Multi-OEM/Retail Project {MRP} - Mk3

Well the code it still there just reduced letters it looks at. There is a way with wmic logicaldisk get deviceid, drivetype and parse that for device type 5 or 2 but as the project not failed in that area before i see no reason to add even more code so it will stay as it is.

 

I will consider the code change.

 

The FOR /F loop does not check C to Z, it works in reverse! ie Z - C in this case. so it would still cause problems as the code you posted would start at Z and go backwards to C which would 'see' the card reader before the usb/DVD drives.

It also depends on how the bios is set up too in the order it looks to boot.

 

Windows can yes, it is complicated to explain what is happening. @s1ave77 may be able to explain better than i could.

 

Have adjusted code as follows, i will do a test, if it causes problems then i will revert it back to how it was. As you can see i have reversed the letter order as the FOR loop will check the last ( D ) first then look in each letter until it reaches ( Z ). Don't ask me why Windows does it back to front it's just a quirk how it does it.

Code:

FOR %%i IN (Z Y X W V U T S R Q P O N M L K J I H G F E D) DO DIR %%i:>NUL 2>&1 && SET zz=!zz!%%i
FOR %%i IN (%zz%) DO IF EXIST "%%i:\Sources\PID.TXT" SET "PIDtxtFile=%%i:\Sources\PID.TXT"

 

I avoided using the 'SetLocal EnableExtensions EnableDelayedExpansion' before as for some reason it caused some strange effects , but will do a test install if it works then the code will stay, any problems it will be reverted back. I cannot be fairer than that.

 

Using the example that there is a PID.TXT in F:\Sources and also one in D:\Sources. The PID i want to find is in the D drive.

The FOR loop (C D E F ----- Z) will result in: F:\Sources\PID.TXT

Using reverse logic ( Z Y X ---- C) the result is: D:\Sources\PID.TXT which is correct.

I think this explains how the FOR loop works ie in reverse lookup in this instance.

The reason i check D first is because as we know drives start with A to Z. A & B floppies as was, C onwards usually are HDD's first then onto removable drives... Well that how it used to be lol.

Anyway i am just about to compile a test then install...

 

almost at username bit, gez always takes ages when you in a rush lol

 

Spoiler: Results.... 78.0.RC2

Code:

Multi-OEM/Retail Project Version : 171214-R78.0.RC2 - RC  [MRP/MDL]
 
Required project files extracted successfully.
 
OEM's folder detected, structure appears OK.
 
Detected Config File          - Checking For User Options...
                              - Options Pre-Check Completed.
 
MRP Logging Mode              : Enhanced
Confirm File Delete           : Enabled
W10 TitleBar Color            : Enabled  - Title Bars will be colorized to Blue.
Hi-Lite Colorization          : Enabled  - Hi-Lited Text will be colorized to Blue.
Show 'ThisPC' On Desktop      : Enabled
 
OS Installation Date/Time     : 14/12/2017 -- 6:13pm
 
[OSINF] =======================
[OSINF] Detected OS Information
[OSINF] =======================
[OSINF] Version Installed     : Windows 10 Pro x64
[OSINF] Edition {Registry}    : Professional
[OSINF] Edition {WMIC}        : Professional
[OSINF] Build Information     : 16299.15.amd64fre.rs3_release.170928-1534
[OSINF] Update Build Revision : 64 {Baseline Refresh}
[OSINF] Edition Language/Code : en-GB / 2057 {809h}
[OSINF] Locale                : en-GB
[OSINF] Language Name Value   : ENG
[OSINF] =======================
 
[MBINF] =======================
[MBINF] Motherboard Information
[MBINF] =======================
[MBINF] #01 CS Product Name   : [VGN-AW21M_H]
[MBINF] #02 CS Model Name     : [VGN-AW21M_H]
[MBINF] #04 CS Vendor Name    : [Sony Corporation]
[MBINF] #05 CS System Name    : [Sony Corporation]
[MBINF] #06 Baseboard Name    : [Sony Corporation]
[MBINF] #08 BIOS or SLIC ID   : [Sony]
[MBINF] #09 SLIC Information  : [2.1]
[MBINF] =======================
 
