Well heres what I got Serg008 Iflashed a v1.2 board with a 2.0 bios I used the ami recovery trick hold ctrl and home got the screen but it would only accept the wrong bios so I named the correct version the incorrect name of the one I flashed wrong and it flashed and I got a beginning screen that said bios is damaged entering setup press any key and it begins 6 second count down goes black again any suggestions thanx
1. What revision of the motherboard you have? 1.1 or 1.2? 2. You keep the old version of the BIOS before flashing? rename the correct version as AMIBOOT.ROM and try to restore from it. Good luck
@jughead1111 : why did you flashed with 2.0 bios ?, it 's the original and old one of 2009/12 for vers 1.2 Mobo (EUP). So Look at the PCI Express slot (big blue) what revision you have (bottom right near the SATA slots). And Then, you have a safe way : trying first the slic Bios BEFORE flashing it, --> enter in Bios setup, enable flashing, it enable the line below, go in the line below and choose ''start booting the bios from your USB key'' so if all the start is OK you are right and you can Flash in dos on the USB key with a autoexec.bat and ''A:/afudos.exe'' command line in it to start, space and the file name bios with the extension, ''enter'' and it will tell if all is OK at the end of the flash. Last Bios for Mobo 1.2 is Vers 2.4 (extension .240 in bios file name) and posted by Serg on the post N° 1896. Last Bios for Mobo 1.1 is Vers 1.7 of may you initialy speak about.