well andyp, i can see that you are well versed in machine code been a while for me also to old now 50+ to many beers but you were talking about MMTOOL and i'm asking the one that come with your slictool MMTOOL v3.22 BKMOD i have an older asrock bios that doesn't have 1b mod and mmtool won't open it but old MMTool2.22.1. will load my old bios file i am just asking because if you are gonna dissasemble MMTool please have a look at the older one also sorry for ranting but your slictool is really good and it will only get better P.S. i can upload MMTool2.22.1 if you dont have it.. urie
It is probably a core 7 bios that gets slic'd in a different way. Yen knows how.. I haven't looked at these yet but I might do Point me to the BIOS... Andy
First, I want to thank you for your great effort I tried to flash the bios with factory tool from dos the flash is ok but the motherboard takes too much time to display bios information (error code 0E at the debug diplay behind the board) after that it boots ok Vista is now activated I tried to clear cmos the clear is ok but the side effect (too much delay in post) is still preasent
Did you load defaults as well. Clearing cmos and starting with defaults may help.. Have you also flashed the non-mod bios. To see if the S/S are similar or same.. Does the post hang at any particular point??What does the error code 0E mean...
Yes, before any try I flashed the original bios completely (including boot) I tried your bios with ctrl+home but the same result