When the GUI QT is run under Win_PE a lot of the results wont show because some required parts in the OS are missing, such as .Net (unless added in) even P/Shell can be missing too. Have added more checks in and the GUI QT will run on WinPE but as mentioned don't expect a lot of results to be of any use! CPU information in my test was totally missing!! WMIC/WMI not seem to operate correctly under Win_PE Example of W7 WinPE: Spoiler: GUI QT WindowsPE results Code: ------------------------------------------------------------------------------------------------------------------- Query Tool GUI v0.10.3.1 ------------------------------------------------------------------------------------------------------------------- Log Date {UTC}: 12/01/2022 -- 09:30 {24-hour} Some results may be shortened to fit the output stage, such as RAM information. This is the postable report that does not contain full serial or sensitive information. On Hypervisors some results may be missing due to being unable to detect. GUI Font Used : Lucida Console Size: 11 =================================================================================================================== Operating System Information =================================================================================================================== Installation Type : WindowsPE Name : Microsoft Windows 7 Ultimate OS/CPU Architecture : CPU is 64 bit , OS is only 32 bit Build : 6.1.7600 Language : English (United States) Native Language : English Installed/Available Languages : en-us Stock Keeping Unit {SKU} : 48 Experience Pack : N/A Installation Date : 1/1/1970 at 0:0 AM {UTC} Shipped with Reserved 7GB : N/A Dirty Shutdown Count : N/A Build Branch : N/A Product ID : N/A TimeZone {TZUtil} : Hours offset from GMT : -8 Daylight Saving In Effect : Undefined Daylight Adjust Clock Mode : Disabled/Unchecked Upgrade or Clean Installation : Clean Previous OS Upgraded From : N/A Hypervisor Present : No Virtual Machine Data : This computer does not appear to be a virtual machine Windows Key 1 Installed : Unable to decode Windows DpID4 Installed : Windows Default Installed : Windows Default4 Installed : TPM Information : N/A =================================================================================================================== System Drive X: Partition Information =================================================================================================================== Drive Type : Non SSD BUS Type : Unknown Total Space : 0.09 GB Free Space : 0.09 GB Partition Type : MBR Firmware Boot Type : Unknown State Secure Boot Status : N/A File System : NTFS Model Name : Unable to define using Win32_DiskDrive Disk and Partition Information : Driveletter | Disk #, Partition # | Model Name {50 Chars max} | Size 'GB' \\.\PHYSICALDRIVE0 E: | Disk #0, Partition #0 | Samsung SSD 850 EVO 250G SCSI Disk Device | 0.1 GB \\.\PHYSICALDRIVE0 C: | Disk #0, Partition #1 | Samsung SSD 850 EVO 250G SCSI Disk Device | 232.17 GB \\.\PHYSICALDRIVE0 F: | Disk #0, Partition #2 | Samsung SSD 850 EVO 250G SCSI Disk Device | 0.61 GB \\.\PHYSICALDRIVE1 D: | Disk #1, Partition #0 | Seagate ST1000DM010-2EP1 SCSI Disk Device | 931.51 GB \\.\PHYSICALDRIVE2 G: | Disk #2, Partition #0 | Flash Disk USB Device | 0.49 GB Drive letters/Partitions are shown as they are defined via the connected ports in the BIOS. =================================================================================================================== Memory Information =================================================================================================================== Total Physical : 3081628 KB (2.94 GB) Available Physical : 2402144 KB (2.29 GB) Total Page Size : 3081628 KB (2.94 GB) Available Page Size : 2401768 KB (2.29 GB) Total Virtual Size : 2097024 KB (2 GB) Available Virtual : 1989172 KB (1.9 GB) Memory Type : N/A Memory Error Correction : Memory Slots Fitted : WMI call not available on this OS DIMM Information {First Four} : N/A =================================================================================================================== Graphics Information =================================================================================================================== Adaptor Name : Not Detected Adaptor DACType : N/A Adaptor Driver Information : N/A Adaptor Status : Inactive Adaptor Name : Not Detected Adaptor DACType : N/A Adaptor Driver Information : N/A Adaptor Status : Inactive Virtual Desktop Resolution : 1024 x 768 Bits Per Pixel : N/A Video Mode Description : N/A Some values may not be accurate due to 32 bit API limitations. For accurate VRam use DxDiag or other tool. On Hypervisors some results may be missing due to being unable to detect. =================================================================================================================== Network Adaptor Information =================================================================================================================== =================================================================================================================== Processor 1 Information =================================================================================================================== Name : -- Architecture {Bits} : -- L2 Cache Size {KB} : -- L3 Cache Size {KB} : -- Current Speed {MHz} : -- Physical Cores : -- Logical Cores : -- Processor Id : -- Virtualization Mode : Manufacturer : -- Description : -- =================================================================================================================== DMI/BIOS Information =================================================================================================================== System Manufacturer : ASUSTeK Computer INC. System Product Name : FM2A88M-HD+ BaseBoard Manufacturer : Asus/ASRock BaseBoard Product : FM2A88M-HD+ BaseBoard Version : 1.03 BIOS Vendor : American Megatrends Inc. BIOS Release Date : 05/05/2015 BIOS Version : P3.10 Primary BIOS : True SMBIOS Present : True SMBIOS Version : 2.7 SLIC/BIOS Data : _ASUS_ - 1072009 Valid SLIC Name : Asus Possible Brand Theme : Asus {System Manufacturer} SLIC Table Status : Valid marker present {} Emulated SLIC : Not required/used for this OS MSDM Key Description : No MSDM key Description found MSDM Key Detected : Not Present MSDM Key OS Version/Edition : N/A =================================================================================================================== Miscellaneous Information =================================================================================================================== Which MRP Version Used : N/A Wallpaper Style : Stretch image to display resolution Current Theme Used : aero.theme Installed Dot Net Frameworks : Not Detected in Registry Installed Powershell Versions : N/A Security Product Name{s} : No Security Installed Defender Tamper Protection : Disabled Defender Service Status : Boot Windows Firewall Service State : Not Running {Reg: Auto} Windows Activation Status : Windows Licence Reason : Valid key was used for the product's licensing channel Windows Product Key Channel : N/A {R:INS} Device has KMS Enabled : No KMS Auto Renewal (hook) : No MS Office {MSI/Traditional} : Not Detected C2R MS Office : Not Detected C2R Excluded Apps : N/A C2R Last Update Channel : N/A C2R Office Activation Status : N/A C2R Partial Product Key : N/A Office Reason Information : No reason information to show/No Issues Office MAK/KMS Information : No MAK or KMS activation detected ------------------------------------------------------------------------------------------------------------------- WinPE detection is now added and a pop up will show. Have also removed a lot of the msgbox popups only the main important ones will show such as errors. File actions if denied then the OS may show its own msgboxes instead. Most in the GUI QT have now been suppressed. Doing more tests before i upload this GUI QT later today.
Uploaded latest GUI QT - post #3 updated. Less pop ups (or runtime errors), unless critical or OS generated. Updated WinPE detection, tries to use a suitable font if not then pop will appear stating that a default os font will be used - which looks odd but readable. Under WinPE a lot of info will not be available for many reasons: .Net and Powershell issues to name a couple. Even WMI calls seem to be affected.
