Need AMD SATA AHCI for WinXP

Hi,

I've been looking for AMD SATA AHCI driver for my notebook but couldn't find right one. Details are:

Model: HP Pavilion g4 Notebook
Processor: AMD A4-3330MX APU

I need AMD SATA AHCI Controller driver for WinXP. Please someone provide me right one so I can merge it into my XP installation and install it on my notebook. There are many on web but can't find right or suitable one.

There is no option in BIOS to change SATA mode to IDE.

EDIT:

Code:

[System Summary]
OS Name                             Microsoft Windows 7 Home Basic 
Version                                6.1.7601 Service Pack 1 Build 7601 
Other OS Description            Not Available 
OS Manufacturer                  Microsoft Corporation 
System Name                      UPLC 
System Manufacturer           Hewlett-Packard 
System Model                      HP Pavilion g4 Notebook PC 
System Type                       x64-based PC 
Processor             AMD A4-3330MX APU with Radeon(tm) HD Graphics, 2200 Mhz, 2 Core(s), 2 Logical Processor(s) 
BIOS Version/Date               Insyde F.65, 05-02-2013 
SMBIOS Version                  2.7 
Windows Directory              C:\Windows 
System Directory                C:\Windows\system32 
Boot Device                       \Device\HarddiskVolume1 
Locale                                India 
Hardware Abstraction Layer Version = "6.1.7601.17514" 
User Name                         UPLC\user 
Time Zone                         India Standard Time 
Installed Physical Memory (RAM)  2.00 GB 
Total Physical Memory   1.48 GB 
Available Physical Memory  479 MB 
Total Virtual Memory   2.96 GB 
Available Virtual Memory  1.41 GB 
Page File Space    1.48 GB 
Page File    C:\pagefile.sys

Code:

[IDE]
Name     AMD SATA Controller 
Manufacturer    AMD 
Status     OK 
PNP Device ID    PCI\VEN_1022&DEV_7804&SUBSYS_3564103C&REV_00\3&2411E6FE&3&88 
I/O Port    0x00003118-0x0000311F 
I/O Port    0x00003124-0x00003127 
I/O Port    0x00003110-0x00003117 
I/O Port    0x00003120-0x00003123 
I/O Port    0x00003100-0x0000310F 
Memory Address    0x9034E000-0x9034E7FF 
IRQ Channel    IRQ 19 
Driver     c:\windows\system32\drivers\amd_sata.sys (1.2.1.301, 77.63 KB (79,488 bytes), 17-06-2011 PM 04:38)

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

Sorry Bro, like others it didn't work too

Perhaps I forgot to mention it earlier:
Chipset Name- AMD A75
Chipset- Family 12h Processor Root Complex

 

After booting from WinXP installation media, there are various drivers loaded by windows like SCSI, Adaptec, Mylex, Dell, Intel RAID etc. and just after these are loaded I get a blue screen error.

Code:

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Technical information:

*** STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)

There is no special reason for installing WinXP which no longer receives security updates from MS. I just wanted to install it on first priority but now I think I should install Win7(x86) and leave aside this headache

 

What benefit can I get from your 1.5GB DVD? Did you try your DVD on AMD based notebooks such as this one mentioned above which has AMD SATA AHCI controllers? I am sure you will also be unable to install it on such notebooks/desktops running AMD SATA controllers because no valid AMD SATA controllers exist on web or released by manufacturers for XP.

I can install XP on any Intel based notebook or PCs in a matter of minute. It's not a big deal

Thanks.