[CMINF] =======================
[CMINF] CPU/Memory  Information
[CMINF] =======================
[CMINF] CPU Name/Type         : [Intel{R} Core{TM}2 Duo CPU     P8600  @ 2.40GHz]
[CMINF] CPU Description       : [Intel64 Family 6 Model 23 Stepping 10]
[CMINF] CPU Architecture      : [32/64 Bit Instruction Set]
[CMINF] CPU Cores/Threads     : [2] / [2]
[CMINF] Total Physical Memory : [4063 Mb]
[CMINF] Available Memory      : [3517 Mb]
[CMINF] =======================
 
[HDTYP] Info: HDD Detected.
 
[SATOU] -> Show User options enabled/applied.
[FEXTS] Show File Extensions option enabled.
[REMSC] Remove '-Shortcut' reference from icons option enabled.
[AMSRT] Disable 'Malicious Software Removal Tool' tweak applied.
[GO2TP] Launch To 'ThisPC' instead of 'Quick Access' view option enabled.
[APPDT] Apps use 'Dark Theme' option enabled.
[REMPB] Remove 'People Band' option enabled.
[REM1D] Prevent One Drive from installing tweak enabled.
[REM6F] Remove 'Library Folders' from 'ThisPC' view tweak applied.
[REM3D] Remove '3D Objects Folder' from 'ThisPC' view tweak applied.
[MTTBT] Extra TaskBar Transparency option enabled.
[AWLBM] Use 'F8' Legacy Boot Menu tweak applied.
[NOAMT] Disable 'Automatic Computer Maintenance Tasks' tweak applied.
[AUTOL] MRP System Drive rename option enabled, 'Local Disk' changed to 'Windows_10_Pro'.
[PKEIC] -> PID.txt/ei.cfg Detection.
[PKEIC] The PID.txt file was not detected.
[PKEIC] The ei.cfg file "D:\Sources\EI.CFG" was detected.
[CKDMI] Querying BIOS for any manufacturer brand information.
[THMOK] Sony [#04] manufacturer detected for automated theme/branding.
[CHKMN] Computer Model Name: 'VGN-AW21M_H' has been applied.
[BRND1] -> Branding Extra Checks Section.
[USRFT] CustomTheme option was not used.
[THMMS] -> OEM Brand Transfer Management Section.
[WPCHK] Wallpaper.jpg transferred.
[BGDFC] Desktop backgrounds folder created.
[BGDFC] BackgroundDefault.jpg created from Wallpaper.jpg.
[W8XAP] -> Windows 10: User Account Picture Management {1}.
[RMXML] OOBE.xml file processed.
[UBREP] User.bmp replaced.
[UPREP] User.png replaced.
[UPREP] User-40.png replaced.
[WXAP2] -> Windows 10: User Account Picture Management {2}.
[UPREP] User-32.png replaced.
[UPREP] User-48.png replaced.
[UPREP] User-192.png replaced.
[WX81S] Lock Screen {img105.jpg} replaced. Original renamed as img0105.jpg.
[WX81S] Log-In Background {img100.jpg} replaced. Original renamed as img0100.jpg.
[OTFTS] -> OEM Theme Files Transfer Section.
[OTFTS] OEM theme folder has been created.
[OTFTS] OEM files have been transferred.
[ATHBA] Sony theme has been applied.
[BSHCS] Branding script has completed.

As you can see the pid/ei check was ok but it screwed up the project!

It not set the Runonce part for the addon manager etc so the project did not fully complete.

Not a happy bunny.

 

Will try another way without the setlocal stuff...

 

78.0.T3 (without the !zz! ie set zz=%%i) and no Local expansions) -- worked ok

so trying a change of tactics with the expansion stuff on T4. I have to alter some important code that calls the add-on manager etc so if this is a success then the code will be left in.

Will post results shortly....

 

Spoiler: 78.0.RC4 Log...

Code:

Multi-OEM/Retail Project Version : 171214-R78.0.RC4 - RC  [MRP/MDL]
 
Required project files extracted successfully.
 
OEM's folder detected, structure appears OK.
 
