Intel EFI (Bios) Mod for Slic 2.1

Is there any way (maybe alternative) to integrate SLIC 2.1 into BIOS for MB Intel DH77EB? (except waiting for oa3intel)

 

I did it on Intel DH67GD by using info in post #6.
Turn Windows date back to 2009 or you will get an error.

 

So Intel released oa3intelwin -- i read about slic 2.2 and slic 3.0 - 3.0 needs online... 2.2 does not.. but can you insert slic 2.1 USING oa3? oa2 will not work on this board, even with the date rolled back....

 

I've been trying to mod this bios since I got it in 2008 then I gave up and got it going with the Daz Loader.

It's been a couple of years since I tried to mod it but I would like to try again.

There may not be a solution. I cannot even seem to find the .bio file on the hdd and the ITK program cannot find the file.

Here's all the nfo I can get out of it.

It's an intel DG965OT and it's in a Gateway and cannot figure out what model it came out of:
In the Bios setup here's some of the info:
MQ96510J.15A.0319.2006.1228.1552
Ver.# AA D75595-201
Ser.# BQOT705002QE
Intel Management Engine Info 2.0.5.1124

Your help is greatly appreciated.

 

-Motherboard: Intel GC11020M from Emachines T5082
-Bios Revision : GC11020M.86A.1087 (1087)
-Bios Type : Intel/efi/Inside
-Bios SLIC : 2.0 need 2.1
-Bios Link : mediafire.com/?4igzpnepj23uu5m
-Rw Report: mediafire.com/?mw6kw8bisjd4jah

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

Does any body know if I have chance to ad slic 2.1 into Intel DQ77KB board. I've been searching forums but could not find any info. Thanks

I have tried to use OA2Intel with clock backward but SLIC_ToolKit_V3.2 reported that no slic present.
So, i found this thread "Tool to Insert/Replace SLIC in Phoenix / Insyde / Dell / EFI BIOSes" (sorry, cant post links yet) and tried with Phoenix tool. I used orognal BIOS from here downloadmirror.intel.com/21819/eng/KB0043P.BIO

I have selected "Other" as manufacturer, "HP" for other fields and "Module" as method (actually also tried with "Dynamic"). The Phoenixtool reported success. I tried to open moded BIOS in Intel ITK (integrator toolkit) and Intel soft said that it can't verify digital signature of bios (or similar)

Now i'm warring to proceed further with flushing BIOS.
Can anybody tell me exactly if Intel DQ77KB is modable. Help me, please. I've got black desktop already and it's really annoying me. Thanks for ur help in advance.

 

hi.. please help me with this board.:
-Manufacturer: Intel
-Motherboard Model: G945GCCR
-Bios Slic: None
-Bios Download Link: downloadmirror.intel.com/16762/eng/CR94510J.86A.0060.EB.EXE

THX

 

i can confirm that oa2intelwin worked great on DG965WH MB.

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

Is that recommended over using a loader nowadays?

 

I'm very much interested in buying an Intel DQ77KB board, but has anyone successfully managed adding a SLIC 2.1?

 

Tried to use ITK 5.0 with OA3 Tool to insert EFI on my DQ77KB, is this possible? oa2 use a marker, pubkey and pkey 3 files. OA3 uses only one file, only for Windows 8? I'd like to add only SLIC 2.1 for Windows 7 though.

Anyone could give a hint?

 

So Intel 7 Serie board is no go for hard mod? No Phoenix Tool, no ITK method?

 

Phoenix tool injects the slic but the signature of the .bio file no longer matches so it refuses to flash

 

Hmm, last time I tried, using Module method, flashed using iflash2.exe under pure DOS. It seems to have flashed. But I shut down the machine like an idiot (iflash shows no flash progress). So the mainboard was bricked(I can't even recover it), I can't say its because of the mod or because of the shutdown. So I dare not to test it again, cause don't want to wait for repairing.