IR5 - The Official Windows 7 Rearm Solution

Immediately after installing Windows 7 Ultimate Build 7600, I used Windows 7 Loader Slic Activation Release 5 and RemoveWAT v2.1 to permantely remove the timer and notifications. I used this method every time I rebooted my PC (after a few months or so). It worked flawlessly until I decided to try out Windows XP Mode for Windows 7. Windows XP Mode ran checks to see if my system was genuine before it installed and that's where I screwed up. It somehow reactiavted the timer and notifications.

So, I tried your tool and it didn't work properly for me because of that. I know it didn't work because I just recently got the "Windows is not genuine" notification this morning when I turned on the PC. But you know, before I used your patcher, I used it to check the remaining time on my trail and it did in fact say 0 days and 2 rearms. After using it, it shows the "!" only. At this point, I'm guessing I'm totally screwed and I may have to reinstall Windows 7 after all... Unless you know of some way to get around it. I'm going to try uninstalling your tool and uninstalling RemoveWAT, then using your tool again to see if anything happens.

Ok. This is prior to uninstalling IR4: 3.1 and undoing RemoveWAT.

Code:

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0x8004FE22
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-YG69F-9M66D-PMJBM
Windows Product Key Hash: /kehptF9HHVxM5d8dUnqgcfndXw=
Windows Product ID: 00426-OEM-8992662-00497
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {6679892E-4704-4E85-B583-FA3E61165B8E}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7600.win7_rtm.090713-1255
TTS Error: 
Validation Diagnostic: 
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed

File Scan Data-->
File Mismatch: C:\Windows\system32\sppcomapi.dll[Hr = 0x80070005]
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\en-US\user32.dll.mui[6.1.7600.16385], Hr = 0x800b0100

Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{6679892E-4704-4E85-B583-FA3E61165B8E}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7600.2.00010100.0.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-PMJBM</PKey><PID>00426-OEM-8992662-00497</PID><PIDType>2</PIDType><SID>S-1-5-21-989585450-1087342819-3485010930</SID><SYSTEM><Manufacturer>System manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>0602   </Version><SMBIOSVersion major="2" minor="5"/><Date>20090804000000.000000+000</Date></BIOS><HWID>30B93607018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-MPC</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>  

Spsys.log Content: 0x80070002

Licensing Data-->
Input Error: Can not find script file "C:\Windows\system32\slmgr.vbs".

Windows Activation Technologies-->
HrOffline: 0x8004FE22
HrOnline: N/A
HealthStatus: 0x0000000000002000
Event Time Stamp: 11:28:2010 01:52
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui


HWID Data-->
HWID Hash Current: QAAAAAMABgABAAEAAgADAAAAAQABAAEA6GEgdwfGb25QIrwgjCZGvGhlhDQciOwTmqiN7+HCmojO2OZE1L1Gyg==

OEM Activation 1.0 Data-->
N/A

OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information: 
  ACPI Table NameOEMID ValueOEMTableID Value
  APICA_M_I_OEMAPIC 
  FACPA_M_I_OEMFACP 
  HPETA_M_I_OEMHPET 
  MCFGA_M_I_OEMMCFG 
  OEMBA_M_I_AMI_OEM 
  OSFRA_M_I_OEMOSFR 
  SLICHPQOEMSLIC-MPC

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

Np, and it would be best to unstall the loader either way because trail oem :slp would seem odd to microsoft and would be easy to see

 

helo timeshurfer, this application is very nice.... but i have some problem...(T.T)

when i follow the instruction :
1) Read these instructions then click the yes button
2) Your computer will automatically restart and in a moment you will be asked to enter
your language and login information
3) Select command prompt and type "C:IR4" (without quotes) then press enter
4) Ignore any non-genuine messages and wait till you get a window with this data

in step number 3,
i select command prompt and show x:\windows\system32\
and i type like the instruction : C:IR4

but i got C:IR4 is not recognized as an internal or external command

help me plis... i'm newby here...

 

WHS Vail Question

Hi Timesurfer:
First, I wanted to thank you for the excellent work on this patch. Your effort is truly appreciated. I'm currently running a time-limited version of Windows Home Server Codename Vail. FYI, Vail is built on Server 2008 R2. I really like the software and would like to evaluate it past March of 2011 (when my trial expires). This is especially important to me since Microsoft recently decided to drop the Drive Extender feature of Vail by the time it goes RTM. I have activated the software using a key from Microsoft and currently have two rearms available. I'd like to use your patch, but am wondering if I should wait to run the program until the trial period is finished. I actually installed a second copy of WHS on a virtual machine and was able to extend the rearm count from two to four using IR4, but that knocked out my original activation efforts (I’m assuming this happened because another key was installed with your patch). Of course, it was not a problem reactivating WHS using the original key, but I wonder if I should change the time when rearm starts working in Task Scheduler to March of 2011. Thanks for any and all your thoughts on this matter.

 

Hi timesurfer:
Thanks for the quick reply. I understood from reading parts of this thread (and from trying it out for myself on a virtual machine) what the function of your program was. I guess I was just wondering if it made more sense to keep my server in a perpetual trial or to let the activation period run out before applying your patch. I also was wondering if I need to rearm my server once before applying your patch. Thanks again!

 

It would be nice if someone can take the time and explain step by step guide on how IR4 solution works (or if timesurfer's can share the source better), keep in mind that the download only give to you the binary.

I'm taking my first steps and would like to learn and know if I can apply the same procedure use in IR4, to another software like for example Microsoft Point of Sale 2009.

 

Hi

I don't know whether this is purely coincidence, but immediately after rearming Windows 7 my desktop gadgets no longer appear. Has anyone else experienced this or have a solution?

Thanks

 

Hi

It turned out to be a registry error which I was able to fix fairly quickly. Thanks for the info and reply though.

Cheers

 

Hi - major, major problems here.

First time I've had to reinstall. Tried it 4 or 5 times now. Keep getting the not genuine message. Command prompt says it's successful but remains 'not genuine'. Keep getting 'no such interface supported' when I try to open folders (have to right click, open).

Please help - I don't have a clue what to try.

Thanks in hope and anticipation

P