Detected Config File          - Checking For User Options...
                              - Options Pre-Check Completed.
 
MRP Logging Mode              : Enhanced
Confirm File Delete           : Enabled
W10 TitleBar Color            : Enabled  - Title Bars will be colorized to Blue.
Hi-Lite Colorization          : Enabled  - Hi-Lited Text will be colorized to Blue.
Show 'ThisPC' On Desktop      : Enabled
 
OS Installation Date/Time     : 14/12/2017 -- 7:41pm
 
[OSINF] =======================
[OSINF] Detected OS Information
[OSINF] =======================
[OSINF] Version Installed     : Windows 10 Pro x64
[OSINF] Edition {Registry}    : Professional
[OSINF] Edition {WMIC}        : Professional
[OSINF] Build Information     : 16299.15.amd64fre.rs3_release.170928-1534
[OSINF] Update Build Revision : 64 {Baseline Refresh}
[OSINF] Edition Language/Code : en-GB / 2057 {809h}
[OSINF] Locale                : en-GB
[OSINF] Language Name Value   : ENG
[OSINF] =======================
 
[MBINF] =======================
[MBINF] Motherboard Information
[MBINF] =======================
[MBINF] #01 CS Product Name   : [VGN-AW21M_H]
[MBINF] #02 CS Model Name     : [VGN-AW21M_H]
[MBINF] #04 CS Vendor Name    : [Sony Corporation]
[MBINF] #05 CS System Name    : [Sony Corporation]
[MBINF] #06 Baseboard Name    : [Sony Corporation]
[MBINF] #08 BIOS or SLIC ID   : [Sony]
[MBINF] #09 SLIC Information  : [2.1]
[MBINF] =======================
 
[CMINF] =======================
[CMINF] CPU/Memory  Information
[CMINF] =======================
[CMINF] CPU Name/Type         : [Intel{R} Core{TM}2 Duo CPU     P8600  @ 2.40GHz]
[CMINF] CPU Description       : [Intel64 Family 6 Model 23 Stepping 10]
[CMINF] CPU Architecture      : [32/64 Bit Instruction Set]
[CMINF] CPU Cores/Threads     : [2] / [2]
[CMINF] Total Physical Memory : [4063 Mb]
[CMINF] Available Memory      : [3515 Mb]
[CMINF] =======================
 
[HDTYP] Info: HDD Detected.
 
[SATOU] -> Show User options enabled/applied.
[FEXTS] Show File Extensions option enabled.
[REMSC] Remove '-Shortcut' reference from icons option enabled.
[AMSRT] Disable 'Malicious Software Removal Tool' tweak applied.
[GO2TP] Launch To 'ThisPC' instead of 'Quick Access' view option enabled.
[APPDT] Apps use 'Dark Theme' option enabled.
[REMPB] Remove 'People Band' option enabled.
[REM1D] Prevent One Drive from installing tweak enabled.
[REM6F] Remove 'Library Folders' from 'ThisPC' view tweak applied.
[REM3D] Remove '3D Objects Folder' from 'ThisPC' view tweak applied.
[MTTBT] Extra TaskBar Transparency option enabled.
[AWLBM] Use 'F8' Legacy Boot Menu tweak applied.
[NOAMT] Disable 'Automatic Computer Maintenance Tasks' tweak applied.
[AUTOL] MRP System Drive rename option enabled, 'Local Disk' changed to 'Windows_10_Pro'.
[PKEIC] -> PID.txt/ei.cfg Detection.
[PKEIC] The PID.txt file was not detected.
[PKEIC] The ei.cfg file was not detected.
[CKDMI] Querying BIOS for any manufacturer brand information.
[THMOK] Sony [#04] manufacturer detected for automated theme/branding.
[CHKMN] Computer Model Name: 'VGN-AW21M_H' has been applied.
[BRND1] -> Branding Extra Checks Section.
[USRFT] CustomTheme option was not used.
[THMMS] -> OEM Brand Transfer Management Section.
[WPCHK] Wallpaper.jpg transferred.
[BGDFC] Desktop backgrounds folder created.
[BGDFC] BackgroundDefault.jpg created from Wallpaper.jpg.
[W8XAP] -> Windows 10: User Account Picture Management {1}.
[RMXML] OOBE.xml file processed.
[UBREP] User.bmp replaced.
[UPREP] User.png replaced.
[UPREP] User-40.png replaced.
[WXAP2] -> Windows 10: User Account Picture Management {2}.
[UPREP] User-32.png replaced.
[UPREP] User-48.png replaced.
[UPREP] User-192.png replaced.
[WX81S] Lock Screen {img105.jpg} replaced. Original renamed as img0105.jpg.
[WX81S] Log-In Background {img100.jpg} replaced. Original renamed as img0100.jpg.
[OTFTS] -> OEM Theme Files Transfer Section.
[OTFTS] OEM theme folder has been created.
[OTFTS] OEM files have been transferred.
[ATHBA] Sony theme has been applied.
[BSHCS] Branding script has completed.
 