Worked a bit more with WinPE... Spoiler: GUI QT - WindowsPE Code: ------------------------------------------------------------------------------------------------------------------- Query Tool GUI v0.10.3.4 ------------------------------------------------------------------------------------------------------------------- Log Date {UTC}: 12/02/2022 -- 11:33 {24-hour} Some results may be shortened to fit the output stage, such as RAM information. This is the postable report that does not contain full serial or sensitive information. On Hypervisors some results may be missing due to being undefined in the configuration. GUI Font Used : Lucida Console Size: 11 =================================================================================================================== Operating System Information =================================================================================================================== Installation Type : WindowsPE Name : Microsoft Windows 7 Ultimate OS/CPU Architecture : CPU is 64 bit , OS is only 32 bit Build : 6.1.7600 Language : English (United States) Native Language : English Installed/Available Languages : en-us Stock Keeping Unit {SKU} : 48 Experience Pack : N/A Installation Date : 1/1/1970 at 0:0 AM {UTC} Shipped with Reserved 7GB : N/A Dirty Shutdown Count : N/A Build Branch : N/A Product ID : N/A TimeZone {TZUtil} : N/A Hours offset from GMT : -8 Daylight Saving In Effect : Undefined Daylight Adjust Clock Mode : Disabled/Unchecked Upgrade or Clean Installation : Clean Previous OS Upgraded From : N/A Hypervisor Present : No Virtual Machine Data : This computer does not appear to be a virtual machine Windows Key 1 Installed : Unable to decode Windows DpID4 Installed : Windows Default Installed : Windows Default4 Installed : TPM Information : N/A =================================================================================================================== Booted System Drive Partition Information =================================================================================================================== Drive Type : Non SSD BUS Type : Unknown Total Space : 0.09 GB Free Space : 0.09 GB Partition Type : MBR Firmware Boot Type : Unknown State Secure Boot Status : N/A File System : NTFS Disk and Partition Information : Driveletter | Disk #, Partition # | Model Name {50 Chars max} | Size 'GB' \\.\PHYSICALDRIVE0 E: | Disk #0, Partition #0 | Samsung SSD 850 EVO 250G SCSI Disk Device | 0.1 GB \\.\PHYSICALDRIVE0 C: | Disk #0, Partition #1 | Samsung SSD 850 EVO 250G SCSI Disk Device | 232.17 GB \\.\PHYSICALDRIVE0 F: | Disk #0, Partition #2 | Samsung SSD 850 EVO 250G SCSI Disk Device | 0.61 GB \\.\PHYSICALDRIVE1 D: | Disk #1, Partition #0 | Seagate ST1000DM010-2EP1 SCSI Disk Device | 931.51 GB \\.\PHYSICALDRIVE2 G: | Disk #2, Partition #0 | SanDisk Ultra USB 3.0 USB Device | 114.61 GB Drive letters/Partitions are shown as they are defined via the connected ports in the BIOS. =================================================================================================================== Memory Information =================================================================================================================== Total Physical : 3081628 KB (2.94 GB) Available Physical : 2398636 KB (2.29 GB) Total Page Size : 3081628 KB (2.94 GB) Available Page Size : 2404024 KB (2.29 GB) Total Virtual Size : 2097024 KB (2 GB) Available Virtual : 1989172 KB (1.9 GB) Memory Type : Memory Error Correction : Non-ECC Memory Slots Fitted : 2 DIMM Information {First Four} : DIMM 0 4096MB @ 1333MHz DIMM 0 4096MB @ 1333MHz =================================================================================================================== Graphics Information =================================================================================================================== Adaptor Name : Not Detected Adaptor DACType : N/A Adaptor Driver Information : N/A Adaptor Status : Inactive Adaptor Name : Not Detected Adaptor DACType : N/A Adaptor Driver Information : N/A Adaptor Status : Inactive Virtual Desktop Resolution : 1280 x 1024 Bits Per Pixel : N/A Video Mode