Marvell Controller Card Issues

Discussion in 'PC Hardware' started by DeathStalker77, Oct 21, 2019.

  1. DeathStalker77

    DeathStalker77 MDL Senior Member

    Nov 8, 2009
    385
    26
    10
    #1 DeathStalker77, Oct 21, 2019
    Last edited: Oct 21, 2019
    Hello all!

    I have an IOCrest card (I/O Crest 8 Port SATA III PCIe 2.0 x2 Non RAID Controller Card) and it's recently started dropping the drives attached to it when I copy data to or from one of the drives connected to it (non-RAID).

    Can cards like this just start to go bad in this manner?

    Thanks!
    ===================

    The Hardware ID is VEN_1B4B&DEV9235 and I'm using the current 92xx drivers.
     
  2. pcnavarra

    pcnavarra MDL Senior Member

    Nov 13, 2017
    304
    118
    10
    PCI Express x2 interface max 4 Sata III ports, guess thats the problem.
     
  3. DeathStalker77

    DeathStalker77 MDL Senior Member

    Nov 8, 2009
    385
    26
    10
    Ummm, I've no idea where you get that statement from ....
     
  4. pcnavarra

    pcnavarra MDL Senior Member

    Nov 13, 2017
    304
    118
    10
  5. DeathStalker77

    DeathStalker77 MDL Senior Member

    Nov 8, 2009
    385
    26
    10
    Not sure why those are relevant - there are plenty of 8 port cards out there.

    My question still remains unanswered - can a card or a port on a card just "go bad" ?
     
  6. WindowsGeek

    WindowsGeek MDL Addicted

    Jun 30, 2015
    827
    168
    30
    The answer is yes HW can go bad best way is to swap it out with another card or test that one in another machine to see if it fails.