[ADMAN] Add-On Manager: Started.
[SATOU] -> Show User options applied.
[FEXTS] Show File Extensions tweak applied.
[REMSC] Remove '-Shortcut' on icons tweak applied.
[REMPB] Remove 'People Band' tweak applied.
[GO2TP] LaunchTo 'ThisPC' instead of 'Quick Access' tweak applied.
[APPDT] Apps use 'Dark Theme' tweak applied.
[REM1D] Prevent One Drive from installing tweak applied.
[MTTBT] Extra TaskBar Transparency tweak applied.
[CMSDM] Querying BIOS for MSDM data.
[CMSDM] No MSDM Table/Key detected in BIOS.
[USRAC] Windows 10: Enhanced Log-On screen has been enabled.
[WXSTB] Windows 10: 'Blue' Title Bar Colorization applied.
[USRAC] 'User Account Picture' registry entry applied.
[USRRO] Windows 'Registered Owner' {Winver} registry entry corrected.
[USRD0] Detected 'defaultuser0', removal process started.
[RDUPM] Removal of 'defaultuser0' account completed.
[AMBPS] -> Checking BIOS/Boot mode and OS HDD/SDD partition type.
[AMBPS] BIOS/Boot Mode : Legacy
[AMBPS] Partition Type : MBR
[AMHDC] SSD/HDD Mode   : AHCI
[CHKLS] -> Check if Windows is activated/licensed.
[CHKLS] License Status: Notification
[OSLRC] License Status Reason Code: 0xC004F034
[OSLRT] License not found/invalid or could not connect to the Activation Server.
[CHKLS] Online connection maybe required to complete activation.
[AMUTC] UserTweaks.cmd file is present.
[AMUTC] UserTweaks completed without errors.
[ADMAN] Add-On Manager: Completed.
[CLNUP] MRP Clean Up Routine Processed.
 
=========================================================================================
= Please Note: It is advisable to log out or reboot your computer when possible to      =
=              allow Windows 10 to finalize any settings/User Pictures etc.             =
=                                                                                       =
=              If you have used any tweak options within the configuration file then    =
=              it is required to do a log out or reboot cycle to allow these options    =
=              to take effect.                                                          =
=========================================================================================
 
The Multi-OEM/Retail Project has completed.

Correction it NOT detected the ei.cfg !!!

 

Reverting back to T3 that did work.

Something not working as intended.

 

Spoiler: MRP 78.0 RC5 log

Code:

Multi-OEM/Retail Project Version : 171214-R78.0.RC5 - RC  [MRP/MDL]
 
Required project files extracted successfully.
 
OEM's folder detected, structure appears OK.
 
Detected Config File          - Checking For User Options...
                              - Options Pre-Check Completed.
 