Description : N/A Some values may not be accurate due to 32 bit API limitations. For accurate VRam use DxDiag or other tool. On Hypervisors some results may be missing due to being undefined in the configuration. =================================================================================================================== Network Adaptor Information =================================================================================================================== =================================================================================================================== Processor 1 Information =================================================================================================================== Name : AMD Athlon(tm) X4 860K Quad Core Processor Architecture {Bits} : 64 L2 Cache Size {KB} : 4096 L3 Cache Size {KB} : -- Current Speed {MHz} : 1665 Physical Cores : 4 Logical Cores : 4 Processor Id : 178BFBFF00630F01 Virtualization Mode : Manufacturer : AuthenticAMD [AMD] Description : x64 Family 21 Model 48 Stepping 1 =================================================================================================================== DMI/BIOS Information =================================================================================================================== System Manufacturer : ASUSTeK Computer INC. System Product Name : FM2A88M-HD+ BaseBoard Manufacturer : Asus/ASRock BaseBoard Product : FM2A88M-HD+ BaseBoard Version : 1.03 BIOS Vendor : American Megatrends Inc. BIOS Release Date : 05/05/2015 BIOS Version : P3.10 Primary BIOS : True SMBIOS Present : True SMBIOS Version : 2.7 SLIC/BIOS Data : _ASUS_ - 1072009 Valid SLIC Name : Asus Possible Brand Theme : Asus {System Manufacturer} SLIC Table Status : No valid SLIC table Emulated SLIC : Not required/used for this OS MSDM Key Description : No MSDM key Description found MSDM Key Detected : Not Present MSDM Key OS Version/Edition : N/A =================================================================================================================== Miscellaneous Information =================================================================================================================== Which MRP Version Used : N/A Wallpaper Style : Stretch image to display resolution Current Theme Used : aero.theme Installed Dot Net Frameworks : Not Detected in Registry Installed Powershell Versions : N/A Security Product Name{s} : No Security Installed Defender Tamper Protection : Disabled Defender Service Status : Boot Windows Firewall Service State : Not Running {Reg: Auto} Windows Activation Status : Unknown State Windows Licence Reason : Valid key was used for the product's licensing channel Windows Product Key Channel : N/A Device has KMS Enabled : No KMS Auto Renewal (hook) : No MS Office {MSI/Traditional} : Not Detected C2R MS Office : Not Detected C2R Excluded Apps : N/A C2R Last Update Channel : N/A C2R Office Activation Status : N/A C2R Partial Product Key : N/A Office Reason Information : No reason information to show/No Issues Office MAK/KMS Information : No MAK or KMS activation detected ------------------------------------------------------------------------------------------------------------------- Another 5 hours spent just trying to get the CPU info to show under WinPE and adjusted the Storage results section. Best i can do for now - at least a bit more info shown that wasn't before. The Booted drive's model name is removed as it shown in the disk/part info section, plus under winPE it not show as the drive was X: in my test and i just could not get the model name of the booted USB. It was named 'Boot' but no matter what i tried only 'ThisPC/My Computer' would show the drive name, weird. As it not a major issue because the data shows ok when booted 'normally'. Still working on things in the GUI QT so i will upload later when i am happy everything is stable.
GUI QT v0.10.3.4 Uploaded, post #3 updated More info when using WinPE - Shows CPU information and extra Storage data but still no full SLIC/MSDM info unless you install .Net v3.x and v4.0 into the WinPE. Other adjustments to internal code.
