtool195.zip b) awardtool152 c) amitool162 PLEASE HELP adding HP Server Windows 2008R2 SLIC2.1 into this BIOS. Also what tool would you recommend to use for flashing since ROMPAQ.EXE checks for header signatures. Thank you, Anton