MRP Logging Mode              : Enhanced
Confirm File Delete           : Enabled
W10 TitleBar Color            : Enabled  - Title Bars will be colorized to Blue.
Hi-Lite Colorization          : Enabled  - Hi-Lited Text will be colorized to Blue.
Show 'ThisPC' On Desktop      : Enabled
 
OS Installation Date/Time     : 14/12/2017 -- 8:28pm
 
[OSINF] =======================
[OSINF] Detected OS Information
[OSINF] =======================
[OSINF] Version Installed     : Windows 10 Pro x64
[OSINF] Edition {Registry}    : Professional
[OSINF] Edition {WMIC}        : Professional
[OSINF] Build Information     : 16299.15.amd64fre.rs3_release.170928-1534
[OSINF] Update Build Revision : 64 {Baseline Refresh}
[OSINF] Edition Language/Code : en-GB / 2057 {809h}
[OSINF] Locale                : en-GB
[OSINF] Language Name Value   : ENG
[OSINF] =======================
 
[MBINF] =======================
[MBINF] Motherboard Information
[MBINF] =======================
[MBINF] #01 CS Product Name   : [VGN-AW21M_H]
[MBINF] #02 CS Model Name     : [VGN-AW21M_H]
[MBINF] #04 CS Vendor Name    : [Sony Corporation]
[MBINF] #05 CS System Name    : [Sony Corporation]
[MBINF] #06 Baseboard Name    : [Sony Corporation]
[MBINF] #08 BIOS or SLIC ID   : [Sony]
[MBINF] #09 SLIC Information  : [2.1]
[MBINF] =======================
 
[CMINF] =======================
[CMINF] CPU/Memory  Information
[CMINF] =======================
[CMINF] CPU Name/Type         : [Intel{R} Core{TM}2 Duo CPU     P8600  @ 2.40GHz]
[CMINF] CPU Description       : [Intel64 Family 6 Model 23 Stepping 10]
[CMINF] CPU Architecture      : [32/64 Bit Instruction Set]
[CMINF] CPU Cores/Threads     : [2] / [2]
[CMINF] Total Physical Memory : [4063 Mb]
[CMINF] Available Memory      : [3526 Mb]
[CMINF] =======================
 
[HDTYP] Info: HDD Detected.
 
[SATOU] -> Show User options enabled/applied.
[FEXTS] Show File Extensions option enabled.
[REMSC] Remove '-Shortcut' reference from icons option enabled.
[AMSRT] Disable 'Malicious Software Removal Tool' tweak applied.
[GO2TP] Launch To 'ThisPC' instead of 'Quick Access' view option enabled.
[APPDT] Apps use 'Dark Theme' option enabled.
[REMPB] Remove 'People Band' option enabled.
[REM1D] Prevent One Drive from installing tweak enabled.
[REM6F] Remove 'Library Folders' from 'ThisPC' view tweak applied.
[REM3D] Remove '3D Objects Folder' from 'ThisPC' view tweak applied.
[MTTBT] Extra TaskBar Transparency option enabled.
[AWLBM] Use 'F8' Legacy Boot Menu tweak applied.
[NOAMT] Disable 'Automatic Computer Maintenance Tasks' tweak applied.
[AUTOL] MRP System Drive rename option enabled, 'Local Disk' changed to 'Windows_10_Pro'.
[PKEIC] -> PID.txt/ei.cfg Detection.
[PKEIC] The PID.txt file was not detected.
[PKEIC] The ei.cfg file "D:\Sources\ei.cfg" was detected.
[CKDMI] Querying BIOS for any manufacturer brand information.
[THMOK] Sony [#04] manufacturer detected for automated theme/branding.
[CHKMN] Computer Model Name: 'VGN-AW21M_H' has been applied.
[BRND1] -> Branding Extra Checks Section.
[USRFT] CustomTheme option was not used.
[THMMS] -> OEM Brand Transfer Management Section.
[WPCHK] Wallpaper.jpg transferred.
[BGDFC] Desktop backgrounds folder created.
[BGDFC] BackgroundDefault.jpg created from Wallpaper.jpg.
[W8XAP] -> Windows 10: User Account Picture Management {1}.
[RMXML] OOBE.xml file processed.
[UBREP] User.bmp replaced.
[UPREP] User.png replaced.
[UPREP] User-40.png replaced.
[WXAP2] -> Windows 10: User Account Picture Management {2}.
[UPREP] User-32.png replaced.
[UPREP] User-48.png replaced.
[UPREP] User-192.png replaced.
[WX81S] Lock Screen {img105.jpg} replaced. Original renamed as img0105.jpg.
[WX81S] Log-In Background {img100.jpg} replaced. Original renamed as img0100.jpg.
[OTFTS] -> OEM Theme Files Transfer Section.
[OTFTS] OEM theme folder has been created.
[OTFTS] OEM files have been transferred.
[ATHBA] Sony theme has been applied.
[BSHCS] Branding script has completed.
 