WinPE 22000 Spoiler Code: ------------------------------------------------------------------------------------------------------------------- Query Tool GUI v0.10.3.4 ------------------------------------------------------------------------------------------------------------------- Log Date {UTC}: 12/02/2022 -- 22:12 {24-hour} Some results may be shortened to fit the output stage, such as RAM information. This is the postable report that does not contain full serial or sensitive information. GUI Font Used : Lucida Console Size: 11 =================================================================================================================== Operating System Information =================================================================================================================== Installation Type : WindowsPE Name : Microsoft Windows 11 Enterprise OS/CPU Architecture : CPU and OS is 64 bit Build : 10.0.22000 {UBR:1} {Dev} Language : English (United States) Native Language : English Installed/Available Languages : en-US Stock Keeping Unit {SKU} : 4 Experience Pack : N/A Installation Date : 1/1/1970 at 0:0 AM {UTC} Shipped with Reserved 7GB : N/A Dirty Shutdown Count : N/A Build Branch : co_release Product ID : N/A TimeZone {TZUtil} : N/A Hours offset from GMT : 3 Daylight Saving In Effect : Undefined Daylight Adjust Clock Mode : Disabled/Unchecked Upgrade or Clean Installation : Clean Previous OS Upgraded From : N/A Hypervisor Present : No Virtual Machine Data : This computer does not appear to be a virtual machine Windows Key 1 Installed : Unable to decode Windows DpID4 Installed : Windows Default Installed : Windows Default4 Installed : TPM Information : N/A =================================================================================================================== Booted System Drive Partition Information =================================================================================================================== Drive Type : Non SSD BUS Type : Unknown Total Space : 0.98 GB Free Space : 0.98 GB Partition Type : MBR Firmware Boot Type : Unknown State Secure Boot Status : N/A File System : NTFS System Drive Letter : X: { This Drive's letter may be hidden below when WinPE is used } Disk and Partition Information : Driveletter | Disk #, Partition # | Model Name {50 Chars max} | Size 'GB' \\.\PHYSICALDRIVE0 D: | Disk #0, Partition #0 | TOSHIBA MQ01ABD100 | 100.44 GB \\.\PHYSICALDRIVE0 E: | Disk #0, Partition #1 | TOSHIBA MQ01ABD100 | 100.37 GB \\.\PHYSICALDRIVE0 C: | Disk #0, Partition #2 | TOSHIBA MQ01ABD100 | 92.16 GB \\.\PHYSICALDRIVE0 U: | Disk #0, Partition #3 | TOSHIBA MQ01ABD100 | 638.54 GB \\.\PHYSICALDRIVE1 W: | Disk #1, Partition #0 | TOSHIBA External USB 3.0 USB Device | 931.51 GB \\.\PHYSICALDRIVE2 Y: | Disk #2, Partition #0 | SanDisk Ultra USB Device | 14.48 GB Drive letters/Partitions are shown as they are defined via the connected ports in the BIOS. =================================================================================================================== Memory Information =================================================================================================================== Total Physical : 8250964 KB (7.87 GB) Available Physical : 6919392 KB (6.6 GB) Total Page Size : 8250964 KB (7.87 GB) Available Page Size : 3436432 KB (3.28 GB) Total Virtual Size : 4194176 KB (4 GB) Available Virtual : 4042172 KB (3.85 GB) Memory Type : DDR4 Memory Error Correction : Non-ECC Memory Slots Fitted : 2 DIMM Information {First Four} : DIMM A 8192MB @ 2400MHz =================================================================================================================== Graphics Information =================================================================================================================== Adaptor Name : Microsoft Basic Display Adapter Adaptor DACType : +t• Adaptor Driver Information : 10.0.22000.1 {2006/06/21} Adaptor Status : Active Adaptor Name : Not Detected Adaptor DACType : N/A Adaptor Driver Information : N/A Adaptor Status : Inactive Virtual Desktop Resolution : 1366 x 768 Bits Per Pixel : 32 Video Mode Description : 1366 x 768 x 4294967296 colors {Ref:1} Some values may not be accurate due to 32 bit API limitations. For accurate VRam use DxDiag or other tool. =================================================================================================================== Network Adaptor Information =================================================================================================================== =================================================================================================================== Processor 