IPIBL-LB - X&RSDT problem

Discussion in 'BIOS Mods' started by ultradan, Sep 6, 2009.

  1. ultradan

    ultradan MDL Novice

    Sep 3, 2009
    2
    0
    0
    hi guys;

    with my luck, this has been covered somewhere on here but i've searched both here and on google with zero success so far... here's my issue:

    i've got an Asus IPIBL-LB board that i've flashed with a slic 2.1 rom i found on these boards. i had attempted to install win7 ultimate before, and though it took my code and said it was valid, it wouldn't activate. i deleted the win7 partition i made and decided to start fresh (restore default bios, etc etc) and this time around i noticed this in my SLIC dump toolkit:

    [​IMG]

    X&RSDT has that != next to it which i'm pretty sure means there's a problem which is holding up my lovely win7 install.

    if there's any other info i can provide you guys with, let me know :)

    thanks in advance!
     
  2. davidxxw

    davidxxw MDL Junior Member

    Aug 9, 2008
    97
    492
    0
    #2 davidxxw, Sep 7, 2009
    Last edited: Sep 7, 2009

    yes, "!=" is not Recognition errors.

    OEM ID/Table "RSDT" = "XSDT" = "HPQOEMSLIC-CPC"
    OEM ID/Table "PUBKEY"="MARKER"="HPQOEMSLIC-MPC"


    Please use 2.1Beta to test.(more information than before)
    http://slics.myftp.org/Tools/SLIC_Dump_Toolkit/SLIC_Dump_ToolKitV21.Beta.rar
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. 911medic

    911medic MDL Guru

    Aug 13, 2008
    5,778
    488
    180
    Mod it with the -CPC SLic found in the pack. It is really not that difficult. If you cannot use the tools, request the specific slic in the boards...
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. twiz

    twiz MDL Senior Member

    Jul 30, 2009
    401
    1
    10
  5. ultradan

    ultradan MDL Novice

    Sep 3, 2009
    2
    0
    0
    #5 ultradan, Sep 7, 2009
    Last edited by a moderator: May 23, 2017
    (OP)
    thanks guys... here's two shots with the 2.1beta slic:

    [​IMG]

    [​IMG]

    i downloaded the cpc bin and xrm-ms from this thread:
    http://forums.mydigitallife.net/threads/2183

    i just got in from being out and about, but i'm going to do as much reading and searching as i can... but if anyone can help point me in the right direction it would be much appreciated :)

    thanks again guys!

    edit:
    i've downloaded the ami slic tool package and i'm hoping that somehow combining this with the modified bios i found will be what i need to do... the file was called BEN5.37 and was modded to allow for slic 2.1. the problem with simply flashing it as is is the whole mpc vs cpc deal. this is where i know i'm over my head... help :(
     
  6. VisionxOrb

    VisionxOrb MDL Novice

    Sep 22, 2008
    2
    0
    0
    I have the same problem, I used the 5.37 bios from here, it flashed fine but wont activate and slic dump has the same X&RSDT !=. Shows xsdt and rdst as HPQOEMSLIC-CPC but the Pub key and marker are -MPC
     
  7. VisionxOrb

    VisionxOrb MDL Novice

    Sep 22, 2008
    2
    0
    0
    just and update, I used the 5.32 version done by Yen and it works.
     
  8. kocoman

    kocoman MDL Senior Member

    May 16, 2007
    328
    4
    10
    What is the 5.32 version by Yen
     
  9. hfp

    hfp MDL Novice

    Dec 25, 2009
    3
    0
    0
    #9 hfp, Dec 25, 2009
    Last edited: Dec 25, 2009
    problem with P5E3 BIOS X&RSDT !=

    info from: SLIC ToolKit V3.0 in attachments

    SLIC ToolKit V3.0 - Basic screen.jpg

    SLIC ToolKit V3.0 - Advanced screen.jpg

    SLIC ToolKit V3.0 - ACPI screen.jpg

    AMI SLIC Mod v1.42 used to create ROM-file

    Cert.: Read OK ! ( DELL_V2.1_Cert.xrm-ms ) Cert. OK
    Status: Dump OK ! ( DELLQA09_V2.1 )
    X&RSDT !=
    SLIC Status: Ivalidated

    - Activation unsuccessful :(

    please, help!
     
  10. secr9tos

    secr9tos MDL Addicted

    Jul 28, 2009
    999
    133
    30
    The slic is there but the x/rsdt is messed up.
     
  11. hfp

    hfp MDL Novice

    Dec 25, 2009
    3
    0
    0
    Thanx for answer!

    But I don't know how to correct this - my exp too low :(
     
  12. secr9tos

    secr9tos MDL Addicted

    Jul 28, 2009
    999
    133
    30
    Did u search in the "Award & Ami bios mod request" thread if your bios has been modded already?
     
  13. hfp

    hfp MDL Novice

    Dec 25, 2009
    3
    0
    0
    #13 hfp, Dec 25, 2009
    Last edited by a moderator: Apr 29, 2017
  14. nicholasf

    nicholasf MDL Novice

    Oct 15, 2008
    18
    0
    0
    #14 nicholasf, Dec 30, 2009
    Last edited: Dec 30, 2009
    I have the same problem :-(

    SLIC ToolKit V3.0 gives me the following error:
    X&RSDT !=
    SLIC Status: Invalidated

    I have mod the bios with AMI slic tool 1.42.
    Can anybody explain to me how to repair messed X&RSDT?
     
  15. ajgambino

    ajgambino MDL Novice

    Aug 19, 2009
    9
    0
    0
    I have the same problem..anybody care to help?
     
  16. NoJuan999

    NoJuan999 Experienced SLIC Tool Operator

    Jul 31, 2009
    9,919
    1,930
    300
    #16 NoJuan999, Feb 22, 2010
    Last edited: Feb 23, 2010
    nicholasf and ajgambino,
    Read all previous posts in this thread.
    They tell you EXACTLY what the problem is.
    But I guess I'll say it again.
    SLIC MUST Match the existing RSDT for this BIOS to work properly.

    If your RSDT is HPQOEMSLIC-CPC then SLIC must be HPQOEMSLIC-CPC.

    If your RSDT is HPQOEMSLIC-MPC then SLIC must be HPQOEMSLIC-MPC

    If your RSDT is HPQOEMSLIC-CPC, this one will work for you:
    http://forums.mydigitallife.net/thr...Bios-Mod-Requests-section?p=238927#post238927
    Confirmed Working by ajgambino (Flash with AFUDOS)
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  17. Osiris

    Osiris MDL Novice

    Jan 22, 2010
    9
    0
    0
    This BIOS can use any SLIC but it has a config lock where it reads a fixed OEM table this must be changed first. I actually made a copy of this BIOS that works with 7 and allows Mac installation. If anybody needs it let me know and I'll put it up or you can grab it @ HackinT0sh;)