[ADMAN] Add-On Manager: Started.
[SATOU] -> Show User options applied.
[FEXTS] Show File Extensions tweak applied.
[REMSC] Remove '-Shortcut' on icons tweak applied.
[REMPB] Remove 'People Band' tweak applied.
[GO2TP] LaunchTo 'ThisPC' instead of 'Quick Access' tweak applied.
[APPDT] Apps use 'Dark Theme' tweak applied.
[REM1D] Prevent One Drive from installing tweak applied.
[MTTBT] Extra TaskBar Transparency tweak applied.
[CMSDM] Querying BIOS for MSDM data.
[CMSDM] No MSDM Table/Key detected in BIOS.
[USRAC] Windows 10: Enhanced Log-On screen has been enabled.
[WXSTB] Windows 10: 'Blue' Title Bar Colorization applied.
[USRAC] 'User Account Picture' registry entry applied.
[USRRO] Windows 'Registered Owner' {Winver} registry entry corrected.
[USRD0] Detected 'defaultuser0', removal process started.
[RDUPM] Removal of 'defaultuser0' account completed.
[AMBPS] -> Checking BIOS/Boot mode and OS HDD/SDD partition type.
[AMBPS] BIOS/Boot Mode : Legacy
[AMBPS] Partition Type : MBR
[AMHDC] SSD/HDD Mode   : AHCI
[CHKLS] -> Check if Windows is activated/licensed.
[CHKLS] License Status: Notification
[OSLRC] License Status Reason Code: 0xC004F034
[OSLRT] License not found/invalid or could not connect to the Activation Server.
[CHKLS] Online connection maybe required to complete activation.
[AMUTC] UserTweaks.cmd file is present.
[AMUTC] UserTweaks completed without errors.
[ADMAN] Add-On Manager: Completed.
[CLNUP] MRP Clean Up Routine Processed.
 
=========================================================================================
= Please Note: It is advisable to log out or reboot your computer when possible to      =
=              allow Windows 10 to finalize any settings/User Pictures etc.             =
=                                                                                       =
=              If you have used any tweak options within the configuration file then    =
=              it is required to do a log out or reboot cycle to allow these options    =
=              to take effect.                                                          =
=========================================================================================
 
The Multi-OEM/Retail Project has completed.

Spoiler: 78.0.RC5 W7 log.

Code:

Multi-OEM/Retail Project Version : 171214-R78.0.RC5 - RC  [MRP/MDL]
 
Required project files extracted successfully.
 
OEM's folder detected, structure appears OK.
 
Detected Config File          - Checking For User Options...
                              - Options Pre-Check Completed.
 
MRP Logging Mode              : Enhanced
Show 'My Computer' On Desktop : Enabled
 
OS Installation Date/Time     : Thu 12/14/2017 -- 9:50pm
 
[OSINF] =======================
[OSINF] Detected OS Information
[OSINF] =======================
[OSINF] Version Installed     : Windows 7 Professional x64
[OSINF] Edition {Registry}    : Professional
[OSINF] Edition {WMIC}        : Professional
[OSINF] Build Information     : 7601.23807.amd64fre.win7sp1_ldr.170512-0600
[OSINF] Edition Language/Code : en-US / 1033 {409h}
[OSINF] Locale                : en-US
[OSINF] Language Name Value   : ENU
[OSINF] =======================
 
[MBINF] =======================
[MBINF] Motherboard Information
[MBINF] =======================
[MBINF] #01 CS Product Name   : [VGN-AW21M_H]
[MBINF] #02 CS Model Name     : [VGN-AW21M_H]
[MBINF] #04 CS Vendor Name    : [Sony Corporation]
[MBINF] #05 CS System Name    : [Sony Corporation]
[MBINF] #06 Baseboard Name    : [Sony Corporation]
[MBINF] #08 BIOS or SLIC ID   : [Sony]
[MBINF] #09 SLIC Information  : [v2.1]
[MBINF] =======================
 