1 Information =================================================================================================================== Name : Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz Architecture {Bits} : 64 L2 Cache Size {KB} : 512 L3 Cache Size {KB} : 4096 Current Speed {MHz} : 2901 Physical Cores : 2 Logical Cores : 4 Processor Id : BFEBFBFF000806E9 Virtualization Mode : Enabled Manufacturer : GenuineIntel [Intel] Description : Intel64 Family 6 Model 142 Stepping 9 =================================================================================================================== DMI/BIOS Information =================================================================================================================== System Manufacturer : Dell Inc. System Product Name : Inspiron 15-3567 BaseBoard Manufacturer : Dell Inc. BaseBoard Product : 0765NJ BaseBoard Version : A00 BIOS Vendor : Dell Inc. BIOS Release Date : 08/18/2021 BIOS Version : 2.16.0 Primary BIOS : True SMBIOS Present : True SMBIOS Version : 3.1 SLIC/BIOS Data : DELL - 1072009 Valid SLIC Name : Dell Possible Brand Theme : Dell {System Manufacturer} SLIC Table Status : No valid SLIC table Emulated SLIC : Not required/used for this OS MSDM Key Description : No MSDM key Description found MSDM Key Detected : Not Present MSDM Key OS Version/Edition : N/A =================================================================================================================== Miscellaneous Information =================================================================================================================== Which MRP Version Used : N/A Wallpaper Style : Stretch image to display resolution Current Theme Used : aero.theme Installed Dot Net Frameworks : Not Detected in Registry Installed Powershell Versions : N/A Security Product Name{s} : No Security Installed Defender Tamper Protection : Disabled Defender Service Status : Boot Windows Firewall Service State : Running {Reg: Auto} Windows Activation Status : Unknown State Windows Licence Reason : No issues found, a valid key for the product's licensing channel used Windows Product Key Channel : N/A Device has KMS Enabled : No KMS Auto Renewal (hook) : No MS Office {MSI/Traditional} : Not Detected C2R MS Office : Not Detected C2R Excluded Apps : N/A C2R Last Update Channel : N/A C2R Office Activation Status : N/A C2R Partial Product Key : N/A Office Reason Information : No reason information to show/No Issues Office MAK/KMS Information : No MAK or KMS activation detected ------------------------------------------------------------------------------------------------------------------- == P.S. i think the correct wording should be "VL activation expires in.." Code: Office MAK/KMS Information: Automatically re-activates in 179 Days / 257835 minutes
Changed kms wording for next qt. No idea why i worded it as it was before. Busy weekend so not much time until monday.
Uploaded GUI_QTv0.10.3.10 , post #3 updated. Added experimental support for DDR5 not 100% sure of result value (32 - 35 Decimal) so if QT not get it right for name then it will show the result numeric value (hopefully) so i can then adjust the code to be correct. As i do not have any DDR5 computers to test it is just a guess. On w7 the 'Memory Type' was either N/A or blank, have added a new routine for that to pick the result better although as above DDR5 is experimental and may not show anything. Updated a few text lines. Manged to find a bit of time between being busy Next MRP and old type QT will be updated with the correct DDR5 info when available, at moment it is experimental code used.
Something i have added to the next GUI QT ... Added 'OS Info tab 2 ' Spoiler: Next GUI QT Results Code: ------------------------------------------------------------------------------------------------------------------- Query Tool GUI v0.10.3.10 ------------------------------------------------------------------------------------------------------------------- Log Date {UTC}: 12/04/2022 -- 15:17 {24-hour} Some results may be shortened to fit the output stage, such as RAM information. This is the postable report that does not contain full serial or sensitive information. GUI Font Used : Lucida Console Size: 11 =================================================================================================================== Operating System Information =================================================================================================================== Installation Type : Client Name : Microsoft Windows 10 Education OS/CPU Architecture : CPU and OS is 64 bit Build : 10.0.19045 {UBR:2251} {22H2} Language : English (United Kingdom) Native Language : English Installed/Available Languages : en-GB en-US Stock Keeping Unit {SKU} : 121 Experience Pack : 120.2212.4180.0 Installation Date : 12/13/2021 at 15:48 PM {UTC} Shipped with Reserved 7GB : No Dirty Shutdown Count : 6 Build Branch : vb_release Product ID : 00328-00000-00000-AA973 {Extended: 03612-03280-000-000000-00-2057-19043.0000-3472021} TimeZone {TZUtil} : GMT Standard Time Hours offset from GMT : 0 Daylight Saving In Effect : No Daylight Adjust Clock Mode : Enabled/Checked Upgrade or Clean Installation : Upgraded on 2/14/2022 {UTC} Previous OS Upgraded From : Windows 7 Home Premium Hypervisor Present : No Virtual Machine Data : This computer does not appear to be a virtual machine Windows Key 1 Installed : 7CFBY (Last 5 digits shown) Windows DpID4 Installed : 7CFBY (Last 5 digits shown) Windows Default Installed : 8HV2C (Last 5 digits shown) Windows Default4 Installed : 8HV2C (Last 5 digits shown) TPM Information : N/A StorageSense Policy : Disabled {0x0} Number of Licensed Users : 1 Data Execution Prevention : OptIn/Default {Ref: 2} DEP Available : Yes DEP 32Bit Applications : Yes DEP Drivers : Yes DEP Support Policy : Enabled for OS Kernel, essential binaries and all Windows-based Services. Clipboard History Service : Disabled {Value:4} Clipboard History : Disabled {0} Allow Cross Device History : Disabled {0} Allow Clipboard History : Disabled {0} Current Power Policy Used : Home/Office Desk Power Plans Available : Balanced Only {Others may be 'hidden'} Current Active Power Plan : Balanced =================================================================================================================== Booted System Drive Partition Information =================================================================================================================== Drive Type : SSD BUS Type : ATA Total Space : 86.81 GB Free Space : 19.4 GB Partition Type : MBR Firmware Boot Type : Legacy/MBR Mode {R:1} Secure Boot Status : N/A File System : NTFS System Drive Letter : C: Disk and Partition Information : Driveletter | Disk #, Partition # | Model Name {50 Chars max} | Size 'GB' \\.\PHYSICALDRIVE0 C: | Disk #0, Partition #1 | TAISU SSD 120G | 86.81 GB \\.\PHYSICALDRIVE0 D: | Disk #0, Partition #2 | TAISU SSD 120G | 24.41 GB \\.\PHYSICALDRIVE1 E: | Disk #1, Partition #0 | TOSHIBA MQ01ABD100 | 931.51 GB Drive letters/Partitions are shown as they are defined via the connected ports in the BIOS. =================================================================================================================== Memory Information =================================================================================================================== Total Physical : 8302864 KB (7.92 GB) Available Physical : 5518816 KB (5.26 GB) Total Page Size : 8827152 KB (8.42 GB) Available Page Size : 5909720 KB (5.64 GB) Total Virtual Size : 4194176 KB (4 GB) Available Virtual : 4013964 KB (3.83 GB) Memory Type : DDR3 {24} Memory Error Correction : Non-ECC Memory Slots Fitted : 4 DIMM Information {First Four} : ChannelA-DIMM0 4096MB @ 1333MHz ChannelB-DIMM0 4096MB @ 1333MHz =================================================================================================================== Graphics Information =================================================================================================================== Adaptor Name : Intel(R) HD Graphics 4600 Adaptor DACType : Interna Adaptor Driver Information : 20.19.15.4624 {2017/03/08} Adaptor Status : Active Adaptor Name : NVIDIA GeForce GTX 860M Adaptor DACType : Integrated RAMDAC {Addon} Adaptor Driver Information : 31.0.15.1659 {2022/06/23} Adaptor Status : Inactive Virtual Desktop Resolution : 1536 x 864 Bits Per Pixel : 32 Video Mode Description : 1920 x 1080 x 4294967296 colors {Ref:1} Some values may not be accurate due to 32 bit API limitations. =================================================================================================================== Network Adaptor Information =================================================================================================================== Adaptor 1 Name : Intel(R) Dual Band Wireless-AC 7260 Connection Status : Connected Adaptor 2 Name : Realtek PCIe GbE Family Controller Connection Status : Media Disconnected =================================================================================================================== Processor 1 Information =================================================================================================================== Name : Intel(R) Core(TM) i7-4610M CPU @ 3.00GHz Architecture {Bits} : 64 L2 Cache Size {KB} : 