[CMINF] =======================
[CMINF] CPU/Memory  Information
[CMINF] =======================
[CMINF] CPU Name/Type         : [Intel{R} Core{TM}2 Duo CPU     P8600  @ 2.40GHz]
[CMINF] CPU Description       : [Intel64 Family 6 Model 23 Stepping 10]
[CMINF] CPU Architecture      : [32/64 Bit Instruction Set]
[CMINF] CPU Cores/Threads     : [2] / [2]
[CMINF] Total Physical Memory : [4063 Mb]
[CMINF] Available Memory      : [3466 Mb]
[CMINF] =======================
 
[HDTYP] Info: SSD Detected.
 
[SATOU] -> Show User options enabled/applied.
[FEXTS] Show File Extensions option enabled.
[REMSC] Remove '-Shortcut' reference from icons option enabled.
[AMSRT] Disable 'Malicious Software Removal Tool' tweak applied.
[AUTOL] MRP System Drive rename option enabled, 'Local Disk' changed to 'Windows_7_Pro'.
[PKEIC] -> PID.txt/ei.cfg Detection.
[PKEIC] The PID.txt file was not detected.
[PKEIC] The ei.cfg file "D:\Sources\ei.cfg" was detected.
[CKDMI] Querying BIOS for any manufacturer brand information.
[DSLIC] Detecting any SLIC information.
[SCKV7] Sony [#08] SLIC manufacturer found for possible Windows 7 OEM activation.
[THMOK] Sony [#04] manufacturer detected for automated theme/branding.
[CHKKD] -> Checking database for OEM-SLP Product Key.
[KEYOK] Sony OEM-SLP Product Key found and applied.
[XRMAN] -> OEM XRM-MS Certificate Management.
[XRMOK] Sony {C2} XRM-MS OEM Certificate will be applied.
[OEASC] OEM activation subroutine created.
[OASHC] OEM activation subroutine has completed.
[CHKMN] Computer Model Name: 'VGN-AW21M_H' has been applied.
[BRND1] -> Branding Extra Checks Section.
[USRFT] CustomTheme option was not used.
[X64RF] Registry fix for x64 theme applied.
[THMMS] -> OEM Brand Transfer Management Section.
[WPCHK] Wallpaper.jpg transferred.
[BGDFC] Desktop backgrounds folder created.
[BGDFC] BackgroundDefault.jpg created from Wallpaper.jpg.
[UBREP] User.bmp replaced.
[OTFTS] -> OEM Theme Files Transfer Section.
[OTFTS] OEM theme folder has been created.
[OTFTS] OEM files have been transferred.
[ATHBA] Sony theme has been applied.
[BSHCS] Branding script has completed.
 
[ADMAN] Add-On Manager: Started.
[SATOU] -> Show User options applied.
[FEXTS] Show File Extensions tweak applied.
[REMSC] Remove '-Shortcut' on icons tweak applied.
[AMBPS] -> Checking BIOS/Boot mode and OS HDD/SDD partition type.
[AMBPS] BIOS/Boot Mode : Legacy
[AMBPS] Partition Type : MBR
[AMHDC] SSD/HDD Mode   : AHCI
[CHKLS] -> Check if Windows is activated/licensed.
[CHKLS] License Status: Licensed
[AMUTC] UserTweaks.cmd file is present.
[AMUTC] UserTweaks completed without errors.
[ADMAN] Add-On Manager: Completed.
[CLNUP] MRP Clean Up Routine Processed.
 
=========================================================================================
= Please Note: It is advisable to logout or reboot your computer when possible to       =
=              allow Windows to finalize any settings.                                  =
=                                                                                       =
=              If you have used any tweak options within the configuration file then    =
=              it is required to do a log out or reboot cycle to allow these options    =
=              to take effect.                                                          =
=========================================================================================
 
The Multi-OEM/Retail Project has completed.

Just to make sure nothing under the older OS's has been affected. All ok.

RC 5 worked. Its a revert to RC3.

If anyone wishes to test this version, let me know and i will upload the decompile.exe and give a link/password.