512 L3 Cache Size {KB} : 4096 Current Speed {MHz} : 3001 Physical Cores : 2 Logical Cores : 4 Processor Id : BFEBFBFF000306C3 Virtualization Mode : Enabled Manufacturer : GenuineIntel [Intel] Description : Intel64 Family 6 Model 60 Stepping 3 =================================================================================================================== DMI/BIOS Information =================================================================================================================== System Manufacturer : Clevo System Product Name : W230SS BaseBoard Manufacturer : Clevo BaseBoard Product : W230SS BaseBoard Version : Not Applicable BIOS Vendor : American Megatrends Inc. BIOS Release Date : 04/08/2015 BIOS Version : 4.6.5 Primary BIOS : True SMBIOS Present : True SMBIOS Version : 2.7 SLIC/BIOS Data : ALASKA - 1072009 Valid SLIC Name : No Valid SLIC Table Possible Brand Theme : Clevo {System Manufacturer} SLIC Table Status : No valid SLIC table Emulated SLIC : Not required/used for this OS MSDM Key Description : No MSDM key Description found MSDM Key Detected : Not Present MSDM Key OS Version/Edition : N/A =================================================================================================================== Miscellaneous Information =================================================================================================================== Which MRP Version Used : CY21M12D12-R141.BL Wallpaper Style : Stretch image to display resolution Current Theme Used : mx.theme Installed Dot Net Frameworks : 2.0 3.0 3.5 4.8 4.0 Installed Powershell Versions : 1.0, 2.0, 3.0, 4.0, 5.0, 5.1 Security Product Name{s} : 360 Total Security Defender Tamper Protection : Disabled Defender Service Status : Disabled Windows Firewall Service State : Running {Reg: Auto} Windows Activation Status : Activated Windows Licence Reason : No issues found, a valid key for the product's licensing channel used Windows Product Key Channel : Retail {RETAIL} with HWID {R:PKC} Device has KMS Enabled : No KMS Auto Renewal (hook) : No MS Office {MSI/Traditional} : Not Checked as a C2R version detected C2R MS Office : Office 21, VOLUME_KMSCLIENT channel {x86} C2R Excluded Apps : lync,onedrive,onenote,outlook,teams C2R Last Update Channel : Production 2021 LTSC C2R Office Activation Status : Licensed C2R Partial Product Key : 6F7TH Office Reason Information : Activated but verify the products use rights Office MAK/KMS Information : Will require re-activation in 147 Days / 212981 minutes ------------------------------------------------------------------------------------------------------------------- Updated previous post with new download link
Updated #3 download link with the latest GUI QT v0.10.3.14. Slightly better Hypervisor present detection , although on Vista/7 a certain WMI Object is not present so have hopefully got a workaround in place for at least VMWare ,VBox, QEMU and Xen. Hyper-V may not be detected if on Win7 or below. Added For CPU: Motherboard Connection (Socket) Microcode for OS and BIOS. Getting the 'Motherboard Connection' (Socket) data was fun and games as Pshell way does not work on win7 or below, so had to resort to some WMI method that pulls the info from the OS's database, this may not always be up to date and m$ may not even update that part of WMI so the results are what they are. Microcode was also a challenge, basically the revision or signature as pulled from the registry in Binary to Hex format. Powershell gets same info but that can be fussy on Vista/7 so opted for a registry read and parse which so far gives same results. Also added a bit more error checking and hopefully should not crash out, i cannot 100% guarantee that but it close. There may be other items added but i cant remember as spent another 6 hours+ getting the above two parts added and working.
Once the GUI QT has reached v1.x.x.x then the old QT will be retired from service as i cannot update both because i not have the time plus the old one looks a bit dated now.
There is a way to go before GUI one reaches v1 But not as much will be done to old QT as it is about as far as i can go with it now. Still adding bits to the new one in a like for like with the old qt. Some i may have to rework to get to work some will be just the scripts where need added internally to be run to get the results. The old qt will not be deleted as it will then be left as legacy - until no one downloads it and the file host deletes it. I will still have copies of the old QT regardless.
MRP148 is almost ready Not a huge amount done this time, mainly a interim version with a few internal updates added. Plus 2 w1x options